AISI 1018

Alloy Digest ◽  
1975 ◽  
Vol 24 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Carbon Steel ◽  
Manganese Content ◽  
Heat Treating ◽  
High Manganese ◽  
The Core ◽  
Steel Mills ◽  
Good Workability ◽  
High Manganese Content

Abstract AISI 1018 is a carbon steel with a relatively high manganese content (0.60-0.90%) which provides increased hardenability in all applications and increased hardness and strength in the core of carburized parts and in uncarburized uses. AISI 1018 combines good machinability, good workability and good weldability. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-56. Producer or source: Carbon steel mills.

AISI 1118

Alloy Digest ◽  
1974 ◽  
Vol 23 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Carbon Steel ◽  
Physical Properties ◽  
Manganese Content ◽  
Heat Treating ◽  
High Manganese ◽  
The Core ◽  
Steel Mills ◽  
High Manganese Content

Abstract AISI 1118 is a resulfurized carbon steel for applications requiring a free-machining carburizing steel. Its relatively high manganese content provides increased hardenability in all applications and increased hardness and strength in uncarburized uses and in the core of carburized components. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-55. Producer or source: Carbon steel mills. See also Alloy Digest CS-91, December 1982.

UNS G10210

Alloy Digest ◽  
1988 ◽  
Vol 37 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Carbon Steel ◽  
Manganese Content ◽  
Heat Treating ◽  
Carbon Steels ◽  
High Manganese ◽  
Steel Mills ◽  
Cold Worked ◽  
Good Workability ◽  
High Manganese Content

Abstract UNS G10210 is a carbon steel of relatively high manganese content which increases hardenability and hardness over that of carbon steels of lower manganese. It combines good machinability, good workability (hot or cold) and good weldability. It is used in the annealed, hot-worked, normalized, cold-worked or water-quenched-and-tempered condition for many applications. It may be used in uncarburized applications and for components case-hardened by carburizing. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-122. Producer or source: Carbon steel mills.

SAE 1021

Alloy Digest ◽  
1976 ◽  
Vol 25 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
Carbon Steel ◽  
Manganese Content ◽  
Heat Treating ◽  
Carbon Steels ◽  
High Manganese ◽  
Steel Mills ◽  
Cold Worked ◽  
Good Workability ◽  
High Manganese Content

Abstract SAE 1021 is a carbon steel of relatively high manganese content which increases hardenability and hardness over that of carbon steels of lower manganese. It combines good machinability, good workability (hot or cold) and good weldability. It is used in the annealed, hot-worked, normalized, cold-worked or water-quenched-and-tempered condition for many applications. It may be used in uncarburized applications and for components case-hardened by carburizing. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-64. Producer or source: Carbon steel mills.

AISI 1022

Alloy Digest ◽  
1974 ◽  
Vol 23 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Carbon Steel ◽  
Physical Properties ◽  
Surface Treatment ◽  
Manganese Content ◽  
Heat Treating ◽  
High Manganese ◽  
The Core ◽  
Steel Mills ◽  
High Manganese Content

Abstract AISI 1022 is a carbon steel of relatively high manganese content which provides increased hardenability in all applications and increased hardness and strength in uncarburized uses and in the core of carburized components. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-54. Producer or source: Carbon steel mills.

SAE 1026

Alloy Digest ◽  
1976 ◽  
Vol 25 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Carbon Steel ◽  
Heat Treating ◽  
Medium Carbon Steel ◽  
High Manganese ◽  
Medium Carbon ◽  
The Core ◽  
Steel Mills ◽  
Cold Worked ◽  
Good Workability

Abstract SAE 1026 is a low-to-medium-carbon steel used in the annealed, hot-worked, normalized, cold-worked or water-quenched-and-tempered condition for a variety of engineering and construction applications. It combines good workability (hot or cold), good machinability and good weldability. It has relatively high manganese (0.60-0.90%); this provides increased hardenability which is reflected in all uses and gives somewhat increased hardness and strength in the core of carburized parts and in uncarburized applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-60. Producer or source: Carbon steel mills.

UNS G10260

Alloy Digest ◽  
1988 ◽  
Vol 37 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
Carbon Steel ◽  
Heat Treating ◽  
Medium Carbon Steel ◽  
High Manganese ◽  
Medium Carbon ◽  
The Core ◽  
Steel Mills ◽  
Cold Worked ◽  
Good Workability

Abstract UNS G10260 is a low-to-medium-carbon steel used in the annealed, hot-worked, normalized, cold-worked or water-quenched-and-tempered condition for a variety of engineering and construction applications. It combines good workability (hot or cold), good machinability and good weldability. It has relatively high manganese (0.60-0.90%); this provides increased hardenability which is reflected in all uses and gives somewhat increased hardness and strength in the core of carburized parts and in uncarburized applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: CS-123. Producer or source: Carbon steel mills.

AISI 1117

Alloy Digest ◽  
1983 ◽  
Vol 32 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Carbon Steel ◽  
Physical Properties ◽  
Surface Treatment ◽  
Manganese Content ◽  
Heat Treating ◽  
The Core ◽  
Steel Mills ◽  
Wide Range

Abstract AISI 1117 is a resulfurized carbon steel for use where a free-machining carburizing steel is required. Its manganese content (nominally 1.15%) provides some increase in hardenability in all applications and increased hardness and strength in uncarburized uses and in the core of carburized parts. Its applications include a wide range of components of components and parts for machinery and structures. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-96. Producer or source: Carbon steel mills.

AISI 1029

Alloy Digest ◽  
1981 ◽  
Vol 30 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Heat Treating ◽  
Medium Carbon Steel ◽  
High Manganese ◽  
Medium Carbon ◽  
The Core ◽  
Steel Mills ◽  
Cold Worked ◽  
Good Workability

Abstract AISI 1029 is a low-to-medium-carbon steel used in the annealed, hot-worked, normalized, cold-worked or water-quenched-and-tempered condition for a variety of engineering and construction applications. It combines good workability (hot or cold), good machinability and good weldability. Its relatively high manganese (0.60-0.90%) provides increased hardenability which is reflected in all uses and gives somewhat increased hardness and strength in the core of carburized parts and in uncarburized applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-86. Producer or source: Carbon and alloy steel mills.

SAE 1023

Alloy Digest ◽  
1979 ◽  
Vol 28 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Carbon Steel ◽  
Physical Properties ◽  
Surface Treatment ◽  
Manganese Content ◽  
Heat Treating ◽  
Steel Mills ◽  
Industry Applications ◽  
Good Workability

Abstract SAE 1023 is a carbon steel of relatively low manganese content (0.30-0.60%); therefore, its hardenability, hardness and strength are somewhat lower than that of steels of higher manganese content at comparable carbon levels. It has good machinability, good workability (hot or cold) and good weldability. It is used in the annealed, hot worked, normalized or water-quenched-and-tempered condition for many automotive and general industry applications. It may be used in the carburized condition or without carburizing. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-78. Producer or source: Carbon steel mills.

AISI 1541

Alloy Digest ◽  
1978 ◽  
Vol 27 (9) ◽  
Keyword(s):  
Carbon Steel ◽  
Manganese Content ◽  
Heat Treating ◽  
Medium Carbon Steel ◽  
High Manganese ◽  
Steel Mills ◽  
Cold Worked ◽  
Increased Strength ◽  
Hot Rolled ◽  
Good Workability

Abstract AISI 1541 is a medium-carbon steel containing relatively high manganese (1.35-1.65%). It is characterized by a combination of good machinability and good workability. It may be used in the hot-rolled, annealed, normalized, cold-worked or liquid-quenched-and-tempered condition for numerous applications. Its high manganese content provides increased hardenability which is reflected in increased strength. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-75. Producer or source: Carbon steel mills.

Sign in / Sign up

Export Citation Format

Share Document