ALCAN 2056 T3

Alloy Digest ◽  
2007 ◽  
Vol 56 (6) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Tensile Properties ◽  
Damage Tolerance ◽  
Heat Treating ◽  
Data Sheet ◽  
Good Balance ◽  
2024 Alloy ◽  
Clad Sheet ◽  
Zn Alloy

Abstract Alcan 2056 clad alloy is an Al-Cu-Mg-Zn alloy, designed to improve assembly corrosion resistance, while exhibiting a good balance of tensile properties and high damage tolerance properties.This data sheet covers Alcan 2056 as clad sheet. Tempers are presented that show improvement over the 2024 alloy. This datasheet provides information on tensile properties as well as fatigue. It also includes information on corrosion resistance as well as forming and heat treating. Filing Code: AL-404. Producer or source: Alcan Inc.

ALCAN 2027 T3511

Alloy Digest ◽  
2009 ◽  
Vol 58 (8) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Cross Sections ◽  
Damage Tolerance ◽  
Heat Treating ◽  
2024 Alloy ◽  
Zr Alloy

Abstract Alcan 2027 is an Al-Cu-Mg-Mn-Zr alloy, developed to provide higher strength and damage tolerance than the incumbent 2024 alloy. Alcan 2027 T3511 possesses good damage tolerance. This datasheet covers Alcan 2027 T3511 in both thin and the heavier cross sections. This datasheet provides information on composition, physical properties, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as forming and heat treating. Filing Code: AL-424. Producer or source: Alcan Inc.

ALCAN 2024-T3, T351X

Alloy Digest ◽  
2008 ◽  
Vol 57 (9) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Damage Tolerance ◽  
Heat Treating ◽  
2024 Alloy

Abstract This datasheet covers Alcan 2024 alloy in T3 and T351x tempers. The alloy possesses good damage tolerance. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: AL-417. Producer or source: Alcan Inc.

ALCAN 2024 T3, T351X TUBES

Alloy Digest ◽  
2010 ◽  
Vol 59 (6) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Damage Tolerance ◽  
Heat Treating ◽  
2024 Alloy

Abstract This datasheet covers Alcan 2024 alloy in T3 and T351x tempers for drawn tubes. The alloy possesses good damage tolerance. See also Alloy Digest Al-417, September 2008, for information about this alloy in extruded bar form. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: AL-429. Producer or source: Alcan Inc., Alcan Aerospace.

ALCAN 6156 T4, T62

Alloy Digest ◽  
2007 ◽  
Vol 56 (12) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Damage Tolerance ◽  
Heat Treating ◽  
Aerospace Applications ◽  
2024 Alloy

Abstract Alcan 6156 T4, T6 clad sheets were developed with weldability and high damage tolerance compared with incumbent 2024 alloy. Aerospace applications include fuselages clad sheets. This datasheet provides information on composition, physical properties, and tensile properties as well as fatigue. It also includes information on forming, heat treating, and joining. Filing Code: AL-408. Producer or source: Alcan Inc.

ALCAN 2297-T87

Alloy Digest ◽  
2008 ◽  
Vol 57 (7) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Fatigue Strength ◽  
Aluminum Alloys ◽  
Physical Properties ◽  
Tensile Properties ◽  
Damage Tolerance ◽  
Heat Treating ◽  
Equivalent Strength ◽  
Zr Alloy

Abstract Alcan 2297-T87 is an Al-Cu-Li-Mn-Zr alloy, developed to provide improved fatigue and damage tolerance with equivalent strength and corrosion resistance compared with incumbent alloy 2124-T851. The alloy possesses fatigue strength 3 to 5 times that of other aluminum alloys. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as forming and heat treating. Filing Code: AL-415. Producer or source: Alcan Inc.

ALCOA 5454

Alloy Digest ◽  
2003 ◽  
Vol 52 (12) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Road Transport ◽  
Data Sheet ◽  
Bend Strength

Abstract Alcoa alloy 5454 was developed specifically for use in the manufacture of aluminum tank trailer and dump bodies. This revision of the original Alloy Digest data sheet is also specific to road transport products and adds additional coverage to alloy 5454 H34. This datasheet provides information on composition, physical properties, tensile properties, and bend strength as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: AL-275. Producer or source: Alcoa Mill Products Inc. Originally published December 1986, revised December 2003.

ALCAN 6056 T4/T78

Alloy Digest ◽  
2010 ◽  
Vol 59 (7) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
2024 Alloy ◽  
Medium Strength ◽  
Weldable Alloy

Abstract Alcan 6056 alloy is an Al-Si-Mg-Zn-Cu-Mn weldable alloy, developed to provide medium strength similar to the incumbent 2024 alloy, with a lower density. This datasheet covers Alcan 6056 in several tempers as fuselage bare sheets. The alloy posesses, in several tempers, a superior combination of weldability, strength, and corrosion resistance. This datasheet provides information on composition, physical properties, microstructure, tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: AL-430. Producer or source: Alcan Inc. and Alcan Aerospace.

KAISER ALUMINUM ALLOY 2124

Alloy Digest ◽  
2008 ◽  
Vol 57 (5) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Aluminum Alloy ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Purity ◽  
Heat Treating ◽  
Data Sheet ◽  
Aircraft Industry ◽  
Kaiser Aluminum ◽  
Strength And Toughness

Abstract Kaiser aluminum alloy 2124 is a high-purity version of 2024 with tighter controls on the iron and silicon for an increase in strength and toughness. It is primarily used as plate in the aircraft industry. This data sheet applies to sheet, coil, and plate in the T851 temper. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: AL-413. Producer or source: Tennalum, A Division of Kaiser Aluminum.

ALCAN 7449 T6511, T79511

Alloy Digest ◽  
2007 ◽  
Vol 56 (5) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Aluminum Alloys ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Strength Properties ◽  
Data Sheet ◽  
Bearing Strength ◽  
Zr Alloy

Abstract Alcan 7449 is an Al-Mg-Zn-Cu-Zr alloy, developed to provide higher-strength properties than incumbent 7175 and 7150 alloys. This data sheet covers the Alcan alloy 7449 in the forms of thick extrusions and extruded bars. Tempers are presented that show improvement over both 7150 and 7175 aluminum alloys. This datasheet provides information on composition, physical properties, elasticity, and tensile properties and bearing strength as well as fatigue. It also includes information on corrosion resistance as well as forming and heat treating. Filing Code: AL-403. Producer or source: Alcan Inc.

CARPENTER STAINLESS TYPE 316LN

Alloy Digest ◽  
2005 ◽  
Vol 54 (3) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Austenitic Stainless Steel ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Data Sheet

Abstract Carpenter Stainless Type 316LN is a common, often used austenitic stainless steel containing molybdenum. This data sheet emphasizes its use as rebar. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-920. Producer or source: Carpenter.

Sign in / Sign up

Export Citation Format

Share Document