NICKEL-COPPER-COLUMBIUM STEEL

Alloy Digest ◽  
1971 ◽  
Vol 20 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Low Temperature ◽  
Heat Treating ◽  
Section Thickness ◽  
Aged Condition ◽  
International Nickel Company ◽  
Temperature Performance ◽  
Nickel Copper ◽  
Hot Rolled

Abstract Nickel-Copper-Columbium Steel is used in the hot-rolled and aged condition and develops yield strengths in the range 75,000 to 100,000 psi, depending on alloy content and section thickness. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on low temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-263. Producer or source: International Nickel Company Inc..

YOLOY-S

Alloy Digest ◽  
1958 ◽  
Vol 7 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Low Temperature ◽  
Physical Properties ◽  
Copper Alloy ◽  
Atmospheric Corrosion ◽  
Heat Treating ◽  
Temperature Performance ◽  
Nickel Copper ◽  
Hot Rolled

Abstract Yoloy-S is a nickel-copper alloy steel recommended for use where yield points higher than 50,000 psi are required, together with good formability as hot rolled and greatly increased resistance to atmospheric corrosion. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on low temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-74. Producer or source: Youngstown Sheet and Tube Company.

MONEL

Alloy Digest ◽  
1955 ◽  
Vol 4 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Copper Alloy ◽  
High Strength ◽  
Heat Treating ◽  
General Purpose ◽  
International Nickel Company ◽  
Temperature Performance ◽  
Nickel Copper ◽  
Cold Worked

Abstract MONEL is a general purpose nickel-copper alloy having excellent combination of high strength, ductility and corrosion resistance. Cold-worked, welded and cast forms behave substantially the same under corrosive conditions. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-21. Producer or source: The International Nickel Company Inc..

R MONEL

Alloy Digest ◽  
1957 ◽  
Vol 6 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Copper Alloy ◽  
High Strength ◽  
Heat Treating ◽  
General Purpose ◽  
International Nickel Company ◽  
Temperature Performance ◽  
Nickel Copper

Abstract R MONEL is a general purpose nickel-copper alloy having excellent combination of high strength, ductility and corrosion resistance. It is the free-cutting grade of Monel. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on high temperature performance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-34. Producer or source: The International Nickel Company Inc..

K MONEL

Alloy Digest ◽  
1955 ◽  
Vol 4 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Corrosion Resistant ◽  
International Nickel Company ◽  
Temperature Performance ◽  
Nickel Copper

Abstract K MONEL is a corrosion-resistant wrought alloy of nickel, copper and aluminum. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-17. Producer or source: The International Nickel Company Inc..

YOLOY

Alloy Digest ◽  
1953 ◽  
Vol 2 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Carbon Steel ◽  
Low Temperature ◽  
High Strength ◽  
Heat Treating ◽  
High Ductility ◽  
Good Corrosion Resistance ◽  
Temperature Performance ◽  
Nickel Copper

Abstract YOLOY is a high strength-low alloy, nickel-copper steel combining excellent formability with good corrosion resistance to the atmosphere. It has high ductility and excellent weldability. Its abrasion resistance is about 2 or 3 times that of carbon steel of similar strength. YOLOY is marketed in three different grades, namely, Grade ACR, Grade HSX and Grade HS. This datasheet provides information on composition, hardness, and tensile properties as well as fracture toughness and fatigue. It also includes information on low temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-5. Producer or source: Youngstown Sheet and Tube Company.

DURANICKEL ALLOY 301

Alloy Digest ◽  
1963 ◽  
Vol 12 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Heat Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
High Strength ◽  
Heat Treating ◽  
International Nickel Company ◽  
Temperature Performance

Abstract DURANICKEL Alloy 301 is a wrought, age-hardenable nickel alloy having high strength, high corrosion and heat resistance. It is recommended for springs, diaphrams, bearings, pump and valve parts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-83. Producer or source: The International Nickel Company Inc..

AMPCOLOY 495

Alloy Digest ◽  
1966 ◽  
Vol 15 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Low Temperature ◽  
Physical Properties ◽  
High Strength ◽  
Heat Treating ◽  
Aluminum Bronze ◽  
High Manganese ◽  
Temperature Performance

Abstract AMPCOLOY 495 is a high manganese type of aluminum bronze recommended where high strength and corrosion resistance are required along with good weldability. It is recommended for marine equipment and ship propellers. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness, creep, and fatigue. It also includes information on low temperature performance and corrosion resistance as well as casting, forming, heat treating, machining, and joining. Filing Code: Cu-171. Producer or source: Ampco Metal Inc..

BOFORS 2RM2

Alloy Digest ◽  
1965 ◽  
Vol 14 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Low Temperature ◽  
Mechanical Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Cast Steel ◽  
Heat Treating ◽  
High Mechanical Strength ◽  
Temperature Performance

Abstract BOFORS 2RM2 is a hardenable stainless cast steel having good weldability, high mechanical strength and improved corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on low temperature performance and corrosion resistance as well as casting, forming, heat treating, machining, and joining. Filing Code: SS-169. Producer or source: Aktiebolaget Bofors.

AWHF STEEL

Alloy Digest ◽  
1972 ◽  
Vol 21 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Low Temperature ◽  
Physical Properties ◽  
Heat Treating ◽  
Steel Company ◽  
Cold Forming ◽  
Temperature Performance ◽  
Minimum Yield

Abstract AWHF STEEL is a high-formability steel produced regularly at minimum yield strengths of 45,000 and 50,000 psi and for special applications at 55,000 and 60,000 psi. It is recommended for difficult cold-forming applications that involve bending or drawing and it has good weldability. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on low temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-275. Producer or source: Alan Wood Steel Company.

AISI TYPE 302

Alloy Digest ◽  
1988 ◽  
Vol 37 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Low Temperature ◽  
High Resistance ◽  
Heat Treating ◽  
General Purpose ◽  
Steel Mills ◽  
Temperature Performance ◽  
Aisi Type

Abstract AISI Type 302 is a general purpose austenitic chromium-nickel stainless steel. It has high resistance to corrosion and heat. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on low temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-99. Producer or source: Stainless steel mills. Originally published January 1960, revised September 1988.

Sign in / Sign up

Export Citation Format

Share Document