XABO 355

Alloy Digest ◽  
2017 ◽  
Vol 66 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Yield Strength ◽  
Physical Properties ◽  
Flat Plate ◽  
Structural Steel ◽  
Tensile Properties ◽  
Impact Test ◽  
Steel Grade ◽  
Minimum Yield

Abstract XABO 355 (minimum yield strength of 355 MPa, or 51 ksi, for thicknesses up to 35 mm, or 1.4 in.) is a thermomechanically rolled structural steel. This datasheet applies to thermomechanically rolled flat plate products in thicknesses up to 60 mm (2.4 in.). This steel grade is distinguished by testing by notch-bar impact test to –20 deg C (-4 deg F) minimum. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on forming and joining. Filing Code: SA-777. Producer or source: ThyssenKrupp Steel Europe AG.

XABO 460

Alloy Digest ◽  
2017 ◽  
Vol 66 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Yield Strength ◽  
Physical Properties ◽  
Flat Plate ◽  
Structural Steel ◽  
Tensile Properties ◽  
Impact Test ◽  
Steel Grade ◽  
Minimum Yield

Abstract XABO 460 (minimum yield strength of 460 MPa, or 67 ksi, for thicknesses up to 35 mm, or 1.4 in.) is a thermomechanically rolled structural steel. This datasheet applies to thermomechanically rolled flat plate products in thicknesses up to 60 mm (2.4 in.). This steel grade is distinguished by testing by notch-bar impact test to –20 deg C (-4 deg F) minimum. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on forming and joining. Filing Code: SA-778. Producer or source: ThyssenKrupp Steel Europe AG.

XABO 500

Alloy Digest ◽  
2017 ◽  
Vol 66 (6) ◽  
Keyword(s):  
Yield Strength ◽  
Physical Properties ◽  
Flat Plate ◽  
Structural Steel ◽  
Tensile Properties ◽  
Impact Test ◽  
Steel Grade ◽  
Minimum Yield

Abstract XABO 500 (minimum yield strength of 500 MPa, or 73 ksi, for thicknesses up to 16 mm, or 0.6 in.) is a thermomechanically rolled structural steel. This datasheet applies to thermomechanically rolled flat plate products in thicknesses up to 60 mm (2.4 in.). This steel grade is distinguished by testing by notch-bar impact test to –20 deg C (-4 deg F) minimum. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on forming and joining. Filing Code: SA-786. Producer or source: ThyssenKrupp Steel Europe AG.

STRENX 700

Alloy Digest ◽  
2017 ◽  
Vol 66 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Yield Strength ◽  
Physical Properties ◽  
Structural Steel ◽  
Tensile Properties ◽  
High Strength ◽  
Load Bearing ◽  
Minimum Yield

Abstract Strenx 700 is a high-strength structural steel with a minimum yield strength of 650–700 MPa (94–102 ksi) depending on thickness. Strenx 700 meets the requirements of EN 10 025-6 for the S690 grade and thicknesses. Typical applications include demanding load-bearing structures. This datasheet provides information on composition, physical properties, and tensile properties as well as fracture toughness. It also includes information on surface qualities as well as forming, machining, and joining. Filing Code: SA-779. Producer or source: SSAB Swedish Steel Inc..

DILLIMAX 690

Alloy Digest ◽  
2012 ◽  
Vol 61 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Yield Strength ◽  
Physical Properties ◽  
Structural Steel ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Fine Grained ◽  
Minimum Yield

Abstract Dillimax 550 is a high-strength quenched and tempered, fine-grained structural steel with a minimum yield strength of 690 MPa (100 ksi). Plate is delivered in three qualities: basic, tough, and extra tough. This datasheet provides information on composition, physical properties, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, and joining. Filing Code: SA-652. Producer or source: Dillinger Hütte GTS.

DILLIMAX 500

Alloy Digest ◽  
2012 ◽  
Vol 61 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Yield Strength ◽  
Physical Properties ◽  
Structural Steel ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Fine Grained ◽  
High Toughness ◽  
Minimum Yield

Abstract Dillimax 500 is a high-strength quenched and tempered, fine-grained structural steel with a minimum yield strength of 500 MPa (72 ksi). Plate is delivered in three qualities: basic, high toughness, and extra tough. This datasheet provides information on composition, physical properties, and tensile properties as well as fracture toughness. It also includes information on surface qualities as well as forming, heat treating, and joining. Filing Code: SA-645. Producer or source: Dillinger Hütte GTS.

DILLIMAX 965

Alloy Digest ◽  
2012 ◽  
Vol 61 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Yield Strength ◽  
Physical Properties ◽  
Structural Steel ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Fine Grained ◽  
Minimum Yield

Abstract Dillimax 965 is a high-strength, quenched and tempered, fine-grained structural steel with minimum yield strength of 965 MPa (140 ksi). Plate is delivered in three qualities; basic, tough, and extra tough. This datasheet provides information on composition, physical properties, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, and joining. Filing Code: SA-659. Producer or source: Dillinger Hütte GTS.

STRENX 600MC

Alloy Digest ◽  
2016 ◽  
Vol 65 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Yield Strength ◽  
Physical Properties ◽  
Structural Steel ◽  
Tensile Properties ◽  
Bend Strength ◽  
Cold Forming ◽  
Hot Rolled ◽  
Minimum Yield

Abstract Strenx 600MC is a hot-rolled, structural steel made for cold forming, with minimum yield strength of 600 MPa (87 ksi) for stronger and lighter structures. This alloy meets or exceeds the requirements of S600MC in EN 10149-2. This datasheet provides information on composition, physical properties, tensile properties, and bend strength as well as fracture toughness. It also includes information on forming, machining, and joining. Filing Code: SA-756. Producer or source: SSAB Swedish Steel Inc..

STRENX 1100 MC

Alloy Digest ◽  
2016 ◽  
Vol 65 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Yield Strength ◽  
Physical Properties ◽  
Structural Steel ◽  
Tensile Properties ◽  
High Strength ◽  
Bend Strength ◽  
Cold Forming ◽  
Hot Rolled ◽  
Minimum Yield

Abstract Strenx 1100 MC is a high-strength hot-rolled structural steel made for cold forming, with minimum yield strength of 1100 MPa (160 ksi) for stronger and lighter structures. This alloy meets or exceeds the requirements of S1100 MC in EN 10149-2. This datasheet provides information on composition, physical properties, tensile properties, and bend strength as well as fracture toughness. It also includes information on surface qualities as well as forming, machining, and joining. Filing Code: SA-773. Producer or source: SSAB Swedish Steel Inc..

BISALLOY STRUCTURAL 80

Alloy Digest ◽  
2019 ◽  
Vol 68 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Low Temperature ◽  
Yield Strength ◽  
Physical Properties ◽  
Structural Steel ◽  
Tensile Properties ◽  
High Strength ◽  
Low Carbon ◽  
Temperature Fracture ◽  
Minimum Yield

Abstract Bisalloy Structural 80 steel (80 ksi minimum yield strength) is a low-carbon, low-alloy, high-strength structural steel exhibiting excellent cold formability and low-temperature fracture toughness. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on forming and joining. Filing Code: SA-842. Producer or source: Bisalloy Steels Group Limited.

STRENX 700MC

Alloy Digest ◽  
2016 ◽  
Vol 65 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Yield Strength ◽  
Physical Properties ◽  
Structural Steel ◽  
Tensile Properties ◽  
Bend Strength ◽  
Cold Forming ◽  
Hot Rolled ◽  
Minimum Yield

Abstract Strenx 700MC is a hot-rolled structural steel made for cold forming, with minimum yield strength of 700 MPa (102 ksi) for stronger and lighter structures. This datasheet provides information on composition, physical properties, tensile properties, and bend strength as well as fracture toughness. It also includes information on forming, machining, and joining. Filing Code: SA-763. Producer or source: SSAB Swedish Steel Inc..

Sign in / Sign up

Export Citation Format

Share Document