CELANESE NYLON 1000, 1003

Alloy Digest ◽  
1989 ◽  
Vol 38 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Shear Strength ◽  
Injection Molding ◽  
Physical Properties ◽  
Tensile Properties ◽  
Nylon 6 ◽  
General Purpose

Abstract CELANESE NYLON 1000 is a general purpose Nylon 6/6 grade for injection molding. Nylon 1003 is a heat stabilized form of Nylon 1000, also for injection molding. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and shear strength as well as fracture toughness. Filing Code: P-8. Producer or source: Hoechst Celanese Corporation.

GLASS FIBER REINFORCED CELANESE NYLON 6/6

Alloy Digest ◽  
1990 ◽  
Vol 39 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Shear Strength ◽  
Injection Molding ◽  
Physical Properties ◽  
Glass Fiber ◽  
Tensile Properties ◽  
Nylon 6 ◽  
Fiber Reinforced ◽  
Glass Fiber Reinforced ◽  
Engineering Plastics

Abstract CELANESE nylons 1400, 1500, and 1600 are respectively 13, 33 and 43% glass fiber reinforced injection molding nylon 6/6 grades. Heat stabilized modifications (1403, 1503 and 1603) are also available. This datasheet provides information on physical properties, hardness, tensile properties, and shear strength as well as fracture toughness. Filing Code: Cp-6. Producer or source: Engineering Plastics Division, Hoechst Celanese Corporation.

UNS A02080

Alloy Digest ◽  
1988 ◽  
Vol 37 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
General Purpose ◽  
Sand Casting ◽  
Casting Alloy ◽  
Heat Treated

Abstract UNS No. A02080 is a heat-treatable casting alloy characterized by good castability, machinability and resistance to corrosion. It is produced by sand casting and is a general-purpose alloy recommended in both the as-cast and heat-treated conditions. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-286. Producer or source: Various aluminum companies.

ILZRO-12

Alloy Digest ◽  
1969 ◽  
Vol 18 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
General Purpose ◽  
Zinc Alloy ◽  
Copper Base ◽  
Foundry Alloy ◽  
Lower Material

Abstract ILZRO-12 is a zinc-base foundry alloy recommended for general purpose castings. It has economic advantages by virtue of lower material costs and a lower casting temperature than competitive copper-base alloys. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness, creep, and fatigue. It also includes information on casting, heat treating, machining, and joining. Filing Code: Zn-12. Producer or source: Zinc and zinc alloy mills and foundries.

ZAMAK-5

Alloy Digest ◽  
1992 ◽  
Vol 41 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Creep Resistance ◽  
Die Casting ◽  
Heat Treating ◽  
General Purpose ◽  
Casting Alloy

Abstract ZAMAK-5 has moderately greater hardness, strength and creep resistance than the most widely used general purpose zinc die casting alloy, ZAMAK 3 (See Alloy Digest Zn-1, September 1991). This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Zn-2. Producer or source: Noranda Sales Corporation. Originally published as Zamak-5, May 1954, revised February 1992.

FEDERATED F430

Alloy Digest ◽  
1977 ◽  
Vol 26 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
General Purpose ◽  
Sand Casting ◽  
Casting Alloy ◽  
Heat Treated

Abstract FEDERATED F430 is a heat-treatable aluminum-copper-silicon casting alloy with good castability, machinability and corrosion resistance. It is produced by sand casting and is a general-purpose alloy recommended in both the as-cast and heat-treated conditions. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-118. Producer or source: Federated Metals Corporation, ASARCO Inc.. Originally published September 1962, revised January 1977.

ALUMINUM 208.0

Alloy Digest ◽  
1975 ◽  
Vol 24 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
General Purpose ◽  
Sand Casting ◽  
Casting Alloy ◽  
Heat Treated

Abstract ALUMINUM 208.0 is a heat-treatable casting alloy characterized by good castability, machinability and resistance to corrosion. It is produced by sand casting and is a general-purpose alloy recommended in both the as-cast and heat-treated conditions. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-215. Producer or source: Various aluminum companies.

REM-CRU A-55

Alloy Digest ◽  
1957 ◽  
Vol 6 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Heat Treating ◽  
General Purpose ◽  
Temperature Performance

Abstract REM-CRU A-55 is the general purpose grade of unalloyed titanium for moderate to severe forming. (Formerly known as RC-55). This datasheet provides information on composition, physical properties, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness, creep, and fatigue. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ti-13. Producer or source: Rem-Cru Titanium Inc..

GRILON PMV-4H

Alloy Digest ◽  
1990 ◽  
Vol 39 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Injection Molding ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Temperatures ◽  
Ultra Violet ◽  
Nylon 6 ◽  
Ultra Violet Radiation ◽  
Violet Radiation

Abstract GRILON PMV-4H is a reinforced nylon 6 injection molding resin optimally stabilized against high temperatures and ultra violet radiation. This datasheet provides information on physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on casting. Filing Code: Cp-8. Producer or source: EMS-American Grilon Inc..

INCONEL ALLOY 725

Alloy Digest ◽  
1994 ◽  
Vol 43 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Inconel Alloy ◽  
Alloy 625

Abstract INCONEL ALLOY 725 is an age-hardenable alloy that displays high strength along with excellent ductility and toughness. Its corrosion resistance is comparable to alloy 625. Good flattening properties are exhibited in age-hardened tubing. This datasheet provides information on composition, physical properties, hardness, tensile properties, and shear strength as well as fracture toughness. It also includes information on corrosion resistance as well as heat treating and machining. Filing Code: Ni-445. Producer or source: Inco Alloys International Inc.

ULTEM 6100, ULTEM 6200, ULTEM 6202

Alloy Digest ◽  
1990 ◽  
Vol 39 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Temperature Materials ◽  
Electrical Components

Abstract ULTEM 6100 and 6200 are glass reinforced and ULTEM 6202 is a mineral filled copolymer resin. For properties of the unreinforced resin, ULTEM 6000, see Alloy Digest P-27, June 1991. These are high temperature materials that are particularly suitable for military electrical components which must survive 200 C testing. This datasheet provides information on physical properties, hardness, tensile properties, and compressive and shear strength as well as fracture toughness. It also includes information on corrosion resistance. Filing Code: Cp-16. Producer or source: G. E. Plastics.

Sign in / Sign up

Export Citation Format

Share Document