scholarly journals Predicting Beef Carcass Fatness Using an Image Analysis System

Animals ◽  
2021 ◽  
Vol 11 (10) ◽  
pp. 2897
Author(s):  
José A. Mendizabal ◽  
Guillerno Ripoll ◽  
Olaia Urrutia ◽  
Kizkitza Insausti ◽  
Beatriz Soret ◽  
...  

The amount and distribution of subcutaneous fat is an important factor affecting beef carcass quality. The degree of fatness is determined by visual assessments scored on a scale of five fatness levels (the SEUROP system). New technologies such as the image analysis method have been developed and applied in an effort to enhance the accuracy and objectivity of this classification system. In this study, 50 young bulls were slaughtered (570 ± 52.5 kg) and after slaughter the carcasses were weighed (360 ± 33.1 kg) and a SEUROP system fatness score assigned. A digital picture of the outer surface of the left side of the carcass was taken and the area of fat cover (fat area) was measured using an image analysis system. Commercial cutting of the carcasses was performed 24 h post-mortem. The fat trimmed away on cutting (cutting fat) was weighed. A regression analysis was carried out for the carcass cutting fat (y-axis) on the carcass fat area (x-axis) to establish the accuracy of the image analysis system. A greater accuracy was obtained by the image analysis (R2 = 0.72; p < 0.001) than from the visual fatness scores (R2 = 0.66; p < 0.001). These results show the image analysis to be more accurate than the visual assessment system for predicting beef carcass fatness.

1983 ◽  
Vol 57 (4) ◽  
pp. 908-917 ◽  
Author(s):  
H. R. Cross ◽  
D. A. Gilliland ◽  
P. R. Durland ◽  
S. Seideman

Author(s):  
D.S. DeMiglio

Much progress has been made in recent years towards the development of closed-loop foundry sand reclamation systems. However, virtually all work to date has determined the effectiveness of these systems to remove surface clay and metal oxide scales by a qualitative inspection of a representative sampling of sand particles. In this investigation, particles from a series of foundry sands were sized and chemically classified by a Lemont image analysis system (which was interfaced with an SEM and an X-ray energy dispersive spectrometer) in order to statistically document the effectiveness of a reclamation system developed by The Pangborn Company - a subsidiary of SOHIO.The following samples were submitted: unreclaimed sand; calcined sand; calcined & mechanically scrubbed sand and unused sand. Prior to analysis, each sample was sprinkled onto a carbon mount and coated with an evaporated film of carbon. A backscattered electron photomicrograph of a field of scale-covered particles is shown in Figure 1. Due to a large atomic number difference between sand particles and the carbon mount, the backscattered electron signal was used for image analysis since it had a uniform contrast over the shape of each particle.


Sign in / Sign up

Export Citation Format

Share Document