KBI-40 Alloy

Alloy Digest ◽  
1984 ◽  
Vol 33 (3) ◽  
Keyword(s):  
Solid Solution ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Temperatures ◽  
Heat Exchangers ◽  
Heat Treating ◽  
Chemical Corrosion ◽  
Cabot Corporation

Abstract KB1-40 Alloy is a solid solution of 60% tantalum and 40% columbium (niobium). It costs much less than tantalum, yet it retains much of tantalum's excellent ability to resist chemical corrosion at high temperatures. It has higher tensile and yield strengths than tantalum and comparable ductility. Typical applications are heat exchangers, reactors, condensers and thermowells. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ta-7. Producer or source: Cabot Corporation.

KBI-10 ALLOY

Alloy Digest ◽  
1989 ◽  
Vol 38 (6) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Temperatures ◽  
High Strength ◽  
Heat Treating ◽  
Tungsten Alloy ◽  
Cabot Corporation ◽  
Aerospace Material

Abstract KBI-10 alloy is a high-strength tantalum-tungsten alloy. It has excellent strength at high temperatures. This gives it serviceability as an aerospace material. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ta-12. Producer or source: Cabot Corporation.

REVERE No. 464

Alloy Digest ◽  
1969 ◽  
Vol 18 (8) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Heat Exchangers ◽  
Heat Treating ◽  
Oil Refinery ◽  
Zinc Alloy ◽  
Refinery Equipment ◽  
Copper Zinc

Abstract Revere No. 464 is a copper-zinc alloy having good strength, toughness, and resistance to corrosion. It is recommended for steam condensers, marine equipment and oil refinery equipment, most especially in the form of sheet and plate, the latter as the heads for condensers and similar heat exchangers. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Cu-204. Producer or source: Revere Copper and Brass Inc..

NIMAG 105

Alloy Digest ◽  
1976 ◽  
Vol 25 (5) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Curie Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Nickel Alloy ◽  
High Temperatures ◽  
Heat Treating ◽  
High Curie Temperature ◽  
Magnetostriction Coefficient

Abstract NIMAG 105 is a wrought nickel alloy with a high magnetostriction coefficient. It is easily formed or drawn, has a high Curie temperature and has low oxidation at high temperatures. It is recommended for electronic and electrical applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-228. Producer or source: Spang Industries Inc..

PYROMET 538

Alloy Digest ◽  
1970 ◽  
Vol 19 (12) ◽  
Keyword(s):  
Solid Solution ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Oxidation Resistance ◽  
Heat Treating ◽  
Temperature Performance ◽  
Technology Corporation ◽  
Carpenter Technology Corporation

Abstract PYROMET 538 is a solid-solution strengthened, austenitic alloy with a desirable combination of strength, corrosion resistance, oxidation resistance, and economy. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-247. Producer or source: Carpenter Technology Corporation.

AK STEEL 410S

Alloy Digest ◽  
2006 ◽  
Vol 55 (5) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Ferritic Stainless Steel ◽  
High Temperatures ◽  
Heat Treating ◽  
Austenite Formation ◽  
Oxidation Resistant

Abstract AK Steel 410S is a fully ferritic stainless steel with elements added to retard austenite formation at high temperatures. The resulting low hardening allows for use as oxidation-resistant parts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-964. Producer or source: AK Steel.

RA 309

Alloy Digest ◽  
1963 ◽  
Vol 12 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Temperatures ◽  
Heat Treating ◽  
Corrosion Resistant Steel ◽  
Resistant Steel ◽  
Corrosion Resistant ◽  
Temperature Performance

Abstract RA 309 is a chromium-nickel heat and corrosion resistant steel recommended for high temperatures applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-142. Producer or source: Rolled Alloys Inc..

ZIRCADYNE 706

Alloy Digest ◽  
1983 ◽  
Vol 32 (5) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Heat Exchangers ◽  
Heat Treating ◽  
Chemical Compositions ◽  
Chemical Processing ◽  
Lower Oxygen ◽  
Panel Type

Abstract ZIRCADYNE 706 is a zirconium-niobium (columbium) alloy containing 2-3% niobium. It is similar in chemical compositions (except for slightly lower oxygen) to Zircadyne 705 (Alloy Digest Zr-8, July 1982). Zircadyne 706 was developed specifically for severe forming applications such as panel-type heat exchangers. The corrosion resistance of Zircadyne 706 is identical to that of Zircadyne 705 but its tensile and yield strengths are slightly lower. It is recommended for chemical processing applications. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Zr-10. Producer or source: Teledyne Wah Chang Albany.

NICKEL 200

Alloy Digest ◽  
1962 ◽  
Vol 11 (10) ◽  
Keyword(s):  
Mechanical Properties ◽  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Temperatures ◽  
Heat Treating ◽  
Temperature Performance ◽  
Nickel 200

Abstract Nickel-200 is a wrought metal combining excellent mechanical properties with corrosion resistance. It retains its strength to an excellent degree at high temperatures. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-75. Producer or source: Huntington Alloy Products Division.

TOPHET ALLOY A

Alloy Digest ◽  
1990 ◽  
Vol 39 (12) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Resistance Heating ◽  
Chemical Corrosion ◽  
Technology Corporation ◽  
Carpenter Technology Corporation

Abstract TOPHET Alloy A has long been used in resistance heating elements serviceable to 2150 F(1175 C). Resistance to chemical corrosion and to carburizing atmospheres broaden the alloy's range of applications. This Digest supercedes Filing Code Ni-39 of 2/58. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-389. Producer or source: Carpenter Technology Corporation.

CARPENTER NICKEL 211 ALLOY

Alloy Digest ◽  
1988 ◽  
Vol 37 (9) ◽  
Keyword(s):  
Solid Solution ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Pure Nickel ◽  
Manganese Alloy ◽  
Commercially Pure ◽  
Nickel 200 ◽  
Nickel Manganese

Abstract CARPENTER NICKEL 211 ALLOY is a nickel-manganese alloy that is slightly harder than commercially pure nickel (Nickel 200). It is a solid-solution strengthened alloy. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: Ni-361. Producer or source: Carpenter.

Sign in / Sign up

Export Citation Format

Share Document