UNS H51320

Alloy Digest ◽  
1986 ◽  
Vol 35 (3) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Chromium Content ◽  
Heat Treating ◽  
Strength Level ◽  
Steel Mills ◽  
Strength And Toughness

Abstract UNS No. H51321 is a medium-hardenability, through-hardening steel of low (0.75-1.00%) chromium content. It is recommended for uses where moderate strength and toughness are satisfactory. It may be used in the unhardened condition or after quenching in water or oil followed by tempering to the desired strength level. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-416. Producer or source: Alloy steel mills and foundries.

AISI 5132

Alloy Digest ◽  
1978 ◽  
Vol 27 (9) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Chromium Content ◽  
Heat Treating ◽  
Strength Level ◽  
Steel Mills ◽  
Strength And Toughness

Abstract AISI 5132 is a medium-hardenability, through-hardening steel of low (0.75-1.00%) chromium content. It is recommended for uses where moderate strength and toughness are satisfactory. It may be used in the unhardened condition or after quenching in water or oil followed by tempering to the desired strength level. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-350. Producer or source: Alloy steel mills and foundries.

SAE 8642

Alloy Digest ◽  
1981 ◽  
Vol 30 (7) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Alloy Steel ◽  
High Strength ◽  
Heat Treating ◽  
Steel Mills ◽  
Wide Range ◽  
Strength And Toughness

Abstract SAE 8642 is a triple-alloy steel that can be hardened by austenitizing and quenching in oil. This steel has moderate hardenability with relative high strength and toughness, especially in the quenched-and-tempered condition. It is used in a wide range of components, parts and tools; examples are bolts, shafts, gears, wrenches, axles and housings. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-382. Producer or source: Alloy steel mills and foundries.

AISI 5130

Alloy Digest ◽  
1974 ◽  
Vol 23 (1) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Heat Treating ◽  
Steel Mills ◽  
Strength And Toughness

Abstract AISI 5130 is a low-chromium through-hardening steel for applications where medium hardenability, strength and toughness are sufficient. It may be used in the unhardened condition or after quenching in oil or water followed by tempering. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-300. Producer or source: Alloy steel mills and foundries.

AISI 5135

Alloy Digest ◽  
1976 ◽  
Vol 25 (8) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Heat Treating ◽  
Steel Mills

Abstract AISI 5135 is a low-alloy, through-hardening steel containing nominally 0.95% chromium. It is recommended for applications where medium hardenability, moderate strength and low-to-moderate toughness are sufficient. It may be used in the unhardened (annealed, as-rolled, or normalized) condition or after quenching in oil followed by tempering. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-323. Producer or source: Alloy steel mills and foundries.

SAE 4032

Alloy Digest ◽  
1975 ◽  
Vol 24 (9) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Automobile Industry ◽  
Temper Embrittlement ◽  
Heat Treating ◽  
Steel Mills

Abstract SAE 4032 is an alloy steel used extensively in the automobile industry. It combines moderate strength with good toughness in the quenched and tempered condition because it is relatively free from temper embrittlement when tempered in the range 850-1100 F. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-319. Producer or source: Alloy steel mills and foundries.

SAE 1345

Alloy Digest ◽  
1987 ◽  
Vol 36 (5) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Heat Treating ◽  
Hand Tools ◽  
Manganese Alloy ◽  
Steel Mills ◽  
Wide Range

Abstract SAE 1345 is a through-hardening, manganese alloy steel with intermediate hardenability. It is most commonly used where good strength is needed but low-to-medium toughness is sufficient. Its wide range of uses in tools and machinery includes hand tools, gears, shafts, bolts and housings. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-425. Producer or source: Alloy steel mills and foundries.

SAE 4427

Alloy Digest ◽  
1974 ◽  
Vol 23 (6) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Heat Treating ◽  
Steel Mills ◽  
Molybdenum Steel

Abstract SAE 4427 is a 0.5% molybdenum steel designed for carburizing applications and it is also useful for general purposes. It is recommended for case-hardened gears, pinions, shafts and similar components. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-306. Producer or source: Alloy steel mills and foundries.

AISI 8627

Alloy Digest ◽  
1980 ◽  
Vol 29 (12) ◽  
Keyword(s):  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Heat Treating ◽  
Heavy Duty ◽  
Good Strength ◽  
Steel Mills ◽  
Hot Rolled ◽  
Strength And Toughness

Abstract AISI 8627 is an alloy steel of moderate-to-good hardenability for carburizing and other applications. When carburized, its core has good strength and toughness, and it is recommended for heavy-duty applications such as gears, shafts, cams, and machinery parts. Also, it can be used in the hot-rolled, normalized or water-quenched-and-tempered condition without carburizing. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-379. Producer or source: Alloy steel mills and foundries.

AISI 5117

Alloy Digest ◽  
1980 ◽  
Vol 29 (9) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Heat Treating ◽  
Chromium Steel ◽  
Low Carbon ◽  
Steel Mills ◽  
Medium Strength

Abstract AISI 5117 is a low-carbon, low-chromium steel for carburizing and other uses. It is recommended for carburizing applications where it is sufficient to have a low-hardenability core of medium strength and toughness combined with a hard, wear-resistant carburized case. It is used without carburizing in the as-rolled, annealed, normalized or quenched-and-tempered condition. It is suitable for use in the automotive, farm-machinery and many other industries. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-376. Producer or source: Alloy steel mills and foundries.

SAE 8115

Alloy Digest ◽  
1973 ◽  
Vol 22 (8) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Heat Treating ◽  
Low Carbon ◽  
Nickel Chromium ◽  
Steel Mills ◽  
Medium Strength

Abstract SAE 8115 is a low-carbon nickel-chromium-molybdenum carburizing steel recommended for applications where a core of medium strength and toughness combined with a wear-resistant carburized case is sufficient. It has medium hardenability and can be used without carburizing. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-292. Producer or source: Alloy steel mills and foundries.

Sign in / Sign up

Export Citation Format

Share Document