ALCAN 2297-T87

Alloy Digest ◽  
2008 ◽  
Vol 57 (7) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Fatigue Strength ◽  
Aluminum Alloys ◽  
Physical Properties ◽  
Tensile Properties ◽  
Damage Tolerance ◽  
Heat Treating ◽  
Equivalent Strength ◽  
Zr Alloy

Abstract Alcan 2297-T87 is an Al-Cu-Li-Mn-Zr alloy, developed to provide improved fatigue and damage tolerance with equivalent strength and corrosion resistance compared with incumbent alloy 2124-T851. The alloy possesses fatigue strength 3 to 5 times that of other aluminum alloys. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as forming and heat treating. Filing Code: AL-415. Producer or source: Alcan Inc.

ALCAN 2027 T3511

Alloy Digest ◽  
2009 ◽  
Vol 58 (8) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Cross Sections ◽  
Damage Tolerance ◽  
Heat Treating ◽  
2024 Alloy ◽  
Zr Alloy

Abstract Alcan 2027 is an Al-Cu-Mg-Mn-Zr alloy, developed to provide higher strength and damage tolerance than the incumbent 2024 alloy. Alcan 2027 T3511 possesses good damage tolerance. This datasheet covers Alcan 2027 T3511 in both thin and the heavier cross sections. This datasheet provides information on composition, physical properties, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as forming and heat treating. Filing Code: AL-424. Producer or source: Alcan Inc.

ALCAN 7449 T6511, T79511

Alloy Digest ◽  
2007 ◽  
Vol 56 (5) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Aluminum Alloys ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Strength Properties ◽  
Data Sheet ◽  
Bearing Strength ◽  
Zr Alloy

Abstract Alcan 7449 is an Al-Mg-Zn-Cu-Zr alloy, developed to provide higher-strength properties than incumbent 7175 and 7150 alloys. This data sheet covers the Alcan alloy 7449 in the forms of thick extrusions and extruded bars. Tempers are presented that show improvement over both 7150 and 7175 aluminum alloys. This datasheet provides information on composition, physical properties, elasticity, and tensile properties and bearing strength as well as fatigue. It also includes information on corrosion resistance as well as forming and heat treating. Filing Code: AL-403. Producer or source: Alcan Inc.

ALCAN 7040-T7651

Alloy Digest ◽  
2008 ◽  
Vol 57 (10) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Aerospace Structures ◽  
Zr Alloy

Abstract Alcan 7040 is an Al-Mg-Zn-Cu-Zr alloy, developed to provide an improved strength-toughness balance versus incumbent 7010 and 7050 alloys. This datasheet covers Alcan 7040 alloy in T7651 temper. The alloy is used in aerospace structures. This datasheet provides information on composition, physical properties, and tensile properties as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as forming and heat treating. Filing Code: AL-418. Producer or source: Alcan Inc.

CDC MANGANESE ALLOY No. 720

Alloy Digest ◽  
1954 ◽  
Vol 3 (1) ◽  
Keyword(s):  
Heat Treatment ◽  
Corrosion Resistance ◽  
Fatigue Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Nickel Alloy ◽  
Heat Treating ◽  
Manganese Alloy ◽  
Copper Manganese ◽  
Development Corporation

Abstract C.D.C. MANGANESE ALLOY No. 720 is a copper-manganese-nickel alloy that responds to hardening by heat treatment. It has high tensile and fatigue strength, wide hardness range, and excellent corrosion resisting characteristics. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-14. Producer or source: Chicago Development Corporation.

ALCOA 6082

Alloy Digest ◽  
2005 ◽  
Vol 54 (6) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Aluminum Alloys ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Heat Treating ◽  
6Xxx Series

Abstract Alloy 6082 is part of the 6xxx series of aluminum alloys. It is similar to 6061, but not quite equivalent in physical properties. It does have higher strength than 6061. The 6082 alloy is used in structural shapes and profiles. This datasheet provides information on composition, physical properties, hardness, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: AL-394. Producer or source: Alcoa Engineered Products.

IncoMAP Alloy Al-9052

Alloy Digest ◽  
1989 ◽  
Vol 38 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Aluminum Alloy ◽  
Aluminum Alloys ◽  
Mechanical Alloying ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Corrosion Resistant

Abstract IncoMAP alloy Al-9052 is a high-strength, corrosion resistant aluminum alloy made by the mechanical alloying process. It is dispersion strengthened by oxides and carbides. Its density is 5% less than age hardenable aluminum alloys of comparable strength. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Al-296. Producer or source: Inco Alloys International Inc..

ATLAS 3003

Alloy Digest ◽  
2021 ◽  
Vol 70 (6) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Aluminum Alloys ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Good Resistance ◽  
Manganese Copper

Abstract Atlas Steels 3003 is a non-heat-treatable, aluminum-manganese-copper alloy. It is one of the most commonly used aluminum alloys. It is selected for applications where good formability, very good resistance to corrosion, or good weldability, or all three, are required, and where more strength is desired than is provided by unalloyed aluminum. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Al-477. Producer or source: Atlas Steels.

CARLSON ALLOY C625

Alloy Digest ◽  
1992 ◽  
Vol 41 (8) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Fatigue Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
General Corrosion ◽  
Cryogenic Temperatures ◽  
Stress Cracking ◽  
Resistance To Oxidation ◽  
Corrosion Pitting

Abstract CARLSON ALLOY C625 has excellent strength and superior resistance to oxidation at temperatures up to 2000 F. Outstanding resistance to general corrosion, pitting, and stress-cracking in many environments. This alloy has exceptional fatigue strength and toughness at cryogenic temperatures. This datasheet provides information on composition, physical properties, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-409. Producer or source: G.O. Carlson Inc..

PROMET 104AB

Alloy Digest ◽  
1968 ◽  
Vol 17 (6) ◽  
Keyword(s):  
Wear Resistance ◽  
Corrosion Resistance ◽  
Fatigue Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Aluminum Bronze ◽  
Good Corrosion Resistance

Abstract PROMET 104AB is a polyphase aluminum bronze, offering a combination of high strength, hardness, wear resistance, fatigue strength and good corrosion resistance. It is recommended for gears, bearing races, worm wheels, slides, etc. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-188. Producer or source: American Crucible Products Company.

AA 6351

Alloy Digest ◽  
1991 ◽  
Vol 40 (9) ◽  
Keyword(s):  
Heat Treatment ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Aluminum Alloys ◽  
Physical Properties ◽  
Tensile Properties ◽  
Precipitation Hardening ◽  
Heat Treating

Abstract AA 6351 wrought alloy contains silicon and magnesium in such amounts that Mg2Si is present as the precipitation hardening constituent with proper heat treatment. The 6000 series alloys are less strong than most of the 2000 and 7000 series aluminum alloys. The formability and corrosion resistance of AA 6351 are good. This datasheet provides information on composition, physical properties, hardness, tensile properties, and shear strength as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Al-319. Producer or source: Various aluminum companies.

Sign in / Sign up

Export Citation Format

Share Document