ALCAN 6056 T4/T78

Alloy Digest ◽  
2010 ◽  
Vol 59 (7) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
2024 Alloy ◽  
Medium Strength ◽  
Weldable Alloy

Abstract Alcan 6056 alloy is an Al-Si-Mg-Zn-Cu-Mn weldable alloy, developed to provide medium strength similar to the incumbent 2024 alloy, with a lower density. This datasheet covers Alcan 6056 in several tempers as fuselage bare sheets. The alloy posesses, in several tempers, a superior combination of weldability, strength, and corrosion resistance. This datasheet provides information on composition, physical properties, microstructure, tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: AL-430. Producer or source: Alcan Inc. and Alcan Aerospace.

ALCAN 6056 T4511/T6511/T78511

Alloy Digest ◽  
2008 ◽  
Vol 57 (12) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
2024 Alloy ◽  
Medium Strength ◽  
Weldable Alloy

Abstract Alcan 6056 alloy is an Al-Si-Mg-Zn-Cu-Mn weldable alloy, developed to provide medium strength similar to the incumbent 2024 alloy, with a lower density. This datasheet covers ALCAN 6056 in several tempers as thin extrusions. The alloy possesses, in several tempers, a superior combination of weldability, high-strength, and corrosion resistance. This datasheet provides information on composition and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as forming and heat treating. Filing Code: AL-419. Producer or source: Alcan Inc.

ALCAN 2027 T3511

Alloy Digest ◽  
2009 ◽  
Vol 58 (8) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Cross Sections ◽  
Damage Tolerance ◽  
Heat Treating ◽  
2024 Alloy ◽  
Zr Alloy

Abstract Alcan 2027 is an Al-Cu-Mg-Mn-Zr alloy, developed to provide higher strength and damage tolerance than the incumbent 2024 alloy. Alcan 2027 T3511 possesses good damage tolerance. This datasheet covers Alcan 2027 T3511 in both thin and the heavier cross sections. This datasheet provides information on composition, physical properties, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as forming and heat treating. Filing Code: AL-424. Producer or source: Alcan Inc.

COPPER ALLOY No. C61000

Alloy Digest ◽  
1983 ◽  
Vol 32 (5) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Aluminum Bronze ◽  
Good Resistance ◽  
Medium Strength ◽  
Cold Worked ◽  
Strength Medium

Abstract Copper Alloy No. C61000 is an aluminum bronze containing nominally 92% copper and 8% aluminum. It is characterized by medium strength, medium ductility and a good capacity for being hot formed or cold worked. It has good resistance to corrosion. Its many uses include shafts, pump parts and bolts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and machining. Filing Code: Cu-458. Producer or source: Copper and copper alloy mills.

AISI 5117

Alloy Digest ◽  
1980 ◽  
Vol 29 (9) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Heat Treating ◽  
Chromium Steel ◽  
Low Carbon ◽  
Steel Mills ◽  
Medium Strength

Abstract AISI 5117 is a low-carbon, low-chromium steel for carburizing and other uses. It is recommended for carburizing applications where it is sufficient to have a low-hardenability core of medium strength and toughness combined with a hard, wear-resistant carburized case. It is used without carburizing in the as-rolled, annealed, normalized or quenched-and-tempered condition. It is suitable for use in the automotive, farm-machinery and many other industries. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-376. Producer or source: Alloy steel mills and foundries.

SAE 8115

Alloy Digest ◽  
1973 ◽  
Vol 22 (8) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Heat Treating ◽  
Low Carbon ◽  
Nickel Chromium ◽  
Steel Mills ◽  
Medium Strength

Abstract SAE 8115 is a low-carbon nickel-chromium-molybdenum carburizing steel recommended for applications where a core of medium strength and toughness combined with a wear-resistant carburized case is sufficient. It has medium hardenability and can be used without carburizing. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-292. Producer or source: Alloy steel mills and foundries.

MUELLER ALLOY 2700

Alloy Digest ◽  
1983 ◽  
Vol 32 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Cold Working ◽  
Heat Treating ◽  
Good Resistance ◽  
Brass Alloy ◽  
Medium Strength ◽  
Copper Zinc ◽  
Cold Worked

Abstract MUELLER Alloy 2700 is a medium-strength copper-zinc (brass) alloy with good ductility. It has good resistance to corrosion and excellent cold-working characteristics. It can be cold worked by the conventional fabrication processes. Its many applications include products made from wire for automotive, electrical, architectural and hardware uses. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-456. Producer or source: Mueller Brass Company.

AMPCOLOY E-5

Alloy Digest ◽  
1977 ◽  
Vol 26 (1) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Iron Alloy ◽  
Heat Treating ◽  
Good Resistance ◽  
Medium Strength ◽  
Aluminum Iron ◽  
Resistance To Wear ◽  
Copper Aluminum

Abstract AMPCOLOY E-5 is a copper-aluminum-iron alloy characterized by medium strength, good hot-working properties and good machinability. Its resistance to corrosion is excellent in many environments. It also has good resistance to wear. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-325. Producer or source: Ampco Metal Inc..

ALCAN B51S

Alloy Digest ◽  
1963 ◽  
Vol 12 (8) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Structural Alloy ◽  
Aluminum Company ◽  
Medium Strength

Abstract Alcan B51S is a medium strength, heat treatable aluminum structural alloy. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Al-128. Producer or source: Aluminum Company of Canada Ltd.

MUELLER ALLOY 2740

Alloy Digest ◽  
1983 ◽  
Vol 32 (12) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Cold Working ◽  
Heat Treating ◽  
Good Resistance ◽  
Brass Alloy ◽  
Medium Strength ◽  
Copper Zinc ◽  
Cold Worked

Abstract MUELLER ALLOY 2740 is a medium-strength copper-zinc (brass) alloy with good ductility and toughness. It has excellent cold-working characteristics and good resistance to corrosion. It can be cold worked by conventional processes and procedures. Mueller Alloy 2740 finds its chief use in plumbing brass goods and trap tube. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-468. Producer or source: Mueller Brass Company.

COPPER ALLOY No. C90900

Alloy Digest ◽  
1985 ◽  
Vol 34 (3) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Good Combination ◽  
Tin Bronze ◽  
Medium Strength ◽  
Strength Alloy

Abstract Copper Alloy No. C90900 is a cast copper-tin alloy which also is known by names formerly used (but not recommended): Tin Bronze, 199 and 87-13-0-0. It is a medium-strength alloy and has a good combination of strength, ductility and resistance to corrosion. Its uses include bearings, bushings, valves, nuts and marine hardware. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-494. Producer or source: Copper alloy foundries.

Sign in / Sign up

Export Citation Format

Share Document