scholarly journals A Full-Newton AC-DC Power Flow Methodology for HVDC Multi-Terminal Systems and Generic DC Network Representation

Energies ◽  
2021 ◽  
Vol 14 (6) ◽  
pp. 1658
Author(s):  
Leandro Almeida Vasconcelos ◽  
João Alberto Passos Filho ◽  
André Luis Marques Marcato ◽  
Giovani Santiago Junqueira
Keyword(s):  
Power Systems ◽  
Direct Current ◽  
Power Flow ◽  
Large Scale ◽  
Flow Problem ◽  
Control Strategies ◽  
Problem Formulation ◽  
Expansion Planning ◽  
Dc Power ◽  
Power Flow Problem

The use of Direct Current (DC) transmission links in power systems is increasing continuously. Thus, it is important to develop new techniques to model the inclusion of these devices in network analysis, in order to allow studies of the operation and expansion planning of large-scale electric power systems. In this context, the main objective of this paper is to present a new methodology for a simultaneous AC-DC power flow for a multi-terminal High Voltage Direct Current (HVDC) system with a generic representation of the DC network. The proposed methodology is based on a full Newton formulation for solving the AC-DC power flow problem. Equations representing the converters and steady-state control strategies are included in a power flow problem formulation, resulting in an expanded Jacobian matrix of the Newton method. Some results are presented based on HVDC test systems to confirm the effectiveness of the proposed approach.

scholarly journals Application of the Multiverse Optimization Method to Solve the Optimal Power Flow Problem in Direct Current Electrical Networks

2021 ◽  
Vol 13 (16) ◽  
pp. 8703
Author(s):  
Andrés Alfonso Rosales-Muñoz ◽  
Luis Fernando Grisales-Noreña ◽  
Jhon Montano ◽  
Oscar Danilo Montoya ◽  
Alberto-Jesus Perea-Moreno
Keyword(s):  
Objective Function ◽  
Successive Approximation ◽  
Direct Current ◽  
Optimization Algorithm ◽  
Power Flow ◽  
Optimal Power Flow ◽  
Flow Problem ◽  
Distributed Generators ◽  
Optimal Power ◽  
Power Flow Problem

This paper addresses the optimal power flow problem in direct current (DC) networks employing a master–slave solution methodology that combines an optimization algorithm based on the multiverse theory (master stage) and the numerical method of successive approximation (slave stage). The master stage proposes power levels to be injected by each distributed generator in the DC network, and the slave stage evaluates the impact of each power configuration (proposed by the master stage) on the objective function and the set of constraints that compose the problem. In this study, the objective function is the reduction of electrical power losses associated with energy transmission. In addition, the constraints are the global power balance, nodal voltage limits, current limits, and a maximum level of penetration of distributed generators. In order to validate the robustness and repeatability of the solution, this study used four other optimization methods that have been reported in the specialized literature to solve the problem addressed here: ant lion optimization, particle swarm optimization, continuous genetic algorithm, and black hole optimization algorithm. All of them employed the method based on successive approximation to solve the load flow problem (slave stage). The 21- and 69-node test systems were used for this purpose, enabling the distributed generators to inject 20%, 40%, and 60% of the power provided by the slack node in a scenario without distributed generation. The results revealed that the multiverse optimizer offers the best solution quality and repeatability in networks of different sizes with several penetration levels of distributed power generation.

scholarly journals Solution of the Optimal Reactive Power Flow Problem Using a Discrete-Continuous CBGA Implemented in the DigSILENT Programming Language

Computers ◽  
2021 ◽  
Vol 10 (11) ◽  
pp. 151
Author(s):  
David Lionel Bernal-Romero ◽  
Oscar Danilo Montoya ◽  
Andres Arias-Londoño
Keyword(s):  
Power Systems ◽  
Programming Language ◽  
Power Flow ◽  
Reactive Power ◽  
Flow Problem ◽  
Computational Effort ◽  
Power Losses ◽  
Reactive Power Flow ◽  
Power Flow Problem ◽  
Optimal Reactive Power Flow

The problem of the optimal reactive power flow in transmission systems is addressed in this research from the point of view of combinatorial optimization. A discrete-continuous version of the Chu & Beasley genetic algorithm (CBGA) is proposed to model continuous variables such as voltage outputs in generators and reactive power injection in capacitor banks, as well as binary variables such as tap positions in transformers. The minimization of the total power losses is considered as the objective performance indicator. The main contribution in this research corresponds to the implementation of the CBGA in the DigSILENT Programming Language (DPL), which exploits the advantages of the power flow tool at a low computational effort. The solution of the optimal reactive power flow problem in power systems is a key task since the efficiency and secure operation of the whole electrical system depend on the adequate distribution of the reactive power in generators, transformers, shunt compensators, and transmission lines. To provide an efficient optimization tool for academics and power system operators, this paper selects the DigSILENT software, since this is widely used for power systems for industries and researchers. Numerical results in three IEEE test feeders composed of 6, 14, and 39 buses demonstrate the efficiency of the proposed CBGA in the DPL environment from DigSILENT to reduce the total grid power losses (between 21.17% to 37.62% of the benchmark case) considering four simulation scenarios regarding voltage regulation bounds and slack voltage outputs. In addition, the total processing times for the IEEE 6-, 14-, and 39-bus systems were 32.33 s, 49.45 s, and 138.88 s, which confirms the low computational effort of the optimization methods directly implemented in the DPL environment.

Comparison Between Linear and Nonlinear Governor Power Flow Formulations

2020 ◽  
Vol 21 (2) ◽  
Author(s):  
João Alberto Passos Filho ◽  
Othon Ferreira Avila ◽  
Paula Oliveira La Gatta
Keyword(s):  
New England ◽  
Power Flow ◽  
Flow Model ◽  
Flow Problem ◽  
Active Power ◽  
Droop Control ◽  
Dc Power ◽  
Linear And Nonlinear ◽  
System Frequency ◽  
Power Flow Problem

AbstractThe main objective of this paper is to review and compare two methodologies to solve the power flow problem considering active power generation droop control. The first methodology is based on a DC power flow model, and the second one is based on a conventional full Newton power flow formulation. The study of two test systems is used to validate the proposed analysis; the first one is the 11-bus system with two distinct areas, and the second one is the 39-bus New England power system. The results presented validate and indicate the effectiveness of the DC power flow approach in order to estimate the steady-state system frequency deviations.

Sign in / Sign up

Export Citation Format

Share Document