INCRAMET 800

Alloy Digest ◽  
1967 ◽  
Vol 16 (1) ◽  
Keyword(s):  
High Temperature ◽  
Elevated Temperatures ◽  
Base Alloy ◽  
Heat Treating ◽  
Glass Container ◽  
Research Association ◽  
Corrosion Resistant ◽  
Copper Base ◽  
Temperature Performance ◽  
Copper Base Alloy

Abstract Incramet 800 is a copper-base alloy exhibiting an excellent combination of mechanical, physical and corrosion resistant properties at both room and elevated temperatures. It is recommended for glass container molds and sheet glass rolls. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on high temperature performance as well as casting, forming, heat treating, machining, and joining. Filing Code: Cu-173. Producer or source: Licensees of the International Copper Research Association.

ANACONDA ALLOY 182

Alloy Digest ◽  
1982 ◽  
Vol 31 (6) ◽  
Keyword(s):  
Electrical Conductivity ◽  
Elevated Temperatures ◽  
Base Alloy ◽  
Heat Treating ◽  
High Electrical Conductivity ◽  
Electronic Components ◽  
Copper Base ◽  
Temperature Performance ◽  
Resistance Welding Electrodes ◽  
Copper Base Alloy

Abstract ANACONDA Alloy 182 is a copper-base alloy containing nominally 0.85% chromium. It offers relatively high electrical conductivity, good strength and hardness and some resistance to softening at elevated temperatures. Among its uses are resistance welding electrodes, switchgear, and electrical and electronic components. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-438. Producer or source: Anaconda American Brass Company.

WAUKESHA ALLOY 88

Alloy Digest ◽  
1993 ◽  
Vol 42 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
High Temperature ◽  
Physical Properties ◽  
Base Alloy ◽  
Heat Treating ◽  
Nickel Base Alloy ◽  
Corrosion Resistant ◽  
Temperature Performance ◽  
Nickel Base

Abstract WAUKESHA METAL NO. 88 is a corrosion resistant nickel-base alloy compounded to run against stainless steel without galling or seizing. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance as well as casting, heat treating, machining, and joining. Filing Code: Ni-84. Producer or source: Waukesha Foundry Company. Originally published July 1963, revised February 1993.

UDIMET 105

Alloy Digest ◽  
1972 ◽  
Vol 21 (7) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Elevated Temperatures ◽  
Base Alloy ◽  
Heat Treating ◽  
Nickel Base Alloy ◽  
Temperature Performance ◽  
Nickel Base

Abstract UDIMET 105 is a nickel-base alloy which was developed for service at elevated temperatures. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-175. Producer or source: Special Metals Corporation.

CARPENTER L-605 ALLOY

Alloy Digest ◽  
1987 ◽  
Vol 36 (8) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Elevated Temperatures ◽  
Base Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Temperature Performance ◽  
Cobalt Base Alloy ◽  
Cobalt Base ◽  
Oxidation And Corrosion

Abstract CARPENTER L-605 alloy is a nonmagnetic cobalt-base alloy that has good oxidation and corrosion resistance and high strength at elevated temperatures. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Co-81. Producer or source: Carpenter.

FANSTEEL 85 METAL

Alloy Digest ◽  
1981 ◽  
Vol 30 (6) ◽  
Keyword(s):  
High Temperature ◽  
Physical Properties ◽  
Creep Strength ◽  
Room Temperature ◽  
Elevated Temperatures ◽  
Base Alloy ◽  
Heat Treating ◽  
Good Combination ◽  
Bend Strength ◽  
Temperature Performance

Abstract FANSTEEL 85 METAL is a columbium-base alloy characterized by good fabricability at room temperature, good weldability and a good combination of creep strength and oxidation resistance at elevated temperatures. Its applications include missile and rocket components and many other high-temperature parts. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, tensile properties, and bend strength as well as creep. It also includes information on low and high temperature performance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Cb-7. Producer or source: Fansteel Metallurgical Corporation. Originally published December 1963, revised June 1981.

TOBIN BRONZE 4641

Alloy Digest ◽  
1970 ◽  
Vol 19 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
High Temperature ◽  
Sea Water ◽  
Base Alloy ◽  
Marine Propeller ◽  
Copper Base ◽  
Temperature Performance ◽  
Copper Base Alloy

Abstract Tobin Bronze 4641 is a copper-base alloy highly resistant to dezincification by sea water. It is recommended for marine propeller shafts, hardware and fittings. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness and fatigue. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, machining, and joining. Filing Code: Cu-214. Producer or source: Anaconda American Brass Company.

CANNON-MUSKEGON NICKEL ALLOY C

Alloy Digest ◽  
1978 ◽  
Vol 27 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
High Temperature ◽  
Nickel Alloy ◽  
Elevated Temperatures ◽  
Base Alloy ◽  
Heat Treating ◽  
Oil Refinery ◽  
Nickel Base Alloy ◽  
Temperature Performance ◽  
Nickel Base

Abstract CANNON-MUSKEGON Nickel Alloy C is a cast nickel-base alloy with exceptionally high resistance to corrosion and with excellent high-temperature properties. It also has outstanding oxidation resistance and strength at elevated temperatures. Its many uses include heat-treating equipment, aerospace components and oil-refinery equipment. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance as well as casting, heat treating, machining, and joining. Filing Code: Ni-255. Producer or source: Cannon-Muskegon Corporation.

MST 821

Alloy Digest ◽  
1958 ◽  
Vol 7 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Elevated Temperatures ◽  
Base Alloy ◽  
Heat Treating ◽  
Bend Strength ◽  
Temperature Performance

Abstract MST 821 is a weldable titanium-base alloy having a favorable combination of strength, formability and resistance to creep at elevated temperatures. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and bend strength as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ti-15. Producer or source: Mallory-Sharon Titanium Corporation.

MST 3AL-5CR

Alloy Digest ◽  
1965 ◽  
Vol 14 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Elevated Temperatures ◽  
Base Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Strength Properties ◽  
Temperature Performance ◽  
Plate Forging

Abstract MST 3AL-5CR is a double melted titanium base alloy available in either ingot, bar, rod, plate, forging, or extrusion form. It possesses good creep and high strength properties at room and elevated temperatures to 800 deg. F. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ti-4. Producer or source: Mallory-Sharon Titanium Corporation. Originally published June 1954, revised March 1965.

MST 2.5Al-16V

Alloy Digest ◽  
1960 ◽  
Vol 9 (2) ◽  
Keyword(s):  
Heat Treatment ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
High Temperature ◽  
Elevated Temperatures ◽  
Base Alloy ◽  
Heat Treating ◽  
Age Hardening ◽  
Temperature Performance ◽  
Hardening Heat Treatment

Abstract MST 2.5A1-16V is a titanium-base alloy having a favorable combination of strength, formability and resistance to creep at elevated temperatures. It responds to an age-hardening heat treatment. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and compressive and shear strength as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ti-24. Producer or source: Mallory-Sharon Metals Company.

Sign in / Sign up

Export Citation Format

Share Document