CAPILLARY IMPREGNATION IN OIL RECOVERY PROCESSES

Author(s):  
A.M. Svalov ◽  
2021 ◽  
pp. 51725
Author(s):  
Conny Cerai Ferreira ◽  
Thais Barros Gomes Silva ◽  
Agatha Densy dos Santos Francisco ◽  
Lucas Bandeira ◽  
Renato D. Cunha ◽  
...  

2016 ◽  
Vol 4 (2) ◽  
pp. 69 ◽  
Author(s):  
Cristiano José de Andrade ◽  
Gláucia Maria Pastore

Worldwide oil production has been declining. Microbial enhanced oil recovery is one of the most important tertiary recovery processes. The aim of this work was to evaluate the surface activity properties of surfactin and mannosylerithritol lipids-B. In our previous studies, surfactin and mannosylerithritol lipids were produced using cassava wastewater as substrate and then purified by ultrafiltration. Thus, this work extends our previous studies. Experiments of surface activity under extreme conditions (temperature, ionic strength and pH), oil displacement, removal of oil from sand and emulsification index were carried out. Central composite rotational design was performed under extreme conditions of temperature, pH and ionic strength. The results indicated that ionic strength significantly affected the surface activity of surfactin. On the other hand, ionic strength, but also temperature and pH significantly affected the tenso activity of mannosylerithritol lipids-B. Regarding oil displacement test, mannosylerithritol lipids-B showed higher clear zone than surfactin. Contrary, in the experiments of removal of crude oil from sand, minimal differences were observed between surfactin and mannosylerithritol lipids-B. Therefore, both surfactin and mannosylerithritol lipids-B showed good surface activity under extreme conditions. In addition, it seems that mannosylerithritol lipids-B is subtly better than surfactin for microbial enhanced oil recovery.


2005 ◽  
Author(s):  
Espen Kowalewski ◽  
Ingun Rueslatten ◽  
Tony Boassen ◽  
Egil Sunde ◽  
Jan Age Stensen ◽  
...  

2012 ◽  
Vol 5 (1) ◽  
pp. 37-44 ◽  
Author(s):  
Gustavo-Adolfo Maya-Toro ◽  
Rubén-Hernán Castro-García ◽  
Zarith del Pilar Pachón-Contreras. ◽  
Jose-Francisco Zapata-Arango

Oil recovery by water injection is the most extended technology in the world for additional recovery, however, formation heterogeneity can turn it into highly inefficient and expensive by channeling injected water. This work presents a chemical option that allows controlling the channeling of important amounts of injection water in specific layers, or portions of layers, which is the main explanation for low efficiency in many secondary oil recovery processes. The core of the stages presented here is using partially hydrolyzed polyacrylamide (HPAM) cross linked with a metallic ion (Cr+3), which, at high concentrations in the injection water (5000 – 20000 ppm), generates a rigid gel in the reservoir that forces the injected water to enter into the formation through upswept zones. The use of the stages presented here is a process that involves from experimental evaluation for the specific reservoir to the field monitoring, and going through a strict control during the well intervention, being this last step an innovation for this kind of treatments. This paper presents field cases that show positive results, besides the details of design, application and monitoring.


Sign in / Sign up

Export Citation Format

Share Document