FERRO-TIC CN-5

Alloy Digest ◽  
1976 ◽  
Vol 25 (8) ◽  
Keyword(s):  
Wear Resistance ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Sea Water ◽  
Operating Temperature ◽  
Heat Treating ◽  
Alloy Matrix ◽  
American Corporation ◽  
Copper Nickel Alloy

Abstract FERRO-TIC CN-5 is comprised of ultrahard tungsten carbide micrograins cemented by an age-hardenable copper-nickel alloy matrix. It is particularly suited to resist sea water corrosion. Its structure provides a wear resistance that is unattainable in other alloys with similar corrosion resistance. Its maximum operating temperature is 850 F. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on corrosion resistance as well as forming, heat treating, machining, and surface treatment. Filing Code: Cu-316. Producer or source: Chromalloy American Corporation.

ACCURATE METAL

Alloy Digest ◽  
1969 ◽  
Vol 18 (10) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Nickel Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Temperature Performance ◽  
Copper Nickel Alloy

Abstract ACCURATE METAL is a copper-nickel alloy having high strength, ductility and corrosion resistance. It was especially designed for exacting electronic and electrical applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, joining, and surface treatment. Filing Code: Cu-207. Producer or source: Connecticut Metals Corporation.

DRIVER 180 ALLOY

Alloy Digest ◽  
1978 ◽  
Vol 27 (2) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Nickel Alloy ◽  
Electrical Resistance ◽  
Operating Temperature ◽  
Heat Treating ◽  
Specific Resistivity ◽  
Copper Nickel ◽  
Copper Nickel Alloy

Abstract DRIVER 180 ALLOY is a copper-nickel alloy for use where moderate electrical resistance is required. The number designation refers to its specific resistivity (180 ohms/cir mil/ft) which is combined with a fairly low coefficient of resistance (180 x 10^-6 per C). Its maximum recommended operating temperature is 1000 F. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-348. Producer or source: Wilbur B. Driver Company.

FERRO-TIC CM

Alloy Digest ◽  
1973 ◽  
Vol 22 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Titanium Carbide ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tool Steel ◽  
Heat Treating ◽  
Wear Resistant ◽  
High Chromium ◽  
American Corporation ◽  
Forming Tools

Abstract FERRO-TIC CM is a cemented carbide comprising titanium carbide in a matrix of high-chromium tool steel. It is machinable and heat treatable by conventional means, and is recommended for heavy stamping or forming tools and wear-resistant components. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on corrosion resistance as well as heat treating, machining, joining, and surface treatment. Filing Code: TS-253. Producer or source: Chromalloy American Corporation, Sintercast Division.

TECHALLOY 294

Alloy Digest ◽  
1975 ◽  
Vol 24 (10) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Low Temperature ◽  
Physical Properties ◽  
Temperature Coefficient ◽  
Nickel Alloy ◽  
Electrical Resistance ◽  
Operating Temperature ◽  
Heat Treating ◽  
Wide Range ◽  
Copper Nickel Alloy

Abstract TECHALLOY 294 is a copper-nickel alloy with constant electrical resistance over a wide range of temperatures. It is used widely in rheostats and controls where the maximum operating temperature does not exceed 1000 F. Its low temperature coefficient of electrical resistance and its stability make it highly useful in sizes for instruments and resistors. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-301. Producer or source: Techalloy Company Inc..

DRIVER 60 ALLOY

Alloy Digest ◽  
1977 ◽  
Vol 26 (8) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Temperature Coefficient ◽  
Electrical Resistance ◽  
Operating Temperature ◽  
Heat Treating ◽  
Specific Resistivity ◽  
Temperature Coefficient Of Resistance ◽  
Copper Nickel Alloy

Abstract DRIVER 60 ALLOY is a copper-nickel alloy for use where fairly low electrical resistance is required. The number designation corresponds to its specific resistivity (60 ohms/cir mil/ft) which is combined with a fairly high temperature coefficient of resistance. Its maximum recommended operating temperature is 600 F (316 C). This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-339. Producer or source: Wilbur B. Driver Company.

DRIVER 30 ALLOY

Alloy Digest ◽  
1977 ◽  
Vol 26 (7) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Temperature Coefficient ◽  
Electrical Resistance ◽  
Operating Temperature ◽  
Heat Treating ◽  
Specific Resistivity ◽  
Temperature Coefficient Of Resistance ◽  
Copper Nickel Alloy

Abstract DRIVER 30 ALLOY is a copper-nickel alloy for use where low electrical resistance is required. The number designation corresponds to its specific resistivity (30 ohms/cir mil/ft) which is combined with a relatively high temperature coefficient of resistance. Its maximum recommended operating temperature is 600 F (316 C). This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-337. Producer or source: Wilbur B. Driver Company.

OPTIMAX

Alloy Digest ◽  
1999 ◽  
Vol 48 (8) ◽  
Keyword(s):  
Wear Resistance ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Surface Finish ◽  
Heat Treating

Abstract Mold steels need to meet high demands, especially for surface finish. OPTIMAX is a stainless mold steel designed to have good characteristics in polishability, corrosion resistance, wear resistance, machinability, and hardening. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as heat treating and surface treatment. Filing Code: SS-759. Producer or source: Uddeholm Tooling Svenska AB.

FERRO-TIC DN-1

Alloy Digest ◽  
1977 ◽  
Vol 26 (2) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Aluminum Alloy ◽  
Titanium Carbide ◽  
Physical Properties ◽  
Operating Temperature ◽  
Heat Treating ◽  
Nickel Aluminum ◽  
Powder Metal ◽  
Alloy Matrix ◽  
Aluminum Alloy Matrix

Abstract FERRO-TIC DN-1 is comprised of a dispersion of extremely hard, inert titanium carbide grains in a special age-hardenable nickel-aluminum alloy matrix. It is characterized by excellent resistance to corrosion by strong chlorides. Its maximum operating temperature is 900 F. This datasheet provides information on composition, physical properties, and hardness. It also includes information on corrosion resistance as well as heat treating, machining, surface treatment, and powder metal forms. Filing Code: Ni-241. Producer or source: Chromalloy Metal Tectonics Company.

POLMAX

Alloy Digest ◽  
2005 ◽  
Vol 54 (2) ◽  
Keyword(s):  
Wear Resistance ◽  
Corrosion Resistance ◽  
North America ◽  
Physical Properties ◽  
Surface Treatment ◽  
Heat Treating ◽  
Corrosion Resistant ◽  
Extreme Surface ◽  
Good Corrosion Resistance ◽  
Surface Finishes

Abstract Polmax was developed to be both highly polishable and corrosion resistant for extreme surface finishes such as in lens molds. Polmax has excellent polishability, good corrosion resistance, good wear resistance, good machinability, and good stability in hardening. It is used for applications where extreme surface finishes are required, such as lens molds, molds for compact discs and memory discs, and molds for med-ical applications. This datasheet provides information on composition, physical properties, microstructure, elasticity, and tensile properties. It also includes information on corrosion resistance and surface qualities as well as heat treating and surface treatment. Filing Code: SS-918. Producer or source: Böhler-Uddeholm North America.

CUFENLOY-30

Alloy Digest ◽  
1965 ◽  
Vol 14 (7) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Stress Corrosion ◽  
Nickel Alloy ◽  
Heat Treating ◽  
Heat Treated ◽  
Resistance To Stress ◽  
Cold Worked ◽  
Copper Nickel Alloy

Abstract CUFENLOY 30 is a 70/30 copper-nickel alloy specially cold worked and heat treated develop a desirable combination of strength, ductility, and resistance to stress corrosion. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Cu-153. Producer or source: Phelps Dodge Copper Products Corporation.

Sign in / Sign up

Export Citation Format

Share Document