AISI 1025

Alloy Digest ◽  
1972 ◽  
Vol 21 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Carbon Steel ◽  
Physical Properties ◽  
Heat Treating ◽  
General Purpose ◽  
Medium Carbon Steel ◽  
Medium Carbon ◽  
Steel Mills ◽  
Cold Worked

Abstract AISI 1025 is a low-to-medium-carbon steel used in the hot-worked, cold-worked, normalized or water-quenched-and-tempered condition for general-purpose construction and engineering. It is also used for case-hardened components. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-47. Producer or source: Carbon and alloy steel mills.

AISI 1040

Alloy Digest ◽  
1971 ◽  
Vol 20 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Low Cost ◽  
Heat Treating ◽  
General Purpose ◽  
Medium Carbon Steel ◽  
Medium Carbon ◽  
Steel Mills ◽  
Medium Strength ◽  
Hot Rolled

Abstract AISI 1040 is a medium-carbon steel used in the hot-rolled, normalized, oil quenched and tempered or water quenched and tempered condition for general purpose engineering and construction. It provides medium strength and toughness at low cost. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-41. Producer or source: Carbon and alloy steel mills.

SAE 1037

Alloy Digest ◽  
1979 ◽  
Vol 28 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Carbon Steel ◽  
Low Cost ◽  
Heat Treating ◽  
General Purpose ◽  
Medium Carbon Steel ◽  
Medium Carbon ◽  
Steel Mills ◽  
Medium Strength ◽  
Hot Rolled

Abstract SAE 1037 is a carbon steel that provides medium strength and medium toughness at low cost. It is used in the hot-rolled, normalized, oil-quenched-and-tempered and water-quenched-and-tempered conditions. This medium-carbon steel is used for construction and for general-purpose engineering. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-76. Producer or source: Carbon steel mills.

SAE 1026

Alloy Digest ◽  
1976 ◽  
Vol 25 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Carbon Steel ◽  
Heat Treating ◽  
Medium Carbon Steel ◽  
High Manganese ◽  
Medium Carbon ◽  
The Core ◽  
Steel Mills ◽  
Cold Worked ◽  
Good Workability

Abstract SAE 1026 is a low-to-medium-carbon steel used in the annealed, hot-worked, normalized, cold-worked or water-quenched-and-tempered condition for a variety of engineering and construction applications. It combines good workability (hot or cold), good machinability and good weldability. It has relatively high manganese (0.60-0.90%); this provides increased hardenability which is reflected in all uses and gives somewhat increased hardness and strength in the core of carburized parts and in uncarburized applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-60. Producer or source: Carbon steel mills.

AISI 4140

Alloy Digest ◽  
1988 ◽  
Vol 37 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Carbon Steel ◽  
Physical Properties ◽  
Temper Embrittlement ◽  
Heat Treating ◽  
Medium Carbon Steel ◽  
Heavy Duty ◽  
Medium Carbon ◽  
Steel Mills ◽  
Aisi 4140

Abstract AISI 4140 is a through-hardening chromium-molybdenum medium carbon steel. It is not subject to temper embrittlement. It is recommended for heavy duty service. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: SA-18. Producer or source: Alloy steel mills and foundries. Originally published May 1954, revised September 1988.

UNS G10260

Alloy Digest ◽  
1988 ◽  
Vol 37 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
Carbon Steel ◽  
Heat Treating ◽  
Medium Carbon Steel ◽  
High Manganese ◽  
Medium Carbon ◽  
The Core ◽  
Steel Mills ◽  
Cold Worked ◽  
Good Workability

Abstract UNS G10260 is a low-to-medium-carbon steel used in the annealed, hot-worked, normalized, cold-worked or water-quenched-and-tempered condition for a variety of engineering and construction applications. It combines good workability (hot or cold), good machinability and good weldability. It has relatively high manganese (0.60-0.90%); this provides increased hardenability which is reflected in all uses and gives somewhat increased hardness and strength in the core of carburized parts and in uncarburized applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: CS-123. Producer or source: Carbon steel mills.

SAE 1040

Alloy Digest ◽  
1988 ◽  
Vol 37 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Carbon Steel ◽  
Low Cost ◽  
Heat Treating ◽  
General Purpose ◽  
Medium Carbon Steel ◽  
Medium Carbon ◽  
Steel Mills ◽  
Medium Strength ◽  
Hot Rolled

Abstract SAE 1040 is a medium-carbon steel used in the hot-rolled, normalized, oil quenched and tempered or water quenched and tempered condition for general purpose engineering and construction. It provides medium strength and toughness at low cost. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-120. Producer or source: Carbon steel mills.

UNILOY 14 HV

Alloy Digest ◽  
1969 ◽  
Vol 18 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Carbon Steel ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Medium Carbon Steel ◽  
Medium Carbon ◽  
Structural Parts

Abstract UNILOY-14HV is a low-alloy, medium carbon steel recommended for high temperature applications for bolting and structural parts at temperatures up to 1000 F. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-241. Producer or source: Cyclops Corporation.

AISI 1020

Alloy Digest ◽  
1971 ◽  
Vol 20 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Carbon Steel ◽  
Physical Properties ◽  
Low Carbon Steel ◽  
Heat Treating ◽  
Low Carbon ◽  
Steel Mills ◽  
Wide Range ◽  
Cold Worked

Abstract AISI 1020 is a low carbon steel combining good machinability, workability, and weldability. It is used for case-hardened components and for a wide range of applications in the hot-worked, cold-worked, normalized or quenched-and-tempered conditions. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: CS-39. Producer or source: Carbon and alloy steel mills.

AISI 1029

Alloy Digest ◽  
1981 ◽  
Vol 30 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Heat Treating ◽  
Medium Carbon Steel ◽  
High Manganese ◽  
Medium Carbon ◽  
The Core ◽  
Steel Mills ◽  
Cold Worked ◽  
Good Workability

Abstract AISI 1029 is a low-to-medium-carbon steel used in the annealed, hot-worked, normalized, cold-worked or water-quenched-and-tempered condition for a variety of engineering and construction applications. It combines good workability (hot or cold), good machinability and good weldability. Its relatively high manganese (0.60-0.90%) provides increased hardenability which is reflected in all uses and gives somewhat increased hardness and strength in the core of carburized parts and in uncarburized applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-86. Producer or source: Carbon and alloy steel mills.

SAE 1019

Alloy Digest ◽  
1978 ◽  
Vol 27 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Carbon Steel ◽  
Physical Properties ◽  
Surface Treatment ◽  
Heat Treating ◽  
Metal Working ◽  
Steel Mills ◽  
Cold Worked ◽  
Cold Workability

Abstract SAE 1019 is a carbon steel that combines good machinability, good hot and cold-workability, and good welding characteristics. It is used in the annealed, hot-worked, normalized, cold-worked or water-quenched-and-tempered condition for many automotive and metal-working applications. It may be used in the carburized condition or without carburizing. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-72. Producer or source: Carbon steel mills.

Sign in / Sign up

Export Citation Format

Share Document