DOWMETAL R and RC

Alloy Digest ◽  
1955 ◽  
Vol 4 (5) ◽  
Keyword(s):  
Mechanical Properties ◽  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Die Casting ◽  
Permanent Mold ◽  
Good Resistance ◽  
Chemical Company ◽  
Casting Alloys ◽  
Permanent Mold Castings

Abstract DOWMETAL R and DOWMETAL RC, the die casting alloys in most general use, are the 9% A1, 1% Zn magnesium alloys AZ91A and AZ91B. They combine good mechanical properties, good casting characteristics and good resistance to corrosion. A variation, designated as Dowmetal AZ91C, is used for sand and permanent mold castings. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as casting, machining, and surface treatment. Filing Code: Mg-17. Producer or source: The Dow Chemical Company.

AZ91D and AZ91E ALLOYS

Alloy Digest ◽  
1988 ◽  
Vol 37 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Die Casting ◽  
Heat Treating ◽  
Permanent Mold ◽  
Corrosion Resistant ◽  
Chemical Company ◽  
Manganese Alloys ◽  
Die Castings ◽  
Permanent Mold Castings

Abstract AZ91D and AZ91E alloys are magnesium-aluminum-zinc-manganese alloys of closely controlled purity. Ingot is available for use in the production of improved corrosion resistant sand, permanent-mold and die castings. AZ91D is used for die casting and AZ91E for sand and permanent-mold castings. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Mg-73. Producer or source: The Dow Chemical Company.

APEX 910

Alloy Digest ◽  
1956 ◽  
Vol 5 (10) ◽  
Keyword(s):  
Mechanical Properties ◽  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
High Temperature ◽  
Die Casting ◽  
Heat Treating ◽  
Casting Alloy ◽  
Good Resistance ◽  
Temperature Performance

Abstract APEX 910 is a magnesium die casting alloy containing about 9% aluminum. It combines good mechanical properties, good casting characteristics, and good resistance to corrosion. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and surface treatment. Filing Code: Mg-28. Producer or source: Apex Smelting Company.

FEDERATED F0120

Alloy Digest ◽  
1976 ◽  
Vol 25 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Aluminum Alloy ◽  
Die Casting ◽  
Heat Treating ◽  
Permanent Mold ◽  
Good Resistance ◽  
Temperature Performance ◽  
Thin Walled

Abstract FEDERATED F0120 is a high-silicon aluminum alloy suitable for sand, permanent-mold and die casting. It is used for intricate thin-walled castings requiring pressure tightness, toughness and good resistance to corrosion. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness and fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-221. Producer or source: Federated Metals Corporation, ASARCO Inc..

ZA-12

Alloy Digest ◽  
1990 ◽  
Vol 39 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Die Casting ◽  
Casting Alloys ◽  
Die Cast ◽  
The Family ◽  
Aluminum Smelting ◽  
Cold Chamber ◽  
Intermediate Member

Abstract ZA-12 is the intermediate member of the family of three ZA die-casting alloys. Its melting point, solidification range and recommended casting-temperature range are greater than those of ZA-8. (See Alloy Digest Zn-48, January 1990). Due to these factors, ZA-12 must be die cast in cold chamber die-casting machines like conventional aluminum die-casting alloys. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as forming, machining, and surface treatment. Filing Code: Zn-49. Producer or source: Aluminum Smelting and Refining Company Inc.. See also Alloy Digest Zn-31, September 1977.

MAGNESIUM AZ91A

Alloy Digest ◽  
1966 ◽  
Vol 15 (7) ◽  
Keyword(s):  
Mechanical Properties ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
High Temperature ◽  
Physical Properties ◽  
Die Casting ◽  
Heat Treating ◽  
Casting Alloy ◽  
Good Resistance ◽  
Temperature Performance

Abstract Magnesium AZ91A is a magnesium die casting alloy combining good mechanical properties, good casting characteristics and good resistance to corrosion. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, joining, and surface treatment. Filing Code: Mg-61. Producer or source: Magnesium Elektron Ltd.

RIO TINTO ALLOYS 206.2, A206.2, B206.2

Alloy Digest ◽  
2020 ◽  
Vol 69 (1) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Permanent Mold ◽  
Automotive Applications ◽  
Casting Alloys ◽  
Rio Tinto ◽  
Magnesium Casting ◽  
Permanent Mold Castings ◽  
Río Tinto

Abstract Rio Tinto Alloys 206.2, A206.2, and B206.2 are heat-treatable, aluminum-copper-magnesium casting alloys in ingot form for remelting. These alloys are primarily intended for producing sand and permanent mold castings for aerospace and automotive applications. This datasheet provides information on composition, physical properties, hardness, tensile properties, and shear strength. It also includes information on corrosion resistance as well as casting, machining, and joining. Filing Code: Al-460. Producer or source: Rio Tinto Limited.

ALUMINUM 413.0

Alloy Digest ◽  
1977 ◽  
Vol 26 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Silicon Content ◽  
Die Casting ◽  
Heat Treating ◽  
Casting Alloy ◽  
Permanent Mold ◽  
Good Resistance ◽  
Temperature Performance ◽  
Thin Walled ◽  
Permanent Mold Castings

Abstract ALUMINUM 413.0 is normally classified as a die-casting alloy; however, it also can be used for sand and permanent-mold castings. Its high silicon content (12%) lowers its melting temperature and increases its fluidity, thus improving its castability. It is used for intricate thin-walled castings requiring pressure tightness, toughness and good resistance to corrosion. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness and fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-231. Producer or source: Various aluminum companies.

DOMAL AZ91X

Alloy Digest ◽  
1954 ◽  
Vol 3 (8) ◽  
Keyword(s):  
Mechanical Properties ◽  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
High Temperature ◽  
Physical Properties ◽  
Die Casting ◽  
Heat Treating ◽  
Casting Alloy ◽  
Temperature Performance

Abstract DOMAL AZ91Z is a 9% Al, 1% Zn, magnesium die casting alloy. It combines good mechanical properties, casting characteristics and resistance to corrosion. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, and machining. Filing Code: Mg-11. Producer or source: Dominion Magnesium Ltd.

DI-METAL 3

Alloy Digest ◽  
1956 ◽  
Vol 5 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Tensile Strength ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Base Alloy ◽  
Die Casting ◽  
Heat Treating ◽  
Casting Alloys ◽  
Fine Detail ◽  
Die Castings

Abstract DI-METAL 3 is a zinc-base alloy of high fluidity capable of producing fine detail in die castings. It is the most stable of the zinc die casting alloys, but on aging loses about 20% of its tensile strength with practically no impact drop. This datasheet provides information on composition, physical properties, hardness, tensile properties, and shear strength as well as fracture toughness. It also includes information on corrosion resistance as well as casting, forming, heat treating, machining, and joining. Filing Code: Zn-3. Producer or source: Federated Metals Corporation, ASARCO Inc..

DOWMETAL C

Alloy Digest ◽  
1954 ◽  
Vol 3 (10) ◽  
Keyword(s):  
Fracture Toughness ◽  
Tensile Strength ◽  
Corrosion Resistance ◽  
Base Alloy ◽  
Heat Treating ◽  
Permanent Mold ◽  
High Tensile Strength ◽  
Bearing Strength ◽  
Chemical Company ◽  
Permanent Mold Castings

Abstract DOWMETAL-C is a heat-treatable magnesium-base alloy suitable for sand and permanent mold castings. It has high tensile strength and good yield strength. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive, shear, and bearing strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as heat treating, machining, joining, and surface treatment. Filing Code: Mg-13. Producer or source: The Dow Chemical Company.

Sign in / Sign up

Export Citation Format

Share Document