Fatigue crack propagation prediction of a pressure vessel mild steel based on a strain energy density model

2017 ◽  
Author(s):  
P. J. Huffman ◽  
J. Ferreira ◽  
J.A.F.O. Correia ◽  
A.M.P. De Jesus ◽  
G. Lesiuk ◽  
...  
Keyword(s):  
Fatigue Crack ◽  
Energy Density ◽  
Fatigue Crack Growth ◽  
Crack Propagation ◽  
Crack Growth ◽  
Pressure Vessel ◽  
Strain Energy Density ◽  
Strain Energy ◽  
Propagation Model ◽  
Crack Growth Rates

Fatigue crack growth (FCG) rates have traditionally been formulated from fracture mechanics, whereas fatigue crack initiation has been empirically described using stress-life or strain-life methods. More recently, there has been efforts towards the use of the local stress-strain and similitude concepts to formulate fatigue crack growth rates. A new model has been developed which derives stress-life, strain-life and fatigue crack growth rates from strain energy density concepts. This new model has the advantage to predict an intrinsic stress ratio effect of the form ?ar=(?amp)?·(?max )(1-?), which is dependent on the cyclic stress-strain behaviour of the material. This new fatigue crack propagation model was proposed by Huffman based on Walkerlike strain-life relation. This model is applied to FCG data available for the P355NL1 pressure vessel steel. A comparison of the experimental results and the Huffman crack propagation model is made.

scholarly journals Improved computation method in residual life estimation of structural components

2013 ◽  
Vol 40 (2) ◽  
pp. 247-261
Author(s):  
Stevan Maksimovic ◽  
Katarina Maksimovic
Keyword(s):  
Fatigue Crack ◽  
Energy Density ◽  
Fatigue Crack Growth ◽  
Crack Growth ◽  
Crack Closure ◽  
Strain Energy Density ◽  
Strain Energy ◽  
Computation Method ◽  
Structural Components

This work considers the numerical computation methods and procedures for the fatigue crack growth predicting of cracked notched structural components. Computation method is based on fatigue life prediction using the strain energy density approach. Based on the strain energy density (SED) theory, a fatigue crack growth model is developed to predict the lifetime of fatigue crack growth for single or mixed mode cracks. The model is based on an equation expressed in terms of low cycle fatigue parameters. Attention is focused on crack growth analysis of structural components under variable amplitude loads. Crack growth is largely influenced by the effect of the plastic zone at the front of the crack. To obtain efficient computation model plasticity-induced crack closure phenomenon is considered during fatigue crack growth. The use of the strain energy density method is efficient for fatigue crack growth prediction under cyclic loading in damaged structural components. Strain energy density method is easy for engineering applications since it does not require any additional determination of fatigue parameters (those would need to be separately determined for fatigue crack propagation phase), and low cyclic fatigue parameters are used instead. Accurate determination of fatigue crack closure has been a complex task for years. The influence of this phenomenon can be considered by means of experimental and numerical methods. Both of these models are considered. Finite element analysis (FEA) has been shown to be a powerful and useful tool1,6 to analyze crack growth and crack closure effects. Computation results are compared with available experimental results.

scholarly journals Technical Basis for Master Curve for Fatigue Crack Growth of Ferritic Steels in High-Pressure Gaseous Hydrogen in ASME Section VIII-3 Code

2019 ◽  
Author(s):  
Chris San Marchi ◽  
Joseph Ronevich ◽  
Paolo Bortot ◽  
Yoru Wada ◽  
John Felbaum ◽  
...  
Keyword(s):  
High Pressure ◽  
Tensile Strength ◽  
Fatigue Crack ◽  
Fatigue Crack Growth ◽  
Crack Growth ◽  
Pressure Vessel ◽  
Master Curve ◽  
Gaseous Hydrogen ◽  
Section Viii ◽  
Crack Growth Rates

Abstract The design of pressure vessels for high-pressure gaseous hydrogen service per ASME Boiler and Pressure Vessel Code Section VIII Division 3 requires measurement of fatigue crack growth rates in situ in gaseous hydrogen at the design pressure. These measurements are challenging and only a few laboratories in the world are equipped to make these measurements, especially in gaseous hydrogen at pressure in excess of 100 MPa. However, sufficient data is now available to show that common pressure vessel steels (e.g., SA-372 and SA-723) show similar fatigue crack growth rates when the maximum applied stress intensity factor is significantly less than the elastic-plastic fracture toughness. Indeed, the measured rates are sufficiently consistent that a master curve for fatigue crack growth in gaseous hydrogen can be established for steels with tensile strength less than 915 MPa. In this overview, published reports of fatigue crack growth rate data in gaseous hydrogen are reviewed. These data are used to formulate a two-part master curve for fatigue crack growth in high-pressure (106 MPa) gaseous hydrogen, following the classic power-law formulation for fatigue crack growth and a term that accounts for the loading ratio (R). The bounds on applicability of the master curve are discussed, including the relationship between hydrogen-assisted fracture and tensile strength of these steels. These data have been used in developing ASME VIII-3 Code Case 2938. Additionally, a phenomenological term for pressure can be added to the master curve and it is shown that the same master curve formulation captures the behavior of pressure vessel and pipeline steels at significantly lower pressure.

Sign in / Sign up

Export Citation Format

Share Document