AISI 1117

Alloy Digest ◽  
1983 ◽  
Vol 32 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Carbon Steel ◽  
Physical Properties ◽  
Surface Treatment ◽  
Manganese Content ◽  
Heat Treating ◽  
The Core ◽  
Steel Mills ◽  
Wide Range

Abstract AISI 1117 is a resulfurized carbon steel for use where a free-machining carburizing steel is required. Its manganese content (nominally 1.15%) provides some increase in hardenability in all applications and increased hardness and strength in uncarburized uses and in the core of carburized parts. Its applications include a wide range of components of components and parts for machinery and structures. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-96. Producer or source: Carbon steel mills.

AISI 1017

Alloy Digest ◽  
1986 ◽  
Vol 35 (1) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Carbon Steel ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Manganese Content ◽  
Heat Treating ◽  
The Core ◽  
Steel Mills ◽  
Cold Workability

Abstract AISI 1017 is a carbon steel with a relatively low manganese content (0.30-0.60%); this contributes to relatively low hardenability in all applications and increased ductility with decreased hardness and strength in the core of carburized material and in uncarburized uses. It combines good hot and cold workability, good machinability and good weldability. Typical applications are carburized parts, bolts, trusses and cold-extruded parts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-109. Producer or source: Carbon steel mills.

SAE 1023

Alloy Digest ◽  
1979 ◽  
Vol 28 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Carbon Steel ◽  
Physical Properties ◽  
Surface Treatment ◽  
Manganese Content ◽  
Heat Treating ◽  
Steel Mills ◽  
Industry Applications ◽  
Good Workability

Abstract SAE 1023 is a carbon steel of relatively low manganese content (0.30-0.60%); therefore, its hardenability, hardness and strength are somewhat lower than that of steels of higher manganese content at comparable carbon levels. It has good machinability, good workability (hot or cold) and good weldability. It is used in the annealed, hot worked, normalized or water-quenched-and-tempered condition for many automotive and general industry applications. It may be used in the carburized condition or without carburizing. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-78. Producer or source: Carbon steel mills.

AISI 1118

Alloy Digest ◽  
1974 ◽  
Vol 23 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Carbon Steel ◽  
Physical Properties ◽  
Manganese Content ◽  
Heat Treating ◽  
High Manganese ◽  
The Core ◽  
Steel Mills ◽  
High Manganese Content

Abstract AISI 1118 is a resulfurized carbon steel for applications requiring a free-machining carburizing steel. Its relatively high manganese content provides increased hardenability in all applications and increased hardness and strength in uncarburized uses and in the core of carburized components. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-55. Producer or source: Carbon steel mills. See also Alloy Digest CS-91, December 1982.

AISI 1022

Alloy Digest ◽  
1974 ◽  
Vol 23 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Carbon Steel ◽  
Physical Properties ◽  
Surface Treatment ◽  
Manganese Content ◽  
Heat Treating ◽  
High Manganese ◽  
The Core ◽  
Steel Mills ◽  
High Manganese Content

Abstract AISI 1022 is a carbon steel of relatively high manganese content which provides increased hardenability in all applications and increased hardness and strength in uncarburized uses and in the core of carburized components. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-54. Producer or source: Carbon steel mills.

SAE 1017

Alloy Digest ◽  
1980 ◽  
Vol 29 (10) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Carbon Steel ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Manganese Content ◽  
Heat Treating ◽  
The Core ◽  
Steel Mills ◽  
Cold Workability

Abstract SAE 1017 is a carbon steel with a relatively low manganese content (0.30-0.60%) which contributes to relatively low hardenability in all applications and increased ductility with decreased hardness and strength in the core of carburized material and in uncarburized uses. It combines good hot and cold workability, good machinability and good weldability. Typical applications are carburized parts, bolts, trusses and cold-extruded parts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-84. Producer or source: Carbon steel mills.

AISI 1018

Alloy Digest ◽  
1975 ◽  
Vol 24 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Carbon Steel ◽  
Manganese Content ◽  
Heat Treating ◽  
High Manganese ◽  
The Core ◽  
Steel Mills ◽  
Good Workability ◽  
High Manganese Content

Abstract AISI 1018 is a carbon steel with a relatively high manganese content (0.60-0.90%) which provides increased hardenability in all applications and increased hardness and strength in the core of carburized parts and in uncarburized uses. AISI 1018 combines good machinability, good workability and good weldability. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-56. Producer or source: Carbon steel mills.

SAE 1050

Alloy Digest ◽  
1986 ◽  
Vol 35 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Carbon Steel ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Induction Hardening ◽  
Heat Treating ◽  
Steel Mills ◽  
Strength And Toughness

Abstract SAE 1050 is a water- and oil-hardening grade of carbon steel recommended for applications where a shallow-hardening steel of moderate strength and toughness suffices. It is commonly used for parts where induction hardening is employed and may be used in the austempered condition. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as heat treating, machining, joining, and surface treatment. Filing Code: CS-110. Producer or source: Carbon steel mills.

AISI 1020

Alloy Digest ◽  
1971 ◽  
Vol 20 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Carbon Steel ◽  
Physical Properties ◽  
Low Carbon Steel ◽  
Heat Treating ◽  
Low Carbon ◽  
Steel Mills ◽  
Wide Range ◽  
Cold Worked

Abstract AISI 1020 is a low carbon steel combining good machinability, workability, and weldability. It is used for case-hardened components and for a wide range of applications in the hot-worked, cold-worked, normalized or quenched-and-tempered conditions. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: CS-39. Producer or source: Carbon and alloy steel mills.

AISI 1050

Alloy Digest ◽  
1970 ◽  
Vol 19 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Carbon Steel ◽  
Physical Properties ◽  
Surface Treatment ◽  
Induction Hardening ◽  
Heat Treating ◽  
Steel Mills ◽  
Temperature Performance

Abstract AISI 1050 is a water- and oil-hardening grade of carbon steel recommended for applications where a shallow-hardening steel of moderate strength and toughness suffices. It is commonly used for parts where induction hardening is employed and may be used in the austempered condition. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-37. Producer or source: Carbon and alloy steel mills.

SAE 1019

Alloy Digest ◽  
1978 ◽  
Vol 27 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Carbon Steel ◽  
Physical Properties ◽  
Surface Treatment ◽  
Heat Treating ◽  
Metal Working ◽  
Steel Mills ◽  
Cold Worked ◽  
Cold Workability

Abstract SAE 1019 is a carbon steel that combines good machinability, good hot and cold-workability, and good welding characteristics. It is used in the annealed, hot-worked, normalized, cold-worked or water-quenched-and-tempered condition for many automotive and metal-working applications. It may be used in the carburized condition or without carburizing. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-72. Producer or source: Carbon steel mills.

Sign in / Sign up

Export Citation Format

Share Document