CRUCIBLE 422

Alloy Digest ◽  
2007 ◽  
Vol 56 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Aerospace Industry ◽  
High Strength ◽  
Heat Treating ◽  
Tempered Martensite ◽  
Temperature Performance

Abstract Crucible 422 has a structure of tempered martensite to give the alloy high strength. It is useful in the aerospace industry for structurals with high strength/weight ratios. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-1004. Producer or source: Crucible Service Centers.

MAGNESIUM ZK60A

Alloy Digest ◽  
1967 ◽  
Vol 16 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Bend Strength ◽  
Chemical Company ◽  
Temperature Performance

Abstract Magnesium ZK60A is a heat treatable extrusion and forging alloy recommended for applications where high strength with good toughness are required. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and compressive, shear, bearing, and bend strength as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Mg-62. Producer or source: The Dow Chemical Company.

ARMCO PH 13-8Mo

Alloy Digest ◽  
1990 ◽  
Vol 39 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Stress Corrosion ◽  
Tensile Properties ◽  
High Performance ◽  
High Strength ◽  
Heat Treating ◽  
Temperature Performance

Abstract ARMCO PH 13-8Mo is designed for high-performance applications requiring high strength coupled with excellent resistance to corrosion and stress corrosion. It has excellent toughness, good transverse properties and excellent forgeability. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-224. Producer or source: Baltimore Specialty Steels Corporation. Originally published May 1969, revised February 1990.

ALLEGHENY LUDLUM ALLOY S-590

Alloy Digest ◽  
1956 ◽  
Vol 5 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Temperature Performance

Abstract ALLOY S-590 is designed for service in the range of 1100-1400 F for applications where high strength and corrosion resistance are required. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-39. Producer or source: Allegheny Ludlum Corporation.

N-A-X HIGH-TENSILE

Alloy Digest ◽  
1960 ◽  
Vol 9 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
High Temperature ◽  
Great Lakes ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Temperature Performance

Abstract N-A-X HIGH-TENSILE is a low-alloy high-strength construction steel combining good ductility, workability and weldability. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-94. Producer or source: Great Lakes Steel Corporation.

IN-833

Alloy Digest ◽  
1972 ◽  
Vol 21 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Temperature Performance ◽  
Heat Treated

Abstract IN-833 is a cast precipitation-hardenable stainless steel that can be heat treated to achieve high strength with good ductility. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on low and high temperature performance, and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: SS-283. Producer or source: Alloy steel foundries.

OLIN ALLOY 194

Alloy Digest ◽  
1978 ◽  
Vol 27 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Low Cost ◽  
High Strength ◽  
Heat Treating ◽  
Flexible Hose ◽  
Temperature Performance

Abstract OLIN Alloy 194 was developed to provide a low-cost, high-conductivity, high-strength alloyed copper. It meets these requirements in many and varied applications. Typical uses are electrical terminals and contacts, electrical switches, eyelets and flexible hose. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-360. Producer or source: Olin Corporation, Brass Group.

UNITEMP L-605

Alloy Digest ◽  
1990 ◽  
Vol 39 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Temperature Performance ◽  
Cobalt Base ◽  
Oxidation And Corrosion

Abstract UNITEMP L-605 is a cobalt-base austenitic alloy with excellent oxidation and corrosion resistance. It has high strength to about 2000 F (1093 C). It resists body fluids and thus finds use in implants. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Co-69. Producer or source: Cyclops Corporation. Originally published as Alloy Digest Co-15, February 1959, revised July 1990.

AMBRALOY 917

Alloy Digest ◽  
1953 ◽  
Vol 2 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Aluminum Bronze ◽  
Temperature Performance

Abstract AMBRALOY 917 is a heat treatable aluminum bronze combining high strength with excellent resistance to corrosion. It is wear and abrasion resistant. It is also nonmagnetic and resistant to sparking. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-5. Producer or source: American Brass Company.

NIMARK 300

Alloy Digest ◽  
1970 ◽  
Vol 19 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Nickel Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Low Carbon ◽  
Temperature Performance

Abstract NIMARK 300 is a vacuum melted low carbon, 18% nickel alloy steel which attains yield strengths in excess of 270,000 psi. It is recommended for high strength, shock resisting applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-254. Producer or source: Carpenter.

CARPENTER 286-LNi ALLOY

Alloy Digest ◽  
2008 ◽  
Vol 57 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Temperature Performance ◽  
Technology Corporation ◽  
Carpenter Technology Corporation

Abstract Carpenter 286-LNi Alloy is a precipitation-hardenable Fe-Ni-Cr alloy designed to resist corrosion while providing high strength at temperatures up to 704 deg C (1300 deg F). This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming and heat treating. Filing Code: SS-1021. Producer or source: Carpenter Technology Corporation.

Sign in / Sign up

Export Citation Format

Share Document