CARPENTER No. 610

Alloy Digest ◽  
1980 ◽  
Vol 29 (1) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Heat Treating ◽  
Proper Treatment ◽  
High Carbon ◽  
High Hardenability ◽  
High Chromium ◽  
Very High ◽  
Hardened Condition

Abstract CARPENTER No. 610 is a high-carbon, high-chromium tool steel with extremely high wear-resisting properties. It has very high hardenability (air hardening) and will be practically free from size changes after proper treatment. Its high percentage of chromium gives it mild corrosion resistance in the hardened condition. Typical applications include various types of dies, slitting cutters, heading tools and intricate punches. This datasheet provides information on composition, physical properties, and hardness as well as deformation. It also includes information on forming, heat treating, machining, and surface treatment. Filing Code: TS-358. Producer or source: Carpenter.

GUTERL D-2

Alloy Digest ◽  
1981 ◽  
Vol 30 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Heat Treating ◽  
High Carbon ◽  
High Hardenability ◽  
Die Steel ◽  
High Chromium ◽  
Minimum Distortion

Abstract GUTERL D-2 is a high-hardenability tool and die steel of the high-carbon, high-chromium type. It has high compressive strength, his resistance to abrasion, minimum distortion in hardening but only fair toughness. Among its many uses are rolls, punches, shear blades, lathe centers and many types of cutting and forming dies. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and surface treatment. Filing Code: TS-380. Producer or source: Guterl Special Steel Corporation.

ARMCO 440A

Alloy Digest ◽  
2000 ◽  
Vol 49 (5) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Heat Treating ◽  
Surgical Instruments ◽  
High Carbon ◽  
High Chromium ◽  
International Sales ◽  
Chromium Stainless Steel ◽  
Hardened Condition

Abstract Armco 440A is a martensitic hardenable, high-carbon, high-chromium stainless steel recommended for cutlery, valve parts, and surgical instruments. It is always used in the hardened condition. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-783. Producer or source: Armco International Sales.

BLENDALLOY 25-7904

Alloy Digest ◽  
1972 ◽  
Vol 21 (11) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Coercive Force ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Heat Treating ◽  
Magnetic Shielding ◽  
High Permeability ◽  
Magnetic Cores ◽  
Very High

Abstract BLENDALLOY 25-7904 is an 80% nickel-15% iron-5% molybdenum alloy having very high permeability and low coercive force for magnetic cores in such applications as transformer laminations, sensitive magnetic amplifiers and magnetic shielding. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-181. Producer or source: Spang Industries Inc..

ALLEGHENY LUDLUM STAINLESS TYPE 440A

Alloy Digest ◽  
1955 ◽  
Vol 4 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
High Hardness ◽  
Heat Treating ◽  
Chromium Steel ◽  
High Carbon

Abstract ALLEGHENY LUDLUM STAINLESS TYPE 440A is a hardenable high-carbon chromium steel designed to provide stainless properties with high hardness. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-38. Producer or source: Allegheny Ludlum Corporation.

BRUSH ALLOY 25

Alloy Digest ◽  
1978 ◽  
Vol 27 (6) ◽  
Keyword(s):  
Tensile Strength ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Deep Drawing ◽  
Base Alloy ◽  
Heat Treating ◽  
Copper Base ◽  
Copper Base Alloy ◽  
Hardened Condition

Abstract BRUSH Alloy 25 attains the highest strength and hardness of any copper-base alloy. In the age-hardened condition, its tensile strength can exceed 200,000 psi and its Rockwell C hardness can reach 45. Its many applications include springs, deep-drawing parts, current-carrying springs connectors. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Cu-356. Producer or source: Brush Wellman Inc..

UNS H47180

Alloy Digest ◽  
1988 ◽  
Vol 37 (6) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Heat Treating ◽  
Low Carbon ◽  
High Hardenability ◽  
Nickel Chromium ◽  
Steel Mills

Abstract UNS No. H47180 is a low-carbon nickel-chromium-molybdenum carburizing steel recommended for applications requiring a strong, tough core combined with a highly wear-resistant carburized case. It has fairly high hardenability and can be used without carburizing. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-430. Producer or source: Alloy steel mills and foundries.

FERRO-TIC CM

Alloy Digest ◽  
1973 ◽  
Vol 22 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Titanium Carbide ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tool Steel ◽  
Heat Treating ◽  
Wear Resistant ◽  
High Chromium ◽  
American Corporation ◽  
Forming Tools

Abstract FERRO-TIC CM is a cemented carbide comprising titanium carbide in a matrix of high-chromium tool steel. It is machinable and heat treatable by conventional means, and is recommended for heavy stamping or forming tools and wear-resistant components. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on corrosion resistance as well as heat treating, machining, joining, and surface treatment. Filing Code: TS-253. Producer or source: Chromalloy American Corporation, Sintercast Division.

UHB STAVAX ESR

Alloy Digest ◽  
1976 ◽  
Vol 25 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
High Hardness ◽  
Heat Treating ◽  
High Chromium ◽  
Plastic Mold

Abstract UHB STAVAX ESR is a high-chromium (13.6%) martensitic stainless plastic-mold steel. It is Electro-Slag Refined (ESR) to provide the best polishability. It is characterized by good hardenability, high hardness, excellent polishability and fair resistance to corrosion. It is used for both injection and compression plastic molds. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-331. Producer or source: Uddeholm Aktiebolag. See also Alloy Digest SS-299, August 1974.

LESCALLOY UT-19 VAC-ARC

Alloy Digest ◽  
1983 ◽  
Vol 32 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Heat Treating ◽  
Steel Company ◽  
High Hardenability ◽  
Core Hardness ◽  
Ingot Solidification

Abstract LESCALLOY UT-19 VAC-ARC is a premium quality carburizing steel with high hardenability. It is produced by vacuum are remelting (VAR) to provide a preferred ingot solidification and superior microcleanliness. It is used for aircraft gears, pinions and other carburized parts that require a high minimum core hardness. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-394. Producer or source: Latrobe Steel Company.

AISI 4718

Alloy Digest ◽  
1973 ◽  
Vol 22 (6) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Heat Treating ◽  
Low Carbon ◽  
High Hardenability ◽  
Nickel Chromium ◽  
Steel Mills

Abstract AISI 4718 is a low-carbon nickel-chromium-molybdenum carburizing steel recommended for applications requiring a strong, tough core combined with a highly wear-resistant carburized case. It has fairly high hardenability and can be used without carburizing. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-289. Producer or source: Alloy steel mills and foundries.

Sign in / Sign up

Export Citation Format

Share Document