MÄRKER G-4857M

Alloy Digest ◽  
1996 ◽  
Vol 45 (2) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Rupture Strength ◽  
Creep Rupture ◽  
Creep Rupture Strength ◽  
Good Resistance ◽  
Combustion Gases

Abstract Märker G-4857M is a 25Cr-37Ni-Mo alloy with good creep rupture strength and good resistance to carburization. and oxidation. The alloy is used as tubes and castings for reformer and pyrolysis furnaces. It can be used to 1100 deg C (2000 deg F) in air or combustion gases. This datasheet provides information on composition, physical properties, and tensile properties as well as creep. It also includes information on casting and joining. Filing Code: SS-635. Producer or source: Schmidt & Clemens Inc.

KUBOTA ALLOY KHR35C

Alloy Digest ◽  
1999 ◽  
Vol 48 (7) ◽  
Keyword(s):  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Rupture Strength ◽  
Creep Rupture ◽  
Creep Rupture Strength ◽  
Temperature Performance

Abstract Kubota alloy KHR35C is similar to HP alloy with the addition of niobium to increase its creep-rupture strength. Typical applications include components and assemblies for severe carburizing environments, such as ethylene pyrolysis coils. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance as well as casting and joining. Filing Code: SS-753. Producer or source: Kubota Metal Corporation.

MAERKER G-4848

Alloy Digest ◽  
1995 ◽  
Vol 44 (10) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Chemical Industry ◽  
Rupture Strength ◽  
Creep Rupture ◽  
Creep Rupture Strength ◽  
Heat Resistant Alloy ◽  
Resistant Alloy ◽  
Heat Resistant

Abstract MAERKER G-4848 is a heat resistant alloy for the petro chemical industry. The alloy has very good creep-rupture strength with low embrittlement. Similar to HK Mod. This datasheet provides information on composition, physical properties, and tensile properties as well as creep. It also includes information on casting and joining. Filing Code: SS-617. Producer or source: Schmidt & Clemens Inc.

CENTRALLOY 4848

Alloy Digest ◽  
1995 ◽  
Vol 44 (8) ◽  
Keyword(s):  
Stainless Steel ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Rupture Strength ◽  
High Stress ◽  
Stress Rupture ◽  
Good Resistance ◽  
Temperature Performance ◽  
Resistance To Oxidation

Abstract CENTRALLOY 4848 (HK-40) is a cast austenitic 25% chromium-20% nickel-stainless steel. A balanced composition provides excellent structural stability, high stress rupture strength and good resistance to oxidation and carburization. This datasheet provides information on composition, physical properties, and tensile properties as well as creep. It also includes information on high temperature performance as well as casting and joining. Filing Code: SS-604. Producer or source: Centracero S.A.

KUBOTA HW

Alloy Digest ◽  
2007 ◽  
Vol 56 (11) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Thermal Fatigue ◽  
Rupture Strength ◽  
Heat Treating ◽  
Creep Rupture Strength ◽  
Good Ductility ◽  
Temperature Performance

Abstract HW is a Ni-Fe-Cr alloy with moderate creep-rupture strength, good ductility, and an exceptional carburization resistance for service up to 1120 deg C (2050 deg F). The resistance of the alloy to thermal fatigue and shock make it particularly suited for furnace components operating in carburizing environments. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Ni-655. Producer or source: Kubota Metal Corporation, Fahramet Division.

INCONEL 713C

Alloy Digest ◽  
1959 ◽  
Vol 8 (2) ◽  
Keyword(s):  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Thermal Fatigue ◽  
Rupture Strength ◽  
Cast Alloy ◽  
International Nickel Company ◽  
Nickel Chromium ◽  
Temperature Performance ◽  
Inconel 713C

Abstract INCONEL 713C is a nickel-chromium cast alloy which possesses outstanding rupture strength at 1700 F. combined with excellent resistance to thermal fatigue and good castability. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as creep and fatigue. It also includes information on high temperature performance as well as machining and joining. Filing Code: Ni-50. Producer or source: International Nickel Company Inc..

COPPER ALLOY No. C84200

Alloy Digest ◽  
1982 ◽  
Vol 31 (10) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Lead Alloy ◽  
Good Resistance ◽  
Copper Zinc ◽  
Pipe Fittings ◽  
Strength And Ductility

Abstract Copper Alloy No. C84200 is a free-cutting copper-zinc-tin-lead alloy. It is characterized by good casting properties, moderate strength and ductility, good machinability and good resistance to corrosion. Formerly used named (not recommended) are 101, Leaded Semi-Red Brass and 80-5-2.5-12.5. Typical applications are pipe fittings, bushings, locknuts and unions. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-446. Producer or source: Copper alloy foundries. See also Alloy Digest Cu-450, December 1982.

COPPER ALLOY No. C93500

Alloy Digest ◽  
1982 ◽  
Vol 31 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Good Resistance ◽  
Corrosion Resistant ◽  
Low Strength

Abstract Copper Alloy No. C93500 is a cast bronze containing nominally 9% lead and 5% tin. It has excellent machinability, low strength and good resistance to corrosion. It is used for corrosion-resistant castings, small bearings and bushings. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-439. Producer or source: Copper alloy foundries.

AFCOMET 40

Alloy Digest ◽  
1953 ◽  
Vol 2 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Shear Strength ◽  
Cast Iron ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Good Resistance ◽  
Resistance To Wear

Abstract AFCOMET 40 is a dense, close-grained nickel-molybdenum cast iron with good resistance to wear and abrasion. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on casting, heat treating, machining, and joining. Filing Code: CI-2. Producer or source: Atlas Foundry Company.

THERMO-SPAN ALLOY

Alloy Digest ◽  
1994 ◽  
Vol 43 (2) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Fatigue Resistance ◽  
Thermal Fatigue ◽  
Rupture Strength ◽  
Stress Rupture ◽  
Heat Treating ◽  
Thermal Fatigue Resistance ◽  
Stress Rupture Strength

Abstract THERMO-SPAN ALLOY is a precipitation-hardenable superalloy with a low coefficient of expansion combined with tensile and stress-rupture strength. Thermal fatigue resistance is inherent. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on forming and heat treating. Filing Code: FE-105. Producer or source: Carpenter.

CARLSON ALLOY 90 10 CuNi

Alloy Digest ◽  
1995 ◽  
Vol 44 (5) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Sea Water ◽  
General Corrosion ◽  
Good Resistance

Abstract 90-10 Cupro-nickel is a highly ductile, malleable and corrosion resisting alloy, suitable for water applications. The alloy has approximately 1.4% iron to improve its resistance to sea water. It has good resistance to general corrosion and erosion. Easily fabricated. Readily weldable. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance. Filing Code: CU-600. Producer or source: G.O. Carlson Inc.

Sign in / Sign up

Export Citation Format

Share Document