AMPCOLOY 712

Alloy Digest ◽  
1981 ◽  
Vol 30 (7) ◽  
Keyword(s):  
Tensile Strength ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Heat Treating ◽  
Good Combination ◽  
Casting Alloy ◽  
Wear And Corrosion ◽  
Medium Strength ◽  
Resistance To Wear ◽  
Cast Condition

Abstract AMPCOLOY 712 is a medium-strength casting alloy. Its typical tensile strength is 60,000 psi in the as-cast condition. It has a good combination of strength, ductility and resistance to wear and corrosion. It is used widely for gears and formerly was known as Nickel Gear Bronze. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-420. Producer or source: Ampco Metal Inc..

AMPCOLOY 711

Alloy Digest ◽  
1980 ◽  
Vol 29 (9) ◽  
Keyword(s):  
Tensile Strength ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Good Combination ◽  
Casting Alloy ◽  
Medium Strength ◽  
Cast Condition

Abstract AMPCOLOY 711 is a medium-strength casting alloy; its typical tensile strength is 55,000 psi in the as-cast condition. It has a good combination of strength, ductility and resistance to corrosion. Among its many uses are bushings, gears, pumps, propellers, valves and marine hardware. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-403. Producer or source: Ampco Metal Inc..

AMPCOLOY 54

Alloy Digest ◽  
1981 ◽  
Vol 30 (12) ◽  
Keyword(s):  
Tensile Strength ◽  
Wear Resistance ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Good Combination ◽  
Casting Alloy ◽  
Medium Strength ◽  
Cast Condition

Abstract AMPCOLOY 54 is a casting alloy of low-to-medium strength. In the as-cast condition it has a typical tensile strength of 47,000 psi. This alloy has a good combination of strength, ductility, corrosion resistance and wear resistance. Ampcoloy 54 was formerly known as Nickel Gear Bronze. Its uses include gears, fittings, bearings and bushings. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, and machining. Filing Code: Cu-428. Producer or source: Ampco Metal Inc..

COPPER ALLOY No. C91700

Alloy Digest ◽  
1986 ◽  
Vol 35 (12) ◽  
Keyword(s):  
Tensile Strength ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Corrosion And Wear ◽  
Good Combination ◽  
Casting Alloy ◽  
Medium Strength ◽  
Cast Condition

Abstract Copper Alloy No. C91700 is a medium strength casting alloy. Formerly it was known as Nickel Gear Bronze and 861/2-12- 0-0-11/2; these names are no longer recommended. It has a good combination of strength, ductility and resistance to corrosion and wear. Its typical tensile strength is 60,000 psi in the as-cast condition. Typical applications include gears and worm wheels. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-519. Producer or source: Copper alloy foundries.

AMPCOLOY 64

Alloy Digest ◽  
1980 ◽  
Vol 29 (6) ◽  
Keyword(s):  
Tensile Strength ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Casting Alloy ◽  
Cast Condition

Abstract AMPCOLOY 64 is a casting alloy that is frequently classified as a high-strength yellow brass; its typical tensile strength is 95,000 psi in the as-cast condition. This alloy has an excellent combination of strength, ductility and resistance to corrosion. Its numerous applications include propellers, bearings, gears and marine hardware. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-396. Producer or source: Ampco Metal Inc..

BRUSH ALLOY 200C

Alloy Digest ◽  
1969 ◽  
Vol 18 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
High Resistance ◽  
Heat Treating ◽  
Casting Alloy ◽  
Temperature Performance ◽  
Resistance To Wear

Abstract BRUSII Alloy 200C is a beryllium-nickel casting alloy having high resistance to wear, corrosion, thermal shock and oxidation. It is recommended for fuel pump impellers, turbines, non-sparking tools, molds for plastics and glass. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, joining, and surface treatment. Filing Code: Ni-142. Producer or source: Brush Beryllium Company.

ELEKTRON ZE41A

Alloy Digest ◽  
1970 ◽  
Vol 19 (10) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Surface Treatment ◽  
Heat Treating ◽  
Casting Alloy ◽  
Creep Properties ◽  
Magnesium Casting ◽  
Medium Strength ◽  
High Integrity

Abstract ELEKTRON ZE41A is a medium-strength, high-integrity magnesium casting alloy which is fully weldable and has good fatigue and creep properties. It has maximum freedom from microporosity and is applicable up to 320 F. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and shear strength as well as creep and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, joining, and surface treatment. Filing Code: Mg-70. Producer or source: Magnesium Elektron Inc..

AMPCOLOY E-5

Alloy Digest ◽  
1977 ◽  
Vol 26 (1) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Iron Alloy ◽  
Heat Treating ◽  
Good Resistance ◽  
Medium Strength ◽  
Aluminum Iron ◽  
Resistance To Wear ◽  
Copper Aluminum

Abstract AMPCOLOY E-5 is a copper-aluminum-iron alloy characterized by medium strength, good hot-working properties and good machinability. Its resistance to corrosion is excellent in many environments. It also has good resistance to wear. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-325. Producer or source: Ampco Metal Inc..

COPPER ALLOY No. C90900

Alloy Digest ◽  
1985 ◽  
Vol 34 (3) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Good Combination ◽  
Tin Bronze ◽  
Medium Strength ◽  
Strength Alloy

Abstract Copper Alloy No. C90900 is a cast copper-tin alloy which also is known by names formerly used (but not recommended): Tin Bronze, 199 and 87-13-0-0. It is a medium-strength alloy and has a good combination of strength, ductility and resistance to corrosion. Its uses include bearings, bushings, valves, nuts and marine hardware. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-494. Producer or source: Copper alloy foundries.

ABEX SPA Alloy

Alloy Digest ◽  
1979 ◽  
Vol 28 (1) ◽  
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Coal Gasification ◽  
Heat Treating ◽  
Casting Alloy

Abstract ABFX SPA Alloy is a casting alloy that is unsurpassed in an application where no other alloys have ever been successful a combined corrosive and erosive environment typically characterized by fluids with 2.5 to 4.0 pH with abrasives present. This alloy is relatively brittle and after hardening it has a tensile strength of about 95,000 psi and a compressive strength of 360,000 psi. Typical applications are pump parts, mixers and coal-gasification components. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength. It also includes information on corrosion resistance as well as casting, heat treating, machining, joining, and surface treatment. Filing Code: CI-47. Producer or source: Abex Corporation, Engineered Products Division.

ELEKTRON ZREO

Alloy Digest ◽  
1955 ◽  
Vol 4 (7) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Creep Resistance ◽  
Heat Treating ◽  
Casting Alloy ◽  
Temperature Performance ◽  
Medium Strength

Abstract ELEKTRON ZREO is a medium strength magnesium base casting alloy of very similar creep resistance to Elektron ZRE1 It possesses optimum corrosion resistance in marine type exposure environments with freedom from sporadic deep pitting combined with good castability. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, joining, and surface treatment. Filing Code: Mg-18. Producer or source: Aluminium Laboratories Ltd.

Sign in / Sign up

Export Citation Format

Share Document