SANDVIK 3RE60

Alloy Digest ◽  
1972 ◽  
Vol 21 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
High Resistance ◽  
Heat Treating ◽  
Low Carbon ◽  
Duplex Structure ◽  
Temperature Performance ◽  
Resistance To Stress

Abstract SANDVIK 3RE60 is an extra-low-carbon stainless steel with a duplex structure consisting of ferrite and austenite. It has high resistance to stress-corrosion cracking, good formability and good weldability. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-276. Producer or source: Sandvik.

SANDVIK SAF 2205

Alloy Digest ◽  
1987 ◽  
Vol 36 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Heat Treating ◽  
General Corrosion ◽  
Low Carbon ◽  
Temperature Performance ◽  
Resistance To Stress ◽  
Saf 2205

Abstract SANDVIK SAF 2205 is an extra-low carbon, ferritic-austenitic stainless steel. It has high resistance to stress-corrosion cracking; pitting; service and general corrosion. It has roughly twice the yield strength of austenitic stainless grades and it has good weldability. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-487. Producer or source: Sandvik.

USS 18-18-2 STAINLESS STEEL

Alloy Digest ◽  
1971 ◽  
Vol 20 (4) ◽  
Keyword(s):  
United States ◽  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Heat Treating ◽  
United States Steel Corporation ◽  
Temperature Performance ◽  
Aqueous Chloride ◽  
Resistance To Stress

Abstract USS 18-18-2 Stainless Steel (18% chromium-18% nickel-2% silicon) was developed specifically for superior resistance to stress-corrosion cracking in hot aqueous chloride solutions. This datasheet provides information on composition, physical properties, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-253. Producer or source: United States Steel Corporation.

SANDVIK 2RE10

Alloy Digest ◽  
1972 ◽  
Vol 21 (5) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Nitric Acid ◽  
High Resistance ◽  
Heat Treating ◽  
Low Carbon ◽  
High Chromium ◽  
Temperature Performance ◽  
High Nickel

Abstract SANDVIK 2RE10 is a high-chromium, high-nickel, extra-low-carbon austenitic stainless steel with high resistance to oxidizing media such as concentrated nitric acid, high resistance to intergranular corrosion and good structural stability. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-272. Producer or source: Sandvik. See also Alloy Digest SS-491, November 1987.

BOEHLER A965

Alloy Digest ◽  
2007 ◽  
Vol 56 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Stress Corrosion Cracking ◽  
Crevice Corrosion ◽  
Heat Treating ◽  
Temperature Performance ◽  
Resistance To Stress ◽  
Specialty Metals

Abstract Boehler A965 is a superaustenitic Cr-Ni-Mo stainless steel with excellent resistance to stress-corrosion cracking, pitting, and crevice corrosion. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-994. Producer or source: Böhler-Uddeholm Specialty Metals Inc.

AISI TYPE 416 and 416Se

Alloy Digest ◽  
1964 ◽  
Vol 13 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Heat Treating ◽  
Low Carbon ◽  
Steel Mills ◽  
Temperature Performance ◽  
Aisi Type ◽  
Type Stainless Steel

Abstract AISI Types 416 and 416Se are free-maching grades of the low-carbon chromium type stainless steel. The former contains sulfur while the latter contains selenium to produce the free-cutting characteristics. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-162. Producer or source: Stainless steel mills.

NIROSTA 4311

Alloy Digest ◽  
2002 ◽  
Vol 51 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Austenitic Stainless Steel ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Low Carbon ◽  
Temperature Performance

Abstract NIROSTA 4311 is an austenitic stainless steel of the 18 Cr-10 Ni low-carbon type strengthened with nitrogen. The alloy possesses much the same corrosion resistance as Type 304L, but maintains higher strength and toughness. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-859. Producer or source: ThyssenKrupp Nirosta GmbH.

SANDVIK 3R12

Alloy Digest ◽  
1995 ◽  
Vol 44 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Carbon Content ◽  
Tensile Properties ◽  
Heat Treating ◽  
Low Carbon ◽  
Temperature Performance

Abstract Sandvik 3R12 is an austenitic chromium-nickel stainless steel with extra low carbon content. It is superior to Type 302 in corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-612. Producer or source: Sandvik.

SANDVIK SAF 2304

Alloy Digest ◽  
1987 ◽  
Vol 36 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Stainless Steels ◽  
Austenitic Stainless Steels ◽  
Heat Treating ◽  
Low Carbon ◽  
Good Resistance ◽  
Temperature Performance ◽  
Resistance To Stress

Abstract SANDVIK SAF 2304 is a duplex (ferritic-austenitic) stainless steel of extra-low carbon content. Its yield strength is about double that of austenitic stainless steels and it has very good resistance to stress-corrosion cracking. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-483. Producer or source: Sandvik.

URANUS-65

Alloy Digest ◽  
1968 ◽  
Vol 17 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Austenitic Stainless Steel ◽  
Elevated Temperatures ◽  
Heat Treating ◽  
Low Carbon ◽  
Corrosion Resistant ◽  
Temperature Performance

Abstract URANUS-65 is a low-carbon, chromium-nickel heat and corrosion resistant austenitic stainless steel recommended for parts to resist high stresses and oxidation at elevated temperatures. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-206. Producer or source: Compagnie des Ateliers et Forges de la Loire.

SANDVIK 2RE69

Alloy Digest ◽  
1989 ◽  
Vol 38 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Austenitic Stainless Steel ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Low Carbon ◽  
Temperature Performance

Abstract SANDVIK 2RE69 is a fully austenitic stainless steel with extra low carbon and impurity levels. It was developed primarily to cope with severe corrosive conditions existing in the urea industry. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-504. Producer or source: Sandvik.

Sign in / Sign up

Export Citation Format

Share Document