COPPER ALLOY No. C12100

Alloy Digest ◽  
1980 ◽  
Vol 29 (9) ◽  
Keyword(s):  
Electrical Conductivity ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Annealed Condition ◽  
Wide Range ◽  
Cold Worked

Abstract Copper No. C12100 is a silver-bearing copper deoxidized with phosphorus but with the phosphorus maintained at a low level (nominally 0.008%) to achieve good electrical conductivity. In the annealed condition it has low strength but can be cold worked to moderate strength levels. It is suitable for use in a wide range of electrical, architectural and hardware applications. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-402. Producer or source: Copper and copper alloy mills.

COPPER ALLOY No. 120

Alloy Digest ◽  
1972 ◽  
Vol 21 (12) ◽  
Keyword(s):  
Electrical Conductivity ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Residual Phosphorus ◽  
Low Level

Abstract COPPER No. 120 is a phosphorus deoxidized copper in which the residual phosphorus is maintained at a low level to acheive a good electrical conductivity. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-263. Producer or source: Copper and copper alloy mills.

COPPER ALLOY No. C43400

Alloy Digest ◽  
1984 ◽  
Vol 33 (12) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Good Ductility ◽  
Copper Zinc ◽  
Cold Worked

Abstract Copper Alloy No. C43400 is a copper-zinc-tin alloy that can be cold worked readily by all conventional processes. It has moderate strength and good ductility. This alloy is used typically for electrical switch parts, contacts and relay springs. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Cu-488. Producer or source: Brass mills.

COPPER ALLOY No. 330

Alloy Digest ◽  
1975 ◽  
Vol 24 (3) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Cold Working ◽  
Heat Treating ◽  
Industrial Applications ◽  
Wide Range

Abstract Copper Alloy No. 330 is a brass containing nominally 0.5% lead. It has good machinability, excellent cold-working properties, and a wide range of uses including general purposes, industrial applications, munitions and plumbing. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-294. Producer or source: Brass mills.

COPPER ALLOY No. C41500

Alloy Digest ◽  
1983 ◽  
Vol 32 (8) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Excellent Performance ◽  
Copper Zinc ◽  
Cold Worked

Abstract Copper Alloy No. C41500 is a copper-zinc-tin alloy with good strength and good ductility. It can be cold worked readily by conventional processes. It has excellent performance in brazing and soldering; it can be welded by several processes. A typical use is springs for electrical switches. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Cu-462. Producer or source: Copper and copper alloy mills.

COPPER ALLOY No. C27000

Alloy Digest ◽  
1981 ◽  
Vol 30 (7) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Cold Working ◽  
Heat Treating ◽  
Good Resistance ◽  
Medium Strength ◽  
Cold Worked

Abstract Copper Alloy No. C27000 is a medium-strength brass with good ductility. It has excellent cold-working characteristics and good resistance to corrosion. It can be cold worked by all of the conventional fabrication processes. Among its many applications are architectural, automotive, electrical, hardware, plumbing and products made from wire. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-419. Producer or source: Brass mills.

COPPER ALLOY No. C61800

Alloy Digest ◽  
1985 ◽  
Vol 34 (2) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Aluminum Bronze ◽  
Good Resistance ◽  
Corrosion Resistant ◽  
Cold Worked

Abstract Copper Alloy No. C61800 is an aluminum bronze containing nominally 89% copper, 10% aluminum and 1% iron. It has moderate strength, moderate ductility and can be hot worked or cold worked successfully. It has good resistance to corrosion in many environments. Its numerous uses include bushings, bearings, corrosion-resistant components and welding rod. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-492. Producer or source: Copper and copper alloy mills.

COPPER ALLOY No. 411

Alloy Digest ◽  
1975 ◽  
Vol 24 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Small Addition

Abstract Copper Alloy No. 411 is brass with a small addition of tin. It has good formability, weldability and corrosion resistance and is recommended for such applications as bearings, bushings, jewelry and stamped hardware. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-296. Producer or source: Brass mills.

MUNTZ METAL

Alloy Digest ◽  
1955 ◽  
Vol 4 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Zinc Alloy ◽  
Good Strength ◽  
Copper Zinc

Abstract MUNTZ METAL is a 60-40 copper-zinc alloy having good strength but low ductility. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: Cu-25. Producer or source: Copper alloy mills.

ANACONDA ALLOY 268

Alloy Digest ◽  
1982 ◽  
Vol 31 (8) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Cold Working ◽  
Heat Treating ◽  
Zinc Alloy ◽  
Wide Range ◽  
Copper Zinc ◽  
Cold Worked

Abstract ANACONDA Alloy 268 is a copper-zinc alloy with excellent cold-working properties; it can be cold worked by all the conventional fabrication processes. Its corrosion resistance is excellent-to-good in most environments. This alloy has a wide range of applications including items such as springs, bathroom fixtures, automotive radiators, lamp sockets and sanitary traps. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-442. Producer or source: Anaconda American Brass Company.

COPPER ALLOY No. 165

Alloy Digest ◽  
1977 ◽  
Vol 26 (2) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
High Strength ◽  
Heat Treating ◽  
High Ductility ◽  
Electrical Conductor ◽  
Annealed Condition ◽  
Low Strength

Abstract Copper Alloy No. 165 is a copper-cadmium-tin alloy with low strength and high ductility in the annealed condition. In the hard-drawn condition, characterized by high strength and low ductility, it is used widely as an electrical conductor. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-327. Producer or source: Copper and copper alloy mills.

Sign in / Sign up

Export Citation Format

Share Document