MEEHANITE GF-20

Alloy Digest ◽  
1973 ◽  
Vol 22 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Cast Iron ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Gray Cast Iron ◽  
Heat Treating ◽  
Gray Cast

Abstract MEEHANITE GF-20 is a gray cast iron designed principally for high machinability and is used where strength is not an important factor. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, joining, and surface treatment. Filing Code: CI-39. Producer or source: Meehanite Metal Corporation.

PEARLITIC MALLEABLE IRON

Alloy Digest ◽  
1959 ◽  
Vol 8 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Cast Iron ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Malleable Iron

Abstract PEARLITIC MALLEABLE IRON is a high strength cast iron recommended for dependable service, strength and machinability in highly stressed parts at work in mobile and stationary mechanisms. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: CI-26. Producer or source: Albian Malleable Iron Company.

COPPER ALLOY No. 101

Alloy Digest ◽  
1974 ◽  
Vol 23 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Low Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Temperature Performance

Abstract Copper No. 101 is a wrought oxygen-free, high-conductivity copper for electrical and electronic applications. Its trade designation is OFE (Oxygen Free Electronic) copper. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness and fatigue. It also includes information on low temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Cu-278. Producer or source: Copper and copper alloy mills.

AWX STEEL

Alloy Digest ◽  
1971 ◽  
Vol 20 (10) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Yield Strength ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Heat Treating ◽  
Low Alloy Steel ◽  
Steel Company

Abstract AWX STEEL is a columbium-bearing low-alloy steel supplied at four yield strength levels where excellent formability and good weldability are required and corrosion resistance is not a great factor. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-269. Producer or source: Alan Wood Steel Company.

Ti-150A

Alloy Digest ◽  
1954 ◽  
Vol 3 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Base Alloy ◽  
Heat Treating ◽  
Temperature Performance

Abstract Ti-150A is a titanium-base alloy containing iron and chromium. It is used primarily in bars and forgings. It is heat treatable and work-hardenable. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ti-2. Producer or source: Titanium Metals Corporation of America.

REM-CRU A-55

Alloy Digest ◽  
1957 ◽  
Vol 6 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Heat Treating ◽  
General Purpose ◽  
Temperature Performance

Abstract REM-CRU A-55 is the general purpose grade of unalloyed titanium for moderate to severe forming. (Formerly known as RC-55). This datasheet provides information on composition, physical properties, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness, creep, and fatigue. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ti-13. Producer or source: Rem-Cru Titanium Inc..

OLYMPIC BRONZE TYPE A

Alloy Digest ◽  
1955 ◽  
Vol 4 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
High Strength ◽  
Type A ◽  
Heat Treating ◽  
Silicon Bronze

Abstract OLYMPIC BRONZE Type A is a silicon bronze designed especially for structural and engineering purposes. It has the combination of high strength, workability, and corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Cu-22. Producer or source: Chase Brass & Copper Company Inc..

MST 4Al-4Mn

Alloy Digest ◽  
1956 ◽  
Vol 5 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Elevated Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Heat Treating ◽  
Alpha Beta

Abstract MST 4Al-4Mn is a heat treatable alpha-beta bar and forging alloy having good elevated temperature properties. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness, creep, and fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ti-10. Producer or source: Mallory-Sharon Titanium Corporation.

INCONEL ALLOY 725

Alloy Digest ◽  
1994 ◽  
Vol 43 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Inconel Alloy ◽  
Alloy 625

Abstract INCONEL ALLOY 725 is an age-hardenable alloy that displays high strength along with excellent ductility and toughness. Its corrosion resistance is comparable to alloy 625. Good flattening properties are exhibited in age-hardened tubing. This datasheet provides information on composition, physical properties, hardness, tensile properties, and shear strength as well as fracture toughness. It also includes information on corrosion resistance as well as heat treating and machining. Filing Code: Ni-445. Producer or source: Inco Alloys International Inc.

MONEL ALLOY R-405

Alloy Digest ◽  
1963 ◽  
Vol 12 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Nickel Copper

Abstract MONEL alloy R-405 is a machining grade of nickel-copper alloy that combines toughness, strength and corrosion resistance of MONEL alloy 400 with excellent machinability. The alloy is designed especially for use in automatic screw machines. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-79. Producer or source: Huntington Alloy Products Division.

WIELAND-Z30

Alloy Digest ◽  
2005 ◽  
Vol 54 (8) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Cold Working ◽  
Heat Treating ◽  
Good Strength ◽  
Metalworking Industry

Abstract Wieland-Z30 has good hot and cold working properties and good strength. The alloy is easily machined and used often in the metalworking industry. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CU-735. Producer or source: Wieland Metals Inc., Wieland-Werke AG.

Sign in / Sign up

Export Citation Format

Share Document