ILZRO-12

Alloy Digest ◽  
1969 ◽  
Vol 18 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
General Purpose ◽  
Zinc Alloy ◽  
Copper Base ◽  
Foundry Alloy ◽  
Lower Material

Abstract ILZRO-12 is a zinc-base foundry alloy recommended for general purpose castings. It has economic advantages by virtue of lower material costs and a lower casting temperature than competitive copper-base alloys. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness, creep, and fatigue. It also includes information on casting, heat treating, machining, and joining. Filing Code: Zn-12. Producer or source: Zinc and zinc alloy mills and foundries.

UNS A02080

Alloy Digest ◽  
1988 ◽  
Vol 37 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
General Purpose ◽  
Sand Casting ◽  
Casting Alloy ◽  
Heat Treated

Abstract UNS No. A02080 is a heat-treatable casting alloy characterized by good castability, machinability and resistance to corrosion. It is produced by sand casting and is a general-purpose alloy recommended in both the as-cast and heat-treated conditions. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-286. Producer or source: Various aluminum companies.

ZAMAK-5

Alloy Digest ◽  
1992 ◽  
Vol 41 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Creep Resistance ◽  
Die Casting ◽  
Heat Treating ◽  
General Purpose ◽  
Casting Alloy

Abstract ZAMAK-5 has moderately greater hardness, strength and creep resistance than the most widely used general purpose zinc die casting alloy, ZAMAK 3 (See Alloy Digest Zn-1, September 1991). This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Zn-2. Producer or source: Noranda Sales Corporation. Originally published as Zamak-5, May 1954, revised February 1992.

BOHNALITE W-6

Alloy Digest ◽  
1956 ◽  
Vol 5 (12) ◽  
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
General Purpose ◽  
Foundry Alloy

Abstract BOHNALITE W-6 is a general purpose foundry alloy moderately responsive to heat treatment. It has excellent casting characteristics and good mechanical properties. This datasheet provides information on composition, physical properties, hardness, tensile properties, and compressive and shear strength as well as fatigue. It also includes information on heat treating, machining, and joining. Filing Code: Al-46. Producer or source: Bohn Aluminum & Brass Corporation.

FEDERATED F430

Alloy Digest ◽  
1977 ◽  
Vol 26 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
General Purpose ◽  
Sand Casting ◽  
Casting Alloy ◽  
Heat Treated

Abstract FEDERATED F430 is a heat-treatable aluminum-copper-silicon casting alloy with good castability, machinability and corrosion resistance. It is produced by sand casting and is a general-purpose alloy recommended in both the as-cast and heat-treated conditions. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-118. Producer or source: Federated Metals Corporation, ASARCO Inc.. Originally published September 1962, revised January 1977.

ALUMINUM 208.0

Alloy Digest ◽  
1975 ◽  
Vol 24 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
General Purpose ◽  
Sand Casting ◽  
Casting Alloy ◽  
Heat Treated

Abstract ALUMINUM 208.0 is a heat-treatable casting alloy characterized by good castability, machinability and resistance to corrosion. It is produced by sand casting and is a general-purpose alloy recommended in both the as-cast and heat-treated conditions. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-215. Producer or source: Various aluminum companies.

REM-CRU A-55

Alloy Digest ◽  
1957 ◽  
Vol 6 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Heat Treating ◽  
General Purpose ◽  
Temperature Performance

Abstract REM-CRU A-55 is the general purpose grade of unalloyed titanium for moderate to severe forming. (Formerly known as RC-55). This datasheet provides information on composition, physical properties, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness, creep, and fatigue. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ti-13. Producer or source: Rem-Cru Titanium Inc..

TG 12 ZINC ALLOY

Alloy Digest ◽  
1981 ◽  
Vol 30 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Tensile Strength ◽  
Shear Strength ◽  
Physical Properties ◽  
Heat Treating ◽  
General Purpose ◽  
Zinc Alloy ◽  
Permanent Mold ◽  
Die Cast ◽  
Malleable Iron

Abstract Tg-12 Zinc Alloy is the general-purpose, zinc-aluminum-copper foundry alloy. It can be sand, permanent-mold or die cast, has a modest cost and a tensile strength suitable for many applications where bronze and cast or malleable iron were traditionally used. Tg-12 is extremely resistant to galling, has natural lubricity and is thus well suited to lubricated bearing and bushing applications. Tg-12 is particularly well suited to liquid and gas-pressure applications. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness and fatigue. It also includes information on casting, forming, heat treating, machining, and surface treatment. Filing Code: Zn-37. Producer or source: Texasgulf Inc..

UNS Z33520

Alloy Digest ◽  
1988 ◽  
Vol 37 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Base Alloy ◽  
Die Casting ◽  
Heat Treating ◽  
Zinc Alloy ◽  
Casting Alloy

Abstract UNS Z33520 is a zinc-base alloy containing about 4% aluminum. It has no intentionally added copper. It is a relatively ductile (bendable and shapable) die casting alloy. This datasheet provides information on composition, physical properties, hardness, tensile properties, and compressive and shear strength as well as fracture toughness. It also includes information on corrosion resistance as well as casting, forming, heat treating, machining, and joining. Filing Code: Zn-45. Producer or source: Zinc alloy producers.

INCONEL ALLOY 725

Alloy Digest ◽  
1994 ◽  
Vol 43 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Inconel Alloy ◽  
Alloy 625

Abstract INCONEL ALLOY 725 is an age-hardenable alloy that displays high strength along with excellent ductility and toughness. Its corrosion resistance is comparable to alloy 625. Good flattening properties are exhibited in age-hardened tubing. This datasheet provides information on composition, physical properties, hardness, tensile properties, and shear strength as well as fracture toughness. It also includes information on corrosion resistance as well as heat treating and machining. Filing Code: Ni-445. Producer or source: Inco Alloys International Inc.

MUNTZ METAL

Alloy Digest ◽  
1955 ◽  
Vol 4 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Zinc Alloy ◽  
Good Strength ◽  
Copper Zinc

Abstract MUNTZ METAL is a 60-40 copper-zinc alloy having good strength but low ductility. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: Cu-25. Producer or source: Copper alloy mills.

Sign in / Sign up

Export Citation Format

Share Document