TIN BISMUTH 60-40

Alloy Digest ◽  
1982 ◽  
Vol 31 (11) ◽  
Keyword(s):  
Low Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Eutectic Alloy ◽  
Base Alloy ◽  
Heat Treating ◽  
Temperature Range

Abstract Tin-Bismuth 60-40 is a tin-base alloy that can be melted easily. It is a non-eutectic alloy and melts through the temperature range 281-338 F (138-170 C). It provides scientists, engineers and technicians with an easily castable material that is ready for use soon after it freezes; in addition, it can be recovered readily an recycled into new uses any number of times. Among its many uses are fusible mandrels for electroforming, low-temperature solder, holding parts for machining, dies for a wax patterns for investments casting and liquid scals for furnaces. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on casting, heat treating, machining, and joining. Filing Code: Sn-12. Producer or source: Low-melting alloy producers.

INDALLOY 281-338

Alloy Digest ◽  
1980 ◽  
Vol 29 (9) ◽  
Keyword(s):  
Low Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Eutectic Alloy ◽  
Investment Casting ◽  
Base Alloy ◽  
Heat Treating ◽  
Jet Engine ◽  
Temperature Range ◽  
Scientists And Engineers

Abstract INDALLOY 281-338 is a tin-base alloy that can be melted easily. It is non-eutectic alloy and melts through a temperature range of 281-338 F. It provides scientists and engineers with an easily castable material that is ready for use soon after it freezes; in addition, it can be recovered readily and recycled into new uses any number of times. Among its many uses are fusible mandrels for electroforming, proof casting in foundries, low-temperature solder, holding jet engine blades for machining and dies for wax patterns for investment casting. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on casting, heat treating, and machining. Filing Code: Sn-10. Producer or source: Indium Corporation of America.

BISMUTH-28.5Pb-14.5Sn-9Sb

Alloy Digest ◽  
1983 ◽  
Vol 32 (3) ◽  
Keyword(s):  
Low Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Melting Temperature ◽  
Eutectic Alloy ◽  
Sheet Steel ◽  
Heat Treating ◽  
Temperature Range ◽  
Silicon Sheet

Abstract Bismuth-28.5Pb-14.5Sn-9Sb is a bismuth-base non-eutectic alloy that melts over the low-temperature range of 218-440 F. Its controlled-shrinkage characteristics and low melting temperature make it a valuable industrial tool. It was developed and used originally for making punching dies to produce transformer laminations from silicon sheet steel. Now its many uses include filling blow holes in castings, anchoring dies and non-machinery parts, fixtures, jigs and hold-down bolts in concrete floors. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on casting, heat treating, and machining. Filing Code: Bi-30. Producer or source: Producers of low-melting alloys.

INDALLOY 217-440

Alloy Digest ◽  
1981 ◽  
Vol 30 (2) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Melting Temperature ◽  
Eutectic Alloy ◽  
Base Alloy ◽  
Heat Treating ◽  
Temperature Range ◽  
Moving Parts

Abstract INDALLOY 217-440 is a bismuth-base alloy that can be melted easily. It is a non-eutectic alloy that melts through a temperature range of 217-440 F. Its low melting temperature and controlled-shrinkage characteristics make it a valuable tool of industry for such applications as anchoring non-moving parts in machinery, filling blow holes in castings, split jaw chucks and anchoring hold-down bolts in concrete floors. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on casting, heat treating, and machining. Filing Code: Bi-22. Producer or source: Indium Corporation of America.

BELMONT ALLOY 2431

Alloy Digest ◽  
1979 ◽  
Vol 28 (6) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Eutectic Alloy ◽  
Precision Measurement ◽  
Base Alloy ◽  
Heat Treating ◽  
Temperature Range

Abstract BELMONT ALLOY 2431 is a bismuth-base alloy that can be melted easily. This non-eutectic alloy melts through the temperature range 160-190 F. It was originally developed as an ingot alloy and sold in a kit to be used by children for casting soldiers and other small objects. It has the unique properties of shrinking immediately upon solidification and growing back to zero in one hour, followed by additional growth. This shrinkage-growth makes it an ideal alloy for proof casting and precision measurement of internal dimensions. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on casting, forming, heat treating, and machining. Filing Code: Bi-12. Producer or source: Belmont Metals Inc..

BELMONT ALLOY 2405

Alloy Digest ◽  
1979 ◽  
Vol 28 (3) ◽  
Keyword(s):  
Low Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Base Alloy ◽  
Heat Treating ◽  
Temperature Range ◽  
Wax Pattern ◽  
Temperature Work

Abstract BELMONT ALLOY 2405 is a tin-base alloy that can be melted easily. Being non-eutectic it melts through a temperature range, namely 281 to 338 F. It is used widely for proof casting in foundries, for sealing and soldering in low-temperature work, and for lost-wax pattern dies. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on heat treating and machining. Filing Code: Sn-7. Producer or source: Belmont Metals Inc..

CERROMATRIX Alloy

Alloy Digest ◽  
1978 ◽  
Vol 27 (4) ◽  
Keyword(s):  
Low Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Melting Temperature ◽  
Eutectic Alloy ◽  
Heat Treating ◽  
Temperature Range ◽  
Metal Products

Abstract CERROMATRIX Alloy is a bismuth-base non-eutectic alloy that melts over the low temperature range of 218-440 F. Its low melting temperature and controlled-shrinkage characteristics make it a valuable tool of industry for such operations as anchoring punches in dies, repairing broken dies and filling blow holes in castings. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on casting, heat treating, and machining. Filing Code: Bi-4. Producer or source: Cerro Metal Products.

CERROLOW-117 Alloy

Alloy Digest ◽  
1978 ◽  
Vol 27 (10) ◽  
Keyword(s):  
Low Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Melting Temperature ◽  
Eutectic Alloy ◽  
Heat Treating ◽  
Dental Models ◽  
Metal Products

Abstract CERROLOW-117 Alloy is a bismuth-base eutectic alloy that melts at 117 F (47 C). Its low melting temperature and controlled-shrinkage characteristics make it very useful in industry for such applications as proof casting in tool and die shops, dental models and low-temperature solder. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on casting, forming, heat treating, and machining. Filing Code: Bi-8. Producer or source: Cerro Metal Products.

NICKELVAC L-605

Alloy Digest ◽  
1967 ◽  
Vol 16 (10) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Base Alloy ◽  
Heat Treating ◽  
Temperature Range ◽  
Temperature Performance ◽  
Cobalt Base Alloy ◽  
Cobalt Base

Abstract NICKELVAC L-605 is a double vacuum melted, cobalt-base alloy for high temperature applications. It is recommended for highly stressed parts operating in the temperature range of 1700 to 2000 F. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Co-53. Producer or source: Allvac Metals Company, A Teledyne Company.

CERROCAST Alloy

Alloy Digest ◽  
1980 ◽  
Vol 29 (3) ◽  
Keyword(s):  
Low Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Eutectic Alloy ◽  
Heat Treating ◽  
Melting Range ◽  
Spray Painting ◽  
Metal Products ◽  
Temperature Work

Abstract CERROCAST Alloy is a non-eutectic alloy with a melting range from 281 F to 338 F. It provides manufacturing engineers with an easily castable material that is ready for use soon after it freezes; moreover, it can be recovered readily and recycled into new uses any number of times. Cerrocast alloy is used widely for spray molding techniques, for sealing and soldering in low-temperature work, for proof casting in foundries and for masks in spray painting and electroplating. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on heat treating, machining, and joining. Filing Code: Sn-9. Producer or source: Cerro Metal Products.

INDALLOY 117

Alloy Digest ◽  
1981 ◽  
Vol 30 (9) ◽  
Keyword(s):  
Melting Point ◽  
Low Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Melting Temperature ◽  
Eutectic Alloy ◽  
Heat Treating ◽  
Safety Devices

Abstract INDALLOY 117 is a bismuth-base, eutectic alloy that has a melting point of 117 F (47 C). Because of its low melting temperature and controlled-shrinkage characteristics, it is used widely in industry. The alloy can be recovered easily and recycled into new uses any number of times. Its many uses include low-temperature solder, proof casting, fusible elements in safety devices and model railroading. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on casting, heat treating, and machining. Filing Code: Bi-26. Producer or source: Indium Corporation of America.

Sign in / Sign up

Export Citation Format

Share Document