P550

Alloy Digest ◽  
2017 ◽  
Vol 66 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Nitrogen Content ◽  
Tensile Properties ◽  
High Nitrogen Content ◽  
High Nitrogen ◽  
Nonmagnetic Steel

Abstract P550 is a fully austenitic Mn-Cr-N steel with 1.4% nickel minimum. The alloy is a special nonmagnetic steel with a high nitrogen content. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance. Filing Code: SS-1266. Producer or source: Schoeller-Bleckmann.

OUTOKUMPU FORTA H500

Alloy Digest ◽  
2018 ◽  
Vol 67 (2) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Austenitic Stainless Steel ◽  
Physical Properties ◽  
Nitrogen Content ◽  
Tensile Properties ◽  
Work Hardening ◽  
Research Centre ◽  
High Nitrogen Content ◽  
High Nitrogen

Abstract Forta H500 is an austenitic stainless steel in which manganese replaces some of the nickel. Its high-nitrogen content adds strength. Grades Forta H800 and H1000 can be derived from the same composition by changing the degree of work hardening. This datasheet provides information on physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming and joining. Filing Code: SS-1278. Producer or source: Outokumpu Stainless AB, Avesta Research Centre.

OUTOKUMPU FORTA H400

Alloy Digest ◽  
2018 ◽  
Vol 67 (1) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Austenitic Stainless Steel ◽  
Physical Properties ◽  
Carbon Content ◽  
Nitrogen Content ◽  
Research Centre ◽  
Low Carbon ◽  
High Nitrogen Content ◽  
High Nitrogen

Abstract Forta H400 is an austenitic stainless steel in which manganese replaces some of the nickel. Its high-nitrogen content adds strength. This variant has low carbon content. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming. Filing Code: SS-1276. Producer or source: Outokumpu Stainless AB, Avesta Research Centre.

INCONEL ALLOY 725

Alloy Digest ◽  
1994 ◽  
Vol 43 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Inconel Alloy ◽  
Alloy 625

Abstract INCONEL ALLOY 725 is an age-hardenable alloy that displays high strength along with excellent ductility and toughness. Its corrosion resistance is comparable to alloy 625. Good flattening properties are exhibited in age-hardened tubing. This datasheet provides information on composition, physical properties, hardness, tensile properties, and shear strength as well as fracture toughness. It also includes information on corrosion resistance as well as heat treating and machining. Filing Code: Ni-445. Producer or source: Inco Alloys International Inc.

FEDERALOY F-1

Alloy Digest ◽  
1954 ◽  
Vol 3 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Temperature Performance

Abstract Federaloy F-1 is a copper tin-zinc bearing bronze whose strength suits it for applications where loads are heavy. It should be used only where lubrication is exceptionally good or motion is of a rocking nature. It is also a good gear bronze. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness, creep, and deformation. It also includes information on high temperature performance and corrosion resistance as well as casting, machining, and joining. Filing Code: Cu-19. Producer or source: Federal-Mogul Corporation.

APEX 39

Alloy Digest ◽  
1959 ◽  
Vol 8 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Die Casting ◽  
Casting Alloy ◽  
Alloy Ingot ◽  
Temperature Performance

Abstract APEX 39 is an aluminum die casting alloy ingot containing copper and silicon. It has excellent castability and improved machinability. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as casting and machining. Filing Code: Al-75. Producer or source: Apex Smelting Company.

MONEL ALLOY R-405

Alloy Digest ◽  
1963 ◽  
Vol 12 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Nickel Copper

Abstract MONEL alloy R-405 is a machining grade of nickel-copper alloy that combines toughness, strength and corrosion resistance of MONEL alloy 400 with excellent machinability. The alloy is designed especially for use in automatic screw machines. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-79. Producer or source: Huntington Alloy Products Division.

COPPER ALLOY No. C93500

Alloy Digest ◽  
1982 ◽  
Vol 31 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Good Resistance ◽  
Corrosion Resistant ◽  
Low Strength

Abstract Copper Alloy No. C93500 is a cast bronze containing nominally 9% lead and 5% tin. It has excellent machinability, low strength and good resistance to corrosion. It is used for corrosion-resistant castings, small bearings and bushings. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-439. Producer or source: Copper alloy foundries.

ULTEM 6100, ULTEM 6200, ULTEM 6202

Alloy Digest ◽  
1990 ◽  
Vol 39 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Temperature Materials ◽  
Electrical Components

Abstract ULTEM 6100 and 6200 are glass reinforced and ULTEM 6202 is a mineral filled copolymer resin. For properties of the unreinforced resin, ULTEM 6000, see Alloy Digest P-27, June 1991. These are high temperature materials that are particularly suitable for military electrical components which must survive 200 C testing. This datasheet provides information on physical properties, hardness, tensile properties, and compressive and shear strength as well as fracture toughness. It also includes information on corrosion resistance. Filing Code: Cp-16. Producer or source: G. E. Plastics.

MEEHANITE GF-20

Alloy Digest ◽  
1973 ◽  
Vol 22 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Cast Iron ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Gray Cast Iron ◽  
Heat Treating ◽  
Gray Cast

Abstract MEEHANITE GF-20 is a gray cast iron designed principally for high machinability and is used where strength is not an important factor. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, joining, and surface treatment. Filing Code: CI-39. Producer or source: Meehanite Metal Corporation.

G-30 FILLER METAL

Alloy Digest ◽  
1993 ◽  
Vol 42 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Filler Metal ◽  
Weld Repair ◽  
Weld Overlay ◽  
High Chromium ◽  
Cast Products

Abstract Hastelloy Alloy G-30 filler metal is used as matching composition filler metal for fabrication of Hastelloy G-30 wrought and cast products and as filler metal for fabrication of G/G-3 alloy wrought products. It is also used for weld repair of high chromium castings and for weld overlay cladding. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as joining. Filing Code: Ni-432. Producer or source: Haynes International Inc.

Sign in / Sign up

Export Citation Format

Share Document