AUBERT & DUVAL CNS (35NiCr6)

Alloy Digest ◽  
2021 ◽  
Vol 70 (12) ◽  
Keyword(s):  
Physical Properties ◽  
Carbon Content ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Medium Carbon ◽  
Small Section ◽  
Nickel Chromium ◽  
Content Classification ◽  
Section Size

Abstract Aubert and Duval CNS (35NiCr6) is a medium-carbon, nickel-chromium, direct hardening alloy steel. It is a medium hardenability steel in the 0.30 to 0.37 mean carbon content classification. This steel is frequently used for water-quenched parts of moderate section size and for oil-quenched parts of small section size. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on casting. Filing Code: SA-878. Producer or source: Aubert & Duval S.A. (a member of the Eramet Group).

LUCEFIN GROUP 34CrMo4 (1.7220), 34CrMoS4 (1.7226)

Alloy Digest ◽  
2020 ◽  
Vol 69 (6) ◽  
Keyword(s):  
Physical Properties ◽  
Carbon Content ◽  
Induction Hardening ◽  
High Strength ◽  
Medium Carbon ◽  
Small Section ◽  
Content Classification ◽  
Section Size ◽  
Alloy Steels ◽  
Strength And Toughness

Abstract Lucefin Group 34CrMo4 and 34CrMoS4 are medium-carbon, 1% chromium-molybdenum direct hardening alloy steels that are also suitable for flame and induction hardening, and nitriding. These steels are medium hardenability steels in the 0.30 to 0.37 mean carbon content classification. They are used for water-quenched parts of moderate section size and for oil-quenched parts of small section size. In general, they are used for parts requiring high strength and toughness. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, machining, and joining. Filing Code: SA-863. Producer or source: Lucefin S.p.A.

LUCEFIN GROUP 37Cr4 (1.7034), 37CrS4 (1.7038)

Alloy Digest ◽  
2020 ◽  
Vol 69 (5) ◽  
Keyword(s):  
High Temperature ◽  
Physical Properties ◽  
Carbon Content ◽  
Induction Hardening ◽  
Medium Carbon ◽  
Small Section ◽  
Temperature Performance ◽  
Content Classification ◽  
Section Size ◽  
Alloy Steels

Abstract Lucefin Group 37Cr4 and 37CrS4 are medium-carbon, 1% chromium, direct hardening alloy steels that are also suitable for flame and induction hardening. These steels are low hardenability steels in the 0.30 to 0.37 mean carbon content classification. They are used for water-quenched parts of moderate section size and for oil-quenched parts of small section size. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on high temperature performance as well as forming, machining, and joining. Filing Code: SA-862. Producer or source: Lucefin S.p.A.

CEN 34Cr4 (1.7033), 34CrS4 (1.7037)

Alloy Digest ◽  
2021 ◽  
Vol 70 (6) ◽  
Keyword(s):  
Physical Properties ◽  
Carbon Content ◽  
Tensile Properties ◽  
Induction Hardening ◽  
Heat Treating ◽  
Medium Carbon ◽  
European Committee ◽  
Content Classification ◽  
Section Size ◽  
Alloy Steels

Abstract CEN 34Cr4 and 34CrS4 are medium-carbon, 1% chromium, direct hardening alloy steels that are also suitable for flame and induction hardening. These steels are low hardenability steels in the 0.30 to 0.37 mean carbon content classification. They are used for water-quenched parts of moderate section size and for oil-quenched parts of small section size. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, and joining. Filing Code: SA-872. Producer or source: European Committee for Standardization.

AISI 9440

Alloy Digest ◽  
1958 ◽  
Vol 7 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Heat Treating ◽  
Medium Carbon ◽  
Nickel Chromium ◽  
Steel Mills ◽  
Temperature Performance

Abstract AISI 9440 is a medium carbon, nickel-chromium-molybdenum alloy steel of the oil hardening type. It has good hardenability and desirable toughness. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on low and high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: SA-77. Producer or source: Alloy steel mills and foundries.

AISI 8740

Alloy Digest ◽  
1954 ◽  
Vol 3 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Low Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Heat Treating ◽  
Medium Carbon ◽  
Nickel Chromium ◽  
Steel Mills ◽  
Temperature Performance

Abstract AISI 8740 is a medium-carbon, nickel, chromium, molybdenum alloy steel of the oil hardening type. It has good hardenability and desirable toughness. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on low temperature performance as well as forming, heat treating, machining, and joining. Filing Code: SA-21. Producer or source: Alloy steel mills and foundries.

CEN 46Cr2 (1.7006), 46CrS2 (1.7025)

Alloy Digest ◽  
2021 ◽  
Vol 70 (4) ◽  
Keyword(s):  
Physical Properties ◽  
Carbon Content ◽  
Tensile Properties ◽  
High Hardness ◽  
Induction Hardening ◽  
Heat Treating ◽  
Medium Carbon ◽  
European Committee ◽  
Content Classification ◽  
Alloy Steels

Abstract CEN 46Cr2 and 46CrS2 are medium-carbon, 0.5% chromium direct hardening alloy steels that are also suitable for flame or induction hardening. These steels are low hardenability steels in the 0.45 to 0.50 mean carbon content classification. In general, they are used for gears and other parts requiring high hardness as well as strength and toughness. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, and joining. Filing Code: SA-871. Producer or source: European Committee for Standardization.

CEN 38Cr2 (1.7003), 38CrS2 (1.7023)

Alloy Digest ◽  
2021 ◽  
Vol 70 (2) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Induction Hardening ◽  
Heat Treating ◽  
Medium Carbon ◽  
Small Section ◽  
European Committee ◽  
Section Size ◽  
Alloy Steels

Abstract CEN 38Cr2 and 38CrS2 are medium-carbon, 0.5% Cr direct hardening alloy steels that are also suitable for flame or induction hardening. These steels are low hardenability steels that are generally used for water-quenched parts of moderate section size and for oil-quenched parts of small section size. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: SA-868. Producer or source: European Committee for Standardization (CEN).

LUCEFIN GROUP 41Cr4 (1.7035), 41CrS4 (1.7039)

Alloy Digest ◽  
2020 ◽  
Vol 69 (02) ◽  
Keyword(s):  
Shear Strength ◽  
Physical Properties ◽  
Carbon Content ◽  
Tensile Properties ◽  
Induction Hardening ◽  
Heat Treating ◽  
Medium Size ◽  
Medium Carbon ◽  
Content Classification ◽  
Alloy Steels

Abstract Lucefin Group 41Cr4 and 41CrS4 are medium-carbon, 1% chromium, direct hardening alloy steels that are also suitable for flame and induction hardening. These steels are low hardenability steels in the 0.40 to 0.42 mean carbon content classification. They are used for small and medium size parts that require a higher degree of strength and toughness. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on forming, heat treating, machining, and joining. Filing Code: SA-860. Producer or source: Lucefin S.p.A..

AISI 1340

Alloy Digest ◽  
1969 ◽  
Vol 18 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Physical Properties ◽  
Carbon Content ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Heat Treating ◽  
Steel Mills

Abstract AISI 1340 is a carbon-manganese oil hardening steel with greater hardenability than the 1000 and 1100 steels of comparable carbon content, and with poorer machinability than the sulfurized 1100 steels. It is recommended for general engineering and machinery parts such as shafts, gears, axles, fasteners, rollers, etc. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: CS-30. Producer or source: Carbon and alloy steel mills.

UNS G81150

Alloy Digest ◽  
1990 ◽  
Vol 39 (11) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Heat Treating ◽  
Low Carbon ◽  
Wear Resistant ◽  
Nickel Chromium ◽  
Steel Mills ◽  
Medium Strength ◽  
Strength And Toughness

Abstract UNS G 81150 is a low-carbon nickel-chromium-molybdenum carburizing steel recommended for applications where a core of medium strength and toughness combined with a wear-resistant carburized case is sufficient. It has medium hardenability and can be used without carburizing. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: SA-453. Producer or source: Alloy steel mills and foundries.

Sign in / Sign up

Export Citation Format

Share Document