YOLOY-S

Alloy Digest ◽  
1958 ◽  
Vol 7 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Low Temperature ◽  
Physical Properties ◽  
Copper Alloy ◽  
Atmospheric Corrosion ◽  
Heat Treating ◽  
Temperature Performance ◽  
Nickel Copper ◽  
Hot Rolled

Abstract Yoloy-S is a nickel-copper alloy steel recommended for use where yield points higher than 50,000 psi are required, together with good formability as hot rolled and greatly increased resistance to atmospheric corrosion. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on low temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-74. Producer or source: Youngstown Sheet and Tube Company.

NICKEL-COPPER-COLUMBIUM STEEL

Alloy Digest ◽  
1971 ◽  
Vol 20 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Low Temperature ◽  
Heat Treating ◽  
Section Thickness ◽  
Aged Condition ◽  
International Nickel Company ◽  
Temperature Performance ◽  
Nickel Copper ◽  
Hot Rolled

Abstract Nickel-Copper-Columbium Steel is used in the hot-rolled and aged condition and develops yield strengths in the range 75,000 to 100,000 psi, depending on alloy content and section thickness. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on low temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-263. Producer or source: International Nickel Company Inc..

COPPER ALLOY No. 101

Alloy Digest ◽  
1974 ◽  
Vol 23 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Low Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Temperature Performance

Abstract Copper No. 101 is a wrought oxygen-free, high-conductivity copper for electrical and electronic applications. Its trade designation is OFE (Oxygen Free Electronic) copper. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness and fatigue. It also includes information on low temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Cu-278. Producer or source: Copper and copper alloy mills.

MONEL ALLOY 400

Alloy Digest ◽  
1964 ◽  
Vol 13 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Copper Alloy ◽  
High Strength ◽  
Heat Treating ◽  
General Purpose ◽  
Temperature Performance ◽  
Nickel Copper

Abstract MONEL alloy 400 is a general purpose nickel-copper alloy having excellent combination of high strength, ductility, and corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-93. Producer or source: Huntington Alloy Products Division.

COPPER ALLOY No. 655

Alloy Digest ◽  
1972 ◽  
Vol 21 (1) ◽  
Keyword(s):  
Mechanical Properties ◽  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Low Temperature ◽  
Physical Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Temperature Performance ◽  
Mechanical Properties And Corrosion

Abstract COPPER ALLOY No. 655 is a high-silicon copper alloy which has good mechanical properties and corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness and creep. It also includes information on low temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-248. Producer or source: Copper and copper alloy mills.

MONEL ALLOY R-405

Alloy Digest ◽  
1963 ◽  
Vol 12 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Nickel Copper

Abstract MONEL alloy R-405 is a machining grade of nickel-copper alloy that combines toughness, strength and corrosion resistance of MONEL alloy 400 with excellent machinability. The alloy is designed especially for use in automatic screw machines. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-79. Producer or source: Huntington Alloy Products Division.

COPPER ALLOY No. 230

Alloy Digest ◽  
1972 ◽  
Vol 21 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Single Phase ◽  
Heat Treating ◽  
Temperature Performance

Abstract COPPER ALLOY No. 230 is a single-phase brass containing 15% zinc which is the most widely used of the low zinc brasses. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness and creep. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-252. Producer or source: Brass mills.

COPPER ALLOY No. 510

Alloy Digest ◽  
1971 ◽  
Vol 20 (8) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Low Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Fatigue Properties ◽  
Temperature Performance ◽  
Tin Bronze

Abstract COPPER ALLOY No. 510 is a tin bronze containing about 0.25% phosphorus. It combines high strength and toughness with excellent fatigue properties. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep and fatigue. It also includes information on low temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-238. Producer or source: Brass mills.

AMPCOLOY 495

Alloy Digest ◽  
1966 ◽  
Vol 15 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Low Temperature ◽  
Physical Properties ◽  
High Strength ◽  
Heat Treating ◽  
Aluminum Bronze ◽  
High Manganese ◽  
Temperature Performance

Abstract AMPCOLOY 495 is a high manganese type of aluminum bronze recommended where high strength and corrosion resistance are required along with good weldability. It is recommended for marine equipment and ship propellers. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness, creep, and fatigue. It also includes information on low temperature performance and corrosion resistance as well as casting, forming, heat treating, machining, and joining. Filing Code: Cu-171. Producer or source: Ampco Metal Inc..

BOFORS 2RM2

Alloy Digest ◽  
1965 ◽  
Vol 14 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Low Temperature ◽  
Mechanical Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Cast Steel ◽  
Heat Treating ◽  
High Mechanical Strength ◽  
Temperature Performance

Abstract BOFORS 2RM2 is a hardenable stainless cast steel having good weldability, high mechanical strength and improved corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on low temperature performance and corrosion resistance as well as casting, forming, heat treating, machining, and joining. Filing Code: SS-169. Producer or source: Aktiebolaget Bofors.

AWHF STEEL

Alloy Digest ◽  
1972 ◽  
Vol 21 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Low Temperature ◽  
Physical Properties ◽  
Heat Treating ◽  
Steel Company ◽  
Cold Forming ◽  
Temperature Performance ◽  
Minimum Yield

Abstract AWHF STEEL is a high-formability steel produced regularly at minimum yield strengths of 45,000 and 50,000 psi and for special applications at 55,000 and 60,000 psi. It is recommended for difficult cold-forming applications that involve bending or drawing and it has good weldability. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on low temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-275. Producer or source: Alan Wood Steel Company.

Sign in / Sign up

Export Citation Format

Share Document