AISI 1020

Alloy Digest ◽  
1971 ◽  
Vol 20 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Carbon Steel ◽  
Physical Properties ◽  
Low Carbon Steel ◽  
Heat Treating ◽  
Low Carbon ◽  
Steel Mills ◽  
Wide Range ◽  
Cold Worked

Abstract AISI 1020 is a low carbon steel combining good machinability, workability, and weldability. It is used for case-hardened components and for a wide range of applications in the hot-worked, cold-worked, normalized or quenched-and-tempered conditions. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: CS-39. Producer or source: Carbon and alloy steel mills.

SAE 1020

Alloy Digest ◽  
1987 ◽  
Vol 36 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Carbon Steel ◽  
Low Carbon Steel ◽  
Heat Treating ◽  
Low Carbon ◽  
Steel Mills ◽  
Temperature Performance ◽  
Wide Range ◽  
Cold Worked

Abstract SAE 1020 is a low-carbon steel combining good machinability, workability and weldability. It is carburized for use in case-hardened components and it is used for a wide range of applications in the hot-worked, cold-worked, normalized or quenched-and-tempered conditions. Its many uses include bolts, rods, plate applications, machinery components, case-hardened parts, spinning tools and trimming dies. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on low temperature performance and corrosion resistance as well as heat treating, machining, joining, and surface treatment. Filing Code: CS-113. Producer or source: Carbon steel mills.

AISI 1015

Alloy Digest ◽  
1972 ◽  
Vol 21 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Carbon Steel ◽  
Low Carbon Steel ◽  
Heat Treating ◽  
General Purpose ◽  
Low Carbon ◽  
Steel Mills ◽  
Cold Worked ◽  
Hot Rolled ◽  
Good Workability

Abstract AISI 1015 is a low-carbon steel used in the annealed, cold-worked, hot-rolled or normalized condition for general purpose construction and engineering. It is also used for case-hardened components. It combines good machinability, good workability and good weldability. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-48. Producer or source: Carbon steel mills.

AISI 1025

Alloy Digest ◽  
1972 ◽  
Vol 21 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Carbon Steel ◽  
Physical Properties ◽  
Heat Treating ◽  
General Purpose ◽  
Medium Carbon Steel ◽  
Medium Carbon ◽  
Steel Mills ◽  
Cold Worked

Abstract AISI 1025 is a low-to-medium-carbon steel used in the hot-worked, cold-worked, normalized or water-quenched-and-tempered condition for general-purpose construction and engineering. It is also used for case-hardened components. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-47. Producer or source: Carbon and alloy steel mills.

SAE 1015

Alloy Digest ◽  
1988 ◽  
Vol 37 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Carbon Steel ◽  
Low Carbon Steel ◽  
Heat Treating ◽  
General Purpose ◽  
Low Carbon ◽  
Steel Mills ◽  
Cold Worked ◽  
Hot Rolled ◽  
Good Workability

Abstract SAE 1015 is a low-carbon steel used in the annealed, cold-worked, hot-rolled or normalized condition for general purpose construction and engineering. It is also used for case-hardened components. It combines good machinability, good workability and good weldability. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-119. Producer or source: Carbon steel mills.

AISI 1117

Alloy Digest ◽  
1983 ◽  
Vol 32 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Carbon Steel ◽  
Physical Properties ◽  
Surface Treatment ◽  
Manganese Content ◽  
Heat Treating ◽  
The Core ◽  
Steel Mills ◽  
Wide Range

Abstract AISI 1117 is a resulfurized carbon steel for use where a free-machining carburizing steel is required. Its manganese content (nominally 1.15%) provides some increase in hardenability in all applications and increased hardness and strength in uncarburized uses and in the core of carburized parts. Its applications include a wide range of components of components and parts for machinery and structures. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-96. Producer or source: Carbon steel mills.

SAE 1019

Alloy Digest ◽  
1978 ◽  
Vol 27 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Carbon Steel ◽  
Physical Properties ◽  
Surface Treatment ◽  
Heat Treating ◽  
Metal Working ◽  
Steel Mills ◽  
Cold Worked ◽  
Cold Workability

Abstract SAE 1019 is a carbon steel that combines good machinability, good hot and cold-workability, and good welding characteristics. It is used in the annealed, hot-worked, normalized, cold-worked or water-quenched-and-tempered condition for many automotive and metal-working applications. It may be used in the carburized condition or without carburizing. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-72. Producer or source: Carbon steel mills.

AISI 1010

Alloy Digest ◽  
1985 ◽  
Vol 34 (5) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Carbon Steel ◽  
Low Temperature ◽  
Physical Properties ◽  
Deep Drawing ◽  
Low Carbon Steel ◽  
Heat Treating ◽  
Low Carbon ◽  
Steel Mills ◽  
Temperature Performance

Abstract AISI 1010 is a low-carbon steel having good formability and weldability. It is recommended for sheet stock for deep-drawing operations and in sheet and stock for structural shapes and carburized parts. Among its many applications are bushings, clutch discs, flanges, thrust washers, tinplate, nails, rivets, automobile bodies and fenders, pans and transmission covers. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on low temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: CS-106. Producer or source: Carbon steel mills.

B&W IRON

Alloy Digest ◽  
1968 ◽  
Vol 17 (8) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Carbon Steel ◽  
Physical Properties ◽  
Magnetic Permeability ◽  
Electric Motor ◽  
Low Carbon Steel ◽  
Heat Treating ◽  
Magnetic Characteristics ◽  
Low Carbon ◽  
High Magnetic Permeability

Abstract B and W IRON is a thoroughly killed, low carbon steel having a combination of ductility, toughness and high magnetic permeability. It is recommended for applications where good magnetic characteristics are of primary significance, such as in the manufacture of electric motor and generator housings. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Fe-35. Producer or source: Babcock & Wilcox Company.

USS 1/2% Cr-1/2% Mo

Alloy Digest ◽  
1969 ◽  
Vol 18 (10) ◽  
Keyword(s):  
United States ◽  
Fracture Toughness ◽  
High Temperature ◽  
Carbon Steel ◽  
Physical Properties ◽  
Low Carbon Steel ◽  
Heat Treating ◽  
Low Carbon ◽  
United States Steel Corporation ◽  
Temperature Performance

Abstract USS 1/2% Cr-1/2% Mo is a low-alloy low-carbon steel recommended for use in steam service to reduce susceptibility to graphitization up to 950 F. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: SA-245. Producer or source: United States Steel Corporation.

SAE 1050

Alloy Digest ◽  
1986 ◽  
Vol 35 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Carbon Steel ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Induction Hardening ◽  
Heat Treating ◽  
Steel Mills ◽  
Strength And Toughness

Abstract SAE 1050 is a water- and oil-hardening grade of carbon steel recommended for applications where a shallow-hardening steel of moderate strength and toughness suffices. It is commonly used for parts where induction hardening is employed and may be used in the austempered condition. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as heat treating, machining, joining, and surface treatment. Filing Code: CS-110. Producer or source: Carbon steel mills.

Sign in / Sign up

Export Citation Format

Share Document