Simulation on power-flow dispatching cases for Microgrid with PVS and battery energy storage system

Modern Microgrid (MG) mainly consists of distributed generators (DGs), energy storage systems (ESSs), different loads, and protection systems. Microgrid plays an important role not only to ensure the power supply reliability but also to improve the power quality in distribution network. Moreover, deployment of distributed generators such as Photovoltaic Generation System (PVS), wind turbine generation system, and energy storage systems diversifies operation and control modes of AC microgrid in order to meet local demand response. This paper studies on power-flow dispatching cases for a MG with PVS and Battery Energy Storage System (BESS), which considers the maximum power consumption generated by the PVS and minimizes the power received from the utility grid. Simulation results validate the effectiveness of BESS for actively dispatching power-flow of MG in case the PVSs cannot partially or fully meet the local demand response in peak hours. By using ETAP software, real data of the PVSs are used to do simulation and power-flow calculation for the MG, which is to evaluate the feasibility of power-flow dispatch solutions proposed in this paper.

Download Full-text

Adequacy Assessment of Wind Integrated Generating Systems Incorporating Demand Response and Battery Energy Storage System

Energies ◽

10.3390/en11102649 ◽

2018 ◽

Vol 11 (10) ◽

pp. 2649 ◽

Cited By ~ 17

Author(s):

Jiashen Teh

Keyword(s):

Energy Storage ◽

Demand Response ◽

Renewable Energy Sources ◽

Storage System ◽

Peak Load ◽

Energy Storage System ◽

Battery Energy Storage System ◽

Battery Energy Storage ◽

Battery Energy ◽

Generating System

The demand response and battery energy storage system (BESS) will play a key role in the future of low carbon networks, coupled with new developments of battery technology driven mainly by the integration of renewable energy sources. However, studies that investigate the impacts of BESS and its demand response on the adequacy of a power supply are lacking. Thus, a need exists to address this important gap. Hence, this paper investigates the adequacy of a generating system that is highly integrated with wind power in meeting load demand. In adequacy studies, the impacts of demand response and battery energy storage system are considered. The demand response program is applied using the peak clipping and valley filling techniques at various percentages of the peak load. Three practical strategies of the BESS operation model are described in this paper, and all their impacts on the adequacy of the generating system are evaluated. The reliability impacts of various wind penetration levels on the generating system are also explored. Finally, different charging and discharging rates and capacities of the BESS are considered when evaluating their impacts on the adequacy of the generating system.

Download Full-text

Design and simulation of a microgrid for TIH campus

Indonesian Journal of Electrical Engineering and Computer Science ◽

10.11591/ijeecs.v19.i2.pp729-736 ◽

2020 ◽

Vol 19 (2) ◽

pp. 729

Author(s):

Zaid H. Ali ◽

Ziyaad H. Saleh ◽

Raid W. Daoud ◽

Ahmed H. Ahmed

Keyword(s):

Energy Storage ◽

Storage System ◽

Energy Storage System ◽

Generation System ◽

Battery Energy Storage System ◽

Battery Energy Storage ◽

High Penetration ◽

Technical Institution ◽

Battery Energy ◽

Pv Generation

<p><span>This paper proposes a methodology for designing and operating a microgrid (MG) for the main campus of the Technical Institution Hawija. In this MG, a battery energy storage system (BESS), photovoltaic (PV) generation system, and controllable loads are included. Due to the high penetration of the PVs, over-voltage issues may occur in this MG. A novel operation strategy is considered by coordinating the BESS, PVs, and loads to prevent power outages and accomplish a secure operation of this MG. In this proposed approach, droop controllers have been implemented to provide the appropriate references for the PVs and BESS to maintain the voltage of the MG within a secure range. The generation of the PVs may be curtailed to guarantee the fidelity of the voltage. The intended simulations will be based on MATLAB/Simulink to show the efficacy of the intended design.</span></p><script type="text/javascript" src="https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.0/MathJax.js?config=TeX-AMS-MML_HTMLorMML&delayStartupUntil=configured"></script><script id="texAllTheThingsPageScript" type="text/javascript" src="chrome-extension://cbimabofgmfdkicghcadidpemeenbffn/js/pageScript.js"></script>

Download Full-text