AVESTA STAINLESS 25L

Alloy Digest ◽  
1985 ◽  
Vol 34 (9) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Nitric Acid ◽  
Austenitic Stainless Steel ◽  
High Resistance ◽  
Heat Treating ◽  
Low Carbon ◽  
Temperature Performance ◽  
Very High

Abstract AVESTA STAINLESS 25L is a low-carbon austenitic stainless steel which possesses very high resistance to general and intergranular corrosion in strongly oxidizing environments such as nitric acid. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-464. Producer or source: Avesta Stainless Inc..

SANDVIK 2RE10

Alloy Digest ◽  
1972 ◽  
Vol 21 (5) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Nitric Acid ◽  
High Resistance ◽  
Heat Treating ◽  
Low Carbon ◽  
High Chromium ◽  
Temperature Performance ◽  
High Nickel

Abstract SANDVIK 2RE10 is a high-chromium, high-nickel, extra-low-carbon austenitic stainless steel with high resistance to oxidizing media such as concentrated nitric acid, high resistance to intergranular corrosion and good structural stability. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-272. Producer or source: Sandvik. See also Alloy Digest SS-491, November 1987.

REMANIT 4306

Alloy Digest ◽  
1997 ◽  
Vol 46 (4) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Austenitic Stainless Steel ◽  
Cold Working ◽  
Heat Treating ◽  
Operating Conditions ◽  
Low Carbon ◽  
Corrosion Resistant ◽  
Temperature Performance

Abstract Remanit 4306 is a low-carbon chromium nickel austenitic stainless steel that is superior in corrosion resistance to type 302 (see Alloy Digest SS-99, revised September 1998). Due to its low carbon content, Remanit 4306 is intergranular corrosion resistant under continuous operating conditions up to 350 C (652 F). This grade is particular suitable for high degrees of cold working and for sequential drawing. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-679. Producer or source: Thyssen Stahl AG.

NIROSTA 4311

Alloy Digest ◽  
2002 ◽  
Vol 51 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Austenitic Stainless Steel ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Low Carbon ◽  
Temperature Performance

Abstract NIROSTA 4311 is an austenitic stainless steel of the 18 Cr-10 Ni low-carbon type strengthened with nitrogen. The alloy possesses much the same corrosion resistance as Type 304L, but maintains higher strength and toughness. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-859. Producer or source: ThyssenKrupp Nirosta GmbH.

URANUS-65

Alloy Digest ◽  
1968 ◽  
Vol 17 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Austenitic Stainless Steel ◽  
Elevated Temperatures ◽  
Heat Treating ◽  
Low Carbon ◽  
Corrosion Resistant ◽  
Temperature Performance

Abstract URANUS-65 is a low-carbon, chromium-nickel heat and corrosion resistant austenitic stainless steel recommended for parts to resist high stresses and oxidation at elevated temperatures. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-206. Producer or source: Compagnie des Ateliers et Forges de la Loire.

SANDVIK 2RE69

Alloy Digest ◽  
1989 ◽  
Vol 38 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Austenitic Stainless Steel ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Low Carbon ◽  
Temperature Performance

Abstract SANDVIK 2RE69 is a fully austenitic stainless steel with extra low carbon and impurity levels. It was developed primarily to cope with severe corrosive conditions existing in the urea industry. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-504. Producer or source: Sandvik.

SANDVIK 3RE60

Alloy Digest ◽  
1972 ◽  
Vol 21 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
High Resistance ◽  
Heat Treating ◽  
Low Carbon ◽  
Duplex Structure ◽  
Temperature Performance ◽  
Resistance To Stress

Abstract SANDVIK 3RE60 is an extra-low-carbon stainless steel with a duplex structure consisting of ferrite and austenite. It has high resistance to stress-corrosion cracking, good formability and good weldability. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-276. Producer or source: Sandvik.

SANDVIK 3R60

Alloy Digest ◽  
1996 ◽  
Vol 45 (2) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Austenitic Stainless Steel ◽  
Physical Properties ◽  
Intergranular Corrosion ◽  
Heat Treating ◽  
Carbide Precipitation ◽  
Low Carbon ◽  
Temperature Performance

Abstract Sandvik 3R60 is an acid resistant austenitic stainless steel. It has a low carbon content to offer decreased carbide precipitation and increased intergranular corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-636. Producer or source: Sandvik.

ALZ 316LNHMo

Alloy Digest ◽  
2002 ◽  
Vol 51 (1) ◽  
Keyword(s):  
Mechanical Properties ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Austenitic Stainless Steel ◽  
Pitting Corrosion ◽  
Heat Treating ◽  
Low Carbon ◽  
Temperature Performance ◽  
Corrosion Risk

Abstract ALZ 316LNHMo is an austenitic stainless steel with good formability, corrosion resistance, toughness, and good mechanical properties. This grade is nitrogen strengthened with a low carbon content, which improves the resistance to intergranular corrosion in welds and slower-cooled sections. The enhanced addition of molybdenum renders this steel particularly suitable for use in environments that have a high pitting corrosion risk. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: SS-839. Producer or source: ALZ nv.

SANDVIK 2RK65 (ALLOY 904L)

Alloy Digest ◽  
1989 ◽  
Vol 38 (7) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Austenitic Stainless Steel ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Process Industry ◽  
Low Carbon ◽  
Temperature Performance

Abstract SANDVIK 2RK65 (Alloy 904L) is an extra low carbon (0.020 max.) austenitic stainless steel for use under severe corrosion conditions within the process industry. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-508. Producer or source: Sandvik.

DMV 316 LUG

Alloy Digest ◽  
2008 ◽  
Vol 57 (6) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Austenitic Stainless Steel ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Low Carbon ◽  
Temperature Performance ◽  
Steel Modification

Abstract DMV 316 LUG is a low-carbon austenitic stainless steel modification of 316L with a very low ferrite content to resist corrosion in urea applications. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-1014. Producer or source: Mannesmann DMV Stainless USA Inc.

Sign in / Sign up

Export Citation Format

Share Document