ELEKTRON ZE41A

Alloy Digest ◽  
1970 ◽  
Vol 19 (10) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Surface Treatment ◽  
Heat Treating ◽  
Casting Alloy ◽  
Creep Properties ◽  
Magnesium Casting ◽  
Medium Strength ◽  
High Integrity

Abstract ELEKTRON ZE41A is a medium-strength, high-integrity magnesium casting alloy which is fully weldable and has good fatigue and creep properties. It has maximum freedom from microporosity and is applicable up to 320 F. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and shear strength as well as creep and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, joining, and surface treatment. Filing Code: Mg-70. Producer or source: Magnesium Elektron Inc..

ALUMINUM 520.0

Alloy Digest ◽  
1982 ◽  
Vol 31 (3) ◽  
Keyword(s):  
Mechanical Properties ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Casting Alloy ◽  
Temperature Performance ◽  
Magnesium Casting

Abstract ALUMINUM 520.0 is an aluminum-magnesium casting alloy containing nominally 10% magnesium. It is characterized by an excellent combination of machinability, mechanical properties and resistance to corrosion. Typical applications are railroad passenger car frames and marine parts. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-237. Producer or source: Various aluminum companies.

ELEKTRON ZT1

Alloy Digest ◽  
1953 ◽  
Vol 2 (3) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Room Temperature ◽  
Heat Treating ◽  
Casting Alloy ◽  
Jet Engine ◽  
Magnesium Casting

Abstract ELEKTRON ZT1 is distinguished by the best combination of properties at temperatures of and above 600 F of any magnesium casting alloy; also by excellent room temperature properties, by freedom from microporosity, and exceptionally good founding characteristics. Very suitable for jet engine parts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and surface treatment. Filing Code: Mg-4. Producer or source: Aluminum Laboratories Ltd.

ELEKTRON ZREO

Alloy Digest ◽  
1955 ◽  
Vol 4 (7) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Creep Resistance ◽  
Heat Treating ◽  
Casting Alloy ◽  
Temperature Performance ◽  
Medium Strength

Abstract ELEKTRON ZREO is a medium strength magnesium base casting alloy of very similar creep resistance to Elektron ZRE1 It possesses optimum corrosion resistance in marine type exposure environments with freedom from sporadic deep pitting combined with good castability. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, joining, and surface treatment. Filing Code: Mg-18. Producer or source: Aluminium Laboratories Ltd.

WIELAND-Z30

Alloy Digest ◽  
2005 ◽  
Vol 54 (8) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Cold Working ◽  
Heat Treating ◽  
Good Strength ◽  
Metalworking Industry

Abstract Wieland-Z30 has good hot and cold working properties and good strength. The alloy is easily machined and used often in the metalworking industry. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CU-735. Producer or source: Wieland Metals Inc., Wieland-Werke AG.

MEEHANITE GF-20

Alloy Digest ◽  
1973 ◽  
Vol 22 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Cast Iron ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Gray Cast Iron ◽  
Heat Treating ◽  
Gray Cast

Abstract MEEHANITE GF-20 is a gray cast iron designed principally for high machinability and is used where strength is not an important factor. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, joining, and surface treatment. Filing Code: CI-39. Producer or source: Meehanite Metal Corporation.

ALUMINUM 212

Alloy Digest ◽  
1966 ◽  
Vol 15 (3) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Sand Casting ◽  
Casting Alloy ◽  
Aluminum Company ◽  
Aluminum Base

Abstract Aluminum 212 is a copper, silicon, aluminum-base sand casting alloy having good machinability and good castability. It is recommended for general machinery and utility castings. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-153. Producer or source: Aluminum Company of America.

ALCAN 350

Alloy Digest ◽  
1957 ◽  
Vol 6 (7) ◽  
Keyword(s):  
Mechanical Properties ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Heat Treating ◽  
Casting Alloy ◽  
Aluminum Casting ◽  
Aluminum Casting Alloy ◽  
Good Corrosion Resistance ◽  
Aluminum Company

Abstract ALCAN 350 is a 10% magnesium-aluminum casting alloy having high mechanical properties, excellent machinability, and good corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-52. Producer or source: Aluminum Company of Canada Ltd.

APEX 417

Alloy Digest ◽  
1958 ◽  
Vol 7 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Dimensional Stability ◽  
High Strength ◽  
Heat Treating ◽  
Casting Alloy ◽  
Excellent Corrosion Resistance ◽  
Magnesium Casting ◽  
Strength And Ductility

Abstract APEX 417 is an aluminum-magnesium casting alloy having high strength and ductility, excellent corrosion resistance and good dimensional stability. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-61. Producer or source: Apex Smelting Company.

MAGNESIUM AZ91B

Alloy Digest ◽  
1958 ◽  
Vol 7 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Die Casting ◽  
Casting Alloy ◽  
Casting Industry ◽  
Magnesium Die Casting

Abstract MAGNESIUM AZ91B is a standard magnesium die casting alloy patterned for the needs of the commercial casting industry. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as casting, machining, and surface treatment. Filing Code: Mg-36. Producer or source: Apex Smelting Company.

BRUSH ALLOY 200C

Alloy Digest ◽  
1969 ◽  
Vol 18 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
High Resistance ◽  
Heat Treating ◽  
Casting Alloy ◽  
Temperature Performance ◽  
Resistance To Wear

Abstract BRUSII Alloy 200C is a beryllium-nickel casting alloy having high resistance to wear, corrosion, thermal shock and oxidation. It is recommended for fuel pump impellers, turbines, non-sparking tools, molds for plastics and glass. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, joining, and surface treatment. Filing Code: Ni-142. Producer or source: Brush Beryllium Company.

Sign in / Sign up

Export Citation Format

Share Document