COLMONOY NO. 43HV

Alloy Digest ◽  
2008 ◽  
Vol 57 (7) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
High Velocity ◽  
Base Alloy ◽  
Heat Treating ◽  
High Velocity Oxygen Fuel ◽  
Nickel Base Alloy ◽  
Nickel Base ◽  
Oxygen Fuel

Abstract Colmonoy No. 43HV comprises a nickel-base alloy recommended for hard surfacing parts to resist wear, corrosion, heat, and galling. Deposits that have moderate hardness have increased ductility and slightly less resistance to abrasion than Colmonoy 53HV. Deposits can be finished by grinding or machined with carbide tooling. Colmonoy No. 43HV is supplied as an atomized powder specially sized for application with high-velocity oxygen fuel (HVOF) systems. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance and surface qualities as well as heat treating and surface treatment. Filing Code: Ni-664. Producer or source: Wall Colmonoy Corporation.

COLMONOY NO. 63HV

Alloy Digest ◽  
2008 ◽  
Vol 57 (9) ◽  
Keyword(s):  
Surface Treatment ◽  
Thermal Spray ◽  
High Velocity ◽  
Base Alloy ◽  
Heat Treating ◽  
High Velocity Oxygen Fuel ◽  
Nickel Base Alloy ◽  
Powder Metal ◽  
Nickel Base ◽  
Oxygen Fuel

Abstract Colmonoy No. 63HV is a nickel-base alloy recommended for hard surfacing parts to resist wear, corrosion, heat, and galling. The hardness of Colmonoy 63HV ranges to 58–61 HRC, and it is resistant to abrasion. Colmonoy 63HV is sized exclusively for high-velocity oxygen-fuel thermal spray systems. This datasheet provides information on composition. It also includes information on heat treating, surface treatment, and powder metal forms. Filing Code: Ni-665. Producer or source: Wall Colmonoy Corporation.

UDIMET 520

Alloy Digest ◽  
1962 ◽  
Vol 11 (9) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Elevated Temperatures ◽  
Base Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Nickel Base Alloy ◽  
Nickel Base

Abstract UDIMET 520 is a nickel-base alloy recommended for applications where high strength at elevated temperatures is required. It is suitable for service at temperatures up to 1800 F. This datasheet provides information on composition, physical properties, and tensile properties as well as creep. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-74. Producer or source: Special Metals Inc..

UDIMET 105

Alloy Digest ◽  
1972 ◽  
Vol 21 (7) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Elevated Temperatures ◽  
Base Alloy ◽  
Heat Treating ◽  
Nickel Base Alloy ◽  
Temperature Performance ◽  
Nickel Base

Abstract UDIMET 105 is a nickel-base alloy which was developed for service at elevated temperatures. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-175. Producer or source: Special Metals Corporation.

FIRTH FS-718

Alloy Digest ◽  
1966 ◽  
Vol 15 (3) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Gas Turbine ◽  
Base Alloy ◽  
Heat Treating ◽  
Nickel Base Alloy ◽  
Temperature Performance ◽  
Nickel Base

Abstract FIRTH FS-718 is an austenitic nickel-base alloy having good cryogenic properties, and excellent strength and oxidation resistance up to 1300 F. It is highly recommended for missile and gas turbine components. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-112. Producer or source: Firth Sterling Inc..

NICROFER 4626MoW

Alloy Digest ◽  
1993 ◽  
Vol 42 (7) ◽  
Keyword(s):  
Solid Solution ◽  
Corrosion Resistance ◽  
Mechanical Strength ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Base Alloy ◽  
Heat Treating ◽  
Nickel Base Alloy ◽  
Nickel Base

Abstract Nicrofer 4626MoW is a solid-solution nickel-base alloy with equal additions of molybdenum, cobalt and tungsten. The alloy is normally used above 1472 F (800 C) and has good mechanical strength with resistance to creep, carburization, oxidation and sulfidation. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-436. Producer or source: VDM Technologies Corporation.

ILLIUM

Alloy Digest ◽  
1952 ◽  
Vol 1 (3) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Base Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Extreme Heat ◽  
Nickel Base Alloy ◽  
Nickel Base

Abstract ILLIUM is a nickel-base alloy containing high percentages of chromium, molybdenum, copper and iron. It has unusual corrosion resistance, high strength, machinability, and ability to resist erosion. It is an excellent alloy where extreme heat and corrosion are encountered. Illium is marketed in two grades, namely, Illium G and Illium R. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-1. Producer or source: The Illium Corporation.

UDIMET 115

Alloy Digest ◽  
1972 ◽  
Vol 21 (2) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Elevated Temperatures ◽  
Base Alloy ◽  
Heat Treating ◽  
Nickel Base Alloy ◽  
Temperature Performance ◽  
Nickel Base

Abstract UDIMET 115 is a precipitation hardenable nickel-base alloy which was developed for service at elevated temperatures. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-168. Producer or source: Special Metals Corporation.

UDIMET 600

Alloy Digest ◽  
1963 ◽  
Vol 12 (6) ◽  
Keyword(s):  
Mechanical Properties ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
High Temperatures ◽  
Base Alloy ◽  
Heat Treating ◽  
Nickel Base Alloy ◽  
Nickel Base

Abstract UDIMET 600 is a vacuum-induction melted nickel-base alloy having excellent mechanical properties at high temperatures. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-44. Producer or source: Kelsey-Hayes Company. Originally published October 1958, revised June 1963.

NIMONIC 90

Alloy Digest ◽  
1961 ◽  
Vol 10 (12) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Base Alloy ◽  
Heat Treating ◽  
Nickel Base Alloy ◽  
Temperature Performance ◽  
Temperature Levels ◽  
Nickel Base

Abstract NIMONIC 90 is a nickel-base alloy containing high percentages of chromium and cobalt with aluminum and titanium as hardening agents. It has strength at high temperature levels, and is highly resistant to scaling, oxidation, heat and corrosion. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-6. Producer or source: Henry Wiggin & Company Ltd. Originally published July 1953, revised December 1961.

COLMONOY No. 6

Alloy Digest ◽  
1963 ◽  
Vol 12 (1) ◽  
Keyword(s):  
Compressive Strength ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Base Alloy ◽  
Heat Treating ◽  
Nickel Base Alloy ◽  
High Carbon ◽  
Nickel Base

Abstract Colmonoy No. 6 is a high-carbon, nickel-base alloy recommended for hard facing parts to resist wear, corrosion, heat and galling. This datasheet provides information on composition, physical properties, hardness, elasticity, and compressive strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-78. Producer or source: Wall Colmonoy Corporation.

Sign in / Sign up

Export Citation Format

Share Document