WINDSOR

Alloy Digest ◽  
1981 ◽  
Vol 30 (8) ◽  
Keyword(s):  
Service Life ◽  
Physical Properties ◽  
Tool Steel ◽  
Abrasion Resistance ◽  
Heat Treating ◽  
Steel Company

Abstract WINDSOR is a medium-alloy, air-hardening tool steel possessing superior abrasion resistance for long service life. Its inherent wearability and toughness make it particularly adaptable for use in dies and punches in extended production runs. It also has excellent nondeforming characteristics. Its many applications include blanking dies, coining, cold shears and punches. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, and machining. Filing Code: TS-385. Producer or source: Jessop Steel Company.

LESCO T-15 PM

Alloy Digest ◽  
1990 ◽  
Vol 39 (8) ◽  
Keyword(s):  
Powder Metallurgy ◽  
Physical Properties ◽  
Tool Steel ◽  
Abrasion Resistance ◽  
High Speed ◽  
Heat Treating ◽  
High Carbon ◽  
Steel Company ◽  
Good Retention ◽  
Hot Hardness

Abstract LESCOT-15 PM is a special purpose tungsten type high-speed tool steel containing cobalt for good retention of hot hardness and high carbon and vanadium for enhanced abrasion resistance. It is produced by powder metallurgy. This datasheet provides information on composition, physical properties, microstructure, hardness, and elasticity. It also includes information on heat treating and machining. Filing Code: TS-498. Producer or source: Latrobe Steel Company. Originally published August 1989, revised August 1990.

CLARITE HW26

Alloy Digest ◽  
1987 ◽  
Vol 36 (8) ◽  
Keyword(s):  
Service Life ◽  
Tool Steel ◽  
Abrasion Resistance ◽  
Elevated Temperatures ◽  
Heat Treating ◽  
Water Cool ◽  
Steel Company ◽  
Medium Carbon ◽  
Hot Work Tool Steel ◽  
Die Life

Abstract CLARITE HW26 is a medium-carbon tungsten hot-work tool steel. It has the highest resistance to softening at elevated temperatures and highest abrasion resistance of any hot-work tool steel. In the 1200-1300 F range it retains good working hardness and sufficient toughness to give outstanding performance. For maximum service life, tools should be pre-heated before starting hot operation and air cooled when necessary during hot operation; do not water cool at any time. CLARITE HW26 is recommended when long tool and die life is required at elevated temperatures. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, and machining. Filing Code: TS-479. Producer or source: Columbia Tool Steel Company.

HYCC

Alloy Digest ◽  
1963 ◽  
Vol 12 (4) ◽  
Keyword(s):  
Physical Properties ◽  
Tool Steel ◽  
Abrasion Resistance ◽  
Heat Treating ◽  
High Carbon ◽  
Steel Company ◽  
High Chromium ◽  
Crucible Steel

Abstract HYCC is a high-carbon high-chromium tool steel having high wear and abrasion resistance combined with non-deforming characteristics. It is particularly adaptable for blanking dies and punches. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-132. Producer or source: Crucible Steel Company of America.

JESSOP 259

Alloy Digest ◽  
1965 ◽  
Vol 14 (5) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Tool Steel ◽  
Abrasion Resistance ◽  
Heat Treating ◽  
Steel Company ◽  
Manganese Alloy ◽  
Alloy Tool

Abstract Jessop 259 is an extremely tough silico-manganese alloy tool steel with outstanding shock and abrasion resistance. It is recommended for shock resisting applications such as pneumatic tools, punches, concrete breakers, rivet busters, etc. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-164. Producer or source: Jessop Steel Company.

CRUCIBLE CSM #2

Alloy Digest ◽  
1968 ◽  
Vol 17 (9) ◽  
Keyword(s):  
Physical Properties ◽  
Tool Steel ◽  
Die Casting ◽  
Heat Treating ◽  
Steel Company ◽  
Heat Treated ◽  
Alloy Tool ◽  
Crucible Steel

Abstract Crucible CSM #2 is an alloy tool steel recommended for die casting dies and plastic molds. It is usually heat treated to two hardness levels, either 200 Brinell or 300 Brinell. CSM #2 machines readily and polishes easily at both hardness levels. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-210. Producer or source: Crucible Steel Company of America.

KETOS

Alloy Digest ◽  
1960 ◽  
Vol 9 (8) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Tool Steel ◽  
Heat Treating ◽  
Grain Structure ◽  
Steel Company ◽  
Fine Grain ◽  
Crucible Steel

Abstract KETOS is an oil-hardening non-deforming tool steel having deep hardening qualities with a fine grain structure. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as deformation. It also includes information on forming, heat treating, and machining. Filing Code: TS-96. Producer or source: Crucible Steel Company of America.

SELECT B

Alloy Digest ◽  
1985 ◽  
Vol 34 (10) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Abrasion Resistance ◽  
Heat Treating ◽  
Tool Steels ◽  
High Carbon ◽  
Steel Company ◽  
Die Steel ◽  
High Chromium ◽  
Aisi Type

Abstract SELECT B is a fully uniform air-hardening die steel having abrasion resistance intermediate between Olympic (AISI Type D2) high-carbon, high-chromium die steel and Badger (AISI Type O1) oil-hardening die steel. SELECT B has excellent non-deforming, deep-hardening characteristics and good toughness. Its machinability is comparable to most oil-hardening tool steels. Among its many uses are cold blanking and forming dies, rolls, punches, gages and broaches. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, and machining. Filing Code: TS-448. Producer or source: Latrobe Steel Company.

COLUMBIA S6

Alloy Digest ◽  
1985 ◽  
Vol 34 (8) ◽  
Keyword(s):  
Wear Resistance ◽  
Physical Properties ◽  
Tool Steel ◽  
Heat Treating ◽  
Steel Company ◽  
High Hardenability ◽  
Heat Treated ◽  
Strength And Toughness

Abstract COLUMBIA S6 is a silicon-manganese shock-resisting tool steel with fairly high hardenability. It offers superior toughness and wear resistance when compared to conventional shock-resisting steels heat treated to Rockwell C 54 to 56. For optimum strength and toughness, parts should be tempered within the range 400 to 600 F. Among its many applications are shear blades, punches, hand chisels and pneumatic tools. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, and machining. Filing Code: TS-445. Producer or source: Columbia Tool Steel Company.

LSS H21

Alloy Digest ◽  
2013 ◽  
Vol 62 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Physical Properties ◽  
Tool Steel ◽  
Heat Treating ◽  
Steel Company ◽  
Hot Work Tool Steel ◽  
Specialty Steel

Abstract LSS H21 is a hot work tool steel recommended for difficult hot work tooling applications. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fracture toughness. It also includes information on heat treating and machining. Filing Code: TS-713. Producer or source: Latrobe Specialty Steel Company.

LSS H10

Alloy Digest ◽  
2008 ◽  
Vol 57 (9) ◽  
Keyword(s):  
Wear Resistance ◽  
Physical Properties ◽  
Tool Steel ◽  
Thermal Fatigue ◽  
Heat Treating ◽  
Steel Company ◽  
Hot Work Tool Steel ◽  
Specialty Steel

Abstract LSS H10 is a hot-work tool steel with resistance to temperature softening and thermal fatigue. This datasheet provides information on composition, physical properties, and elasticity. It also includes information on wear resistance as well as heat treating and machining. Filing Code: TS-672. Producer or source: Latrobe Specialty Steel Company.

Sign in / Sign up

Export Citation Format

Share Document