DOWMETAL C

Alloy Digest ◽  
1954 ◽  
Vol 3 (10) ◽  
Keyword(s):  
Fracture Toughness ◽  
Tensile Strength ◽  
Corrosion Resistance ◽  
Base Alloy ◽  
Heat Treating ◽  
Permanent Mold ◽  
High Tensile Strength ◽  
Bearing Strength ◽  
Chemical Company ◽  
Permanent Mold Castings

Abstract DOWMETAL-C is a heat-treatable magnesium-base alloy suitable for sand and permanent mold castings. It has high tensile strength and good yield strength. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive, shear, and bearing strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as heat treating, machining, joining, and surface treatment. Filing Code: Mg-13. Producer or source: The Dow Chemical Company.

AZ91D and AZ91E ALLOYS

Alloy Digest ◽  
1988 ◽  
Vol 37 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Die Casting ◽  
Heat Treating ◽  
Permanent Mold ◽  
Corrosion Resistant ◽  
Chemical Company ◽  
Manganese Alloys ◽  
Die Castings ◽  
Permanent Mold Castings

Abstract AZ91D and AZ91E alloys are magnesium-aluminum-zinc-manganese alloys of closely controlled purity. Ingot is available for use in the production of improved corrosion resistant sand, permanent-mold and die castings. AZ91D is used for die casting and AZ91E for sand and permanent-mold castings. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Mg-73. Producer or source: The Dow Chemical Company.

DOWMETAL M

Alloy Digest ◽  
1953 ◽  
Vol 2 (2) ◽  
Keyword(s):  
Heat Treatment ◽  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Base Alloy ◽  
Bearing Strength ◽  
Chemical Company ◽  
Hardening Heat Treatment

Abstract DOWMETAL M is a manganese type magnesium base alloy which does not respond to hardening heat treatment, but is recommended where maximum formability and weldability are desired. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive, shear, and bearing strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as forming, machining, and joining. Filing Code: Mg-3. Producer or source: The Dow Chemical Company.

CMW 73

Alloy Digest ◽  
2000 ◽  
Vol 49 (11) ◽  
Keyword(s):  
Thermal Conductivity ◽  
Tensile Strength ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Base Alloy ◽  
Heat Treating ◽  
High Tensile Strength ◽  
Copper Base ◽  
Copper Base Alloy

Abstract CMW 73 is a heat treatable copper-base alloy having high tensile strength and hardness coupled with fair electrical and thermal conductivity. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as casting, forming, heat treating, machining, and joining. Filing Code: CU-129. Producer or source: CMW Inc. Originally published as Mallory 73, June 1963, revised November 2000.

FEDERATED F4110

Alloy Digest ◽  
1977 ◽  
Vol 26 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Heat Treating ◽  
General Purpose ◽  
Hot Cracking ◽  
Permanent Mold ◽  
Temperature Performance ◽  
Thin Walled ◽  
Die Castings ◽  
Permanent Mold Castings

Abstract FEDERATED F4110 is a general-purpose alloy for making intricate die castings. It is also used for thin-walled, complicated permanent-mold castings where maximum fluidity, pressure tightness and resistance to hot cracking are required. It has excellent castability and foundry characteristics, fair machinability and good strength. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness and fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-226. Producer or source: Federated Metals Corporation, ASARCO Inc..

DOWMETAL AZ91C

Alloy Digest ◽  
1956 ◽  
Vol 5 (6) ◽  
Keyword(s):  
Base Alloy ◽  
Heat Treating ◽  
Permanent Mold ◽  
Aged Condition ◽  
Chemical Company ◽  
Temperature Performance ◽  
Treated Condition ◽  
Heat Treated ◽  
Heat Treated Condition ◽  
Permanent Mold Castings

Abstract DOWMETAL AZ91C is a heat treatable magnesium base alloy suitable for sand and permanent mold castings. It combines good tensile strength and yield strength with good elongation and is used in both the solution heat treated condition (T4) and in the solution heat treated plus artificially aged condition (T6). This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as heat treating, machining, and joining. Filing Code: Mg-25. Producer or source: The Dow Chemical Company, Bay City Division.

FEDERATED F1121Ni

Alloy Digest ◽  
1977 ◽  
Vol 26 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Strength ◽  
Heat Treating ◽  
Permanent Mold ◽  
Cast Material ◽  
Temperature Performance ◽  
Solution Treated ◽  
Nickel Copper ◽  
Permanent Mold Castings

Abstract FEDERATED F1121 Ni is a heat-treatable aluminum-silicon-nickel-copper-magnesium alloy used for high-strength permanent-mold castings. It can be solution treated and aged, or the as-cast material can be aged to increase hardness and strength. Its uses include pistons and pulleys. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-225. Producer or source: Federated Metals Corporation, ASARCO Inc..

DOWMETAL R and RC

Alloy Digest ◽  
1955 ◽  
Vol 4 (5) ◽  
Keyword(s):  
Mechanical Properties ◽  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Die Casting ◽  
Permanent Mold ◽  
Good Resistance ◽  
Chemical Company ◽  
Casting Alloys ◽  
Permanent Mold Castings

Abstract DOWMETAL R and DOWMETAL RC, the die casting alloys in most general use, are the 9% A1, 1% Zn magnesium alloys AZ91A and AZ91B. They combine good mechanical properties, good casting characteristics and good resistance to corrosion. A variation, designated as Dowmetal AZ91C, is used for sand and permanent mold castings. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as casting, machining, and surface treatment. Filing Code: Mg-17. Producer or source: The Dow Chemical Company.

ALUMINUM A332.0

Alloy Digest ◽  
1975 ◽  
Vol 24 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Strength ◽  
Heat Treating ◽  
Permanent Mold ◽  
Cast Material ◽  
Temperature Performance ◽  
Solution Treated ◽  
Nickel Copper ◽  
Permanent Mold Castings

Abstract ALUMINUM A332.0 is an aluminum-silicon-nickel-copper-magnesuim alloy recommended for high-strength permanent-mold castings. The as-cast material can be aged to increase hardness and strength, or it can be solution treated and aged. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-216. Producer or source: Various aluminum companies.

AISI TYPE 301

Alloy Digest ◽  
1957 ◽  
Vol 6 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Tensile Strength ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Cold Working ◽  
Heat Treating ◽  
High Tensile Strength ◽  
Temperature Performance ◽  
Aisi Type

Abstract AISI TYPE 301 is an austenitic 17-7 type chromium nickel stainless steel capable of attaining high tensile strength with good ductility by moderate or severe cold working. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-54. Producer or source: Stainless steel foundries.

DI-METAL 3

Alloy Digest ◽  
1956 ◽  
Vol 5 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Tensile Strength ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Base Alloy ◽  
Die Casting ◽  
Heat Treating ◽  
Casting Alloys ◽  
Fine Detail ◽  
Die Castings

Abstract DI-METAL 3 is a zinc-base alloy of high fluidity capable of producing fine detail in die castings. It is the most stable of the zinc die casting alloys, but on aging loses about 20% of its tensile strength with practically no impact drop. This datasheet provides information on composition, physical properties, hardness, tensile properties, and shear strength as well as fracture toughness. It also includes information on corrosion resistance as well as casting, forming, heat treating, machining, and joining. Filing Code: Zn-3. Producer or source: Federated Metals Corporation, ASARCO Inc..

Sign in / Sign up

Export Citation Format

Share Document