CMW 100

Alloy Digest ◽  
2000 ◽  
Vol 49 (10) ◽  
Keyword(s):  
Thermal Conductivity ◽  
Heat Treatment ◽  
Copper Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Age Hardening ◽  
High Tensile Strength ◽  
Electrical Components ◽  
Flash Welding ◽  
Hardening Heat Treatment

Abstract CMW 100 is a copper alloy that combines high tensile strength with high electrical and thermal conductivity. It responds to age-hardening heat treatment. It is used for flash welding dies, springs, electrical components, high-strength backing material for brazed assemblies, and wire guides. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CU-29. Producer or source: CMW Inc. Originally published as Mallory 100, August 1955, revised October 2000.

COPPER ALLOY No. 190

Alloy Digest ◽  
1969 ◽  
Vol 18 (9) ◽  
Keyword(s):  
Thermal Conductivity ◽  
Heat Treatment ◽  
Electrical Conductivity ◽  
Copper Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Age Hardening ◽  
High Electrical Conductivity ◽  
Endurance Strength ◽  
Hardening Heat Treatment

Abstract Copper alloy No. 190 is an intermediate strength phosphor bronze having a combination of high electrical conductivity and endurance strength. It responds to an age hardening heat treatment offering an endurance strength of 39000 psi. It is recommended for springs, conductors, fasteners, etc. where a combination of high strength, high electrical and thermal conductivity, high resistance to fatigue and creep are required. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep and fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-206. Producer or source: Copper and copper alloy mills.

PHOSNIC BRONZE

Alloy Digest ◽  
1965 ◽  
Vol 14 (2) ◽  
Keyword(s):  
Heat Treatment ◽  
Corrosion Resistance ◽  
Copper Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Age Hardening ◽  
Excellent Corrosion Resistance ◽  
Endurance Strength ◽  
Prolonged Stress ◽  
Hardening Heat Treatment

Abstract CHASE PHOSNIC BRONZE is a high copper alloy combining high strength and high conductivity, both electrical and thermal, in an unusual degree. It has high workability and excellent corrosion resistance. The additions of nickel and phosphorus to the copper render the alloy capable of being hardened and strengthened by age-hardening heat treatment. The alloy has also high endurance strength in the harder drawn tempers of wire, and excellent resistance to creep or flow under the influence of prolonged stress. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep and fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-12. Producer or source: Chase Brass & Copper Company Inc.. Originally published November 1953, revised February 1965.

BRUSH ALLOY M220C

Alloy Digest ◽  
1966 ◽  
Vol 15 (7) ◽  
Keyword(s):  
Thermal Conductivity ◽  
Heat Treatment ◽  
Wear Resistance ◽  
Corrosion Resistance ◽  
High Strength ◽  
Heat Treating ◽  
Age Hardening ◽  
Casting Alloy ◽  
Temperature Performance ◽  
Hardening Heat Treatment

Abstract Brush Alloy M220C is a betyllium-nickel casting alloy that responds to an age-hardening heat treatment and is characterized by high strength thermal conductivity combined with excellent corrosion, oxidation and wear resistance. It is recommended for mold tooling in the glass industries. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, joining, and surface treatment. Filing Code: Ni-114. Producer or source: Brush Beryllium Company.

CONDULOY

Alloy Digest ◽  
1953 ◽  
Vol 2 (10) ◽  
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Age Hardening ◽  
Beryllium Copper ◽  
Hardening Heat Treatment

Abstract CONDULOY is a low beryllium-copper alloy containing about 1.5% nickel. It responds to age-hardening heat treatment for improved mechanical properties. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on casting, heat treating, machining, and joining. Filing Code: Cu-11. Producer or source: Brush Beryllium Company.

BRUSH ALLOY M25

Alloy Digest ◽  
1970 ◽  
Vol 19 (6) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Age Hardening ◽  
Beryllium Copper ◽  
Screw Machine ◽  
Electrical Components

Abstract BRUSH alloy M25 is a free-machining beryllium-copper alloy having good response to age-hardening for high strength, hardness, fatigue and corrosion resistance. It is recommended for screw machine products, gears, shafts, hardware, fasteners, connectors, electronic and electrical components. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-217. Producer or source: Brush Beryllium Company.

CONFLEX 720

Alloy Digest ◽  
1964 ◽  
Vol 13 (7) ◽  
Keyword(s):  
Heat Treatment ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Nickel Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Age Hardening ◽  
Copper Manganese ◽  
Hardening Heat Treatment

Abstract CONFLEX 720 is a copper-manganese-nickel alloy that responds to an age-hardening heat treatment for high strength and corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as heat treating, machining, joining, and surface treatment. Filing Code: Cu-143. Producer or source: Metals & Controls Inc..

ALUMINUM A356

Alloy Digest ◽  
1969 ◽  
Vol 18 (11) ◽  
Keyword(s):  
Heat Treatment ◽  
Corrosion Resistance ◽  
High Strength ◽  
Heat Treating ◽  
Age Hardening ◽  
Casting Alloy ◽  
Permanent Mold ◽  
Aluminum Company ◽  
Mold Casting ◽  
Hardening Heat Treatment

Abstract Aluminum A356 is a sand and permanent mold casting alloy that responds to an age-hardening heat treatment. It is recommended for aircraft and missile components where high strength and corrosion resistance are required. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fatigue. It also includes information on heat treating, machining, and joining. Filing Code: Al-192. Producer or source: Aluminum Company of America.

BRUSH ALLOY 10

Alloy Digest ◽  
1968 ◽  
Vol 17 (5) ◽  
Keyword(s):  
Heat Treatment ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Age Hardening ◽  
Resistance Welding Electrodes ◽  
Hardening Heat Treatment

Abstract BRUSH Alloy 10 is a low beryllium, cobalt-bearing copper alloy offering an excellent combination of strength, toughness and conductivity due to an age-hardening heat treatment. It is recommended for springs, clutch rings, resistance welding electrodes and tips, etc. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as casting, forming, heat treating, machining, joining, and surface treatment. Filing Code: Cu-187. Producer or source: Brush Beryllium Company.

ALLVAC 718

Alloy Digest ◽  
1964 ◽  
Vol 13 (4) ◽  
Keyword(s):  
Heat Treatment ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Iron Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Age Hardening ◽  
Nickel Chromium ◽  
Temperature Performance ◽  
Hardening Heat Treatment

Abstract Allvac 718 is a nickel-chromium-iron alloy that responds to an age-hardening heat treatment. It is recommended for parts requiring high strength and oxidation resistance up to about 1300 F and particularly for such parts that require welding. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-90. Producer or source: Allvac Inc..

ALUMINUM 336.0

Alloy Digest ◽  
1986 ◽  
Vol 35 (3) ◽  
Keyword(s):  
Heat Treatment ◽  
Base Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Age Hardening ◽  
Permanent Mold ◽  
Temperature Performance ◽  
Permanent Mold Castings ◽  
Aluminum Base ◽  
Hardening Heat Treatment

Abstract ALUMINUM 336.0 is a high-silicon aluminum-base alloy recommended for high-strength permanent-mold castings. It responds to an age-hardening heat treatment. Its applications include automotive and diesel pistons, pulleys and sheaves. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as creep and fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-266. Producer or source: Various aluminum companies.

Sign in / Sign up

Export Citation Format

Share Document