scholarly journals Optimal Integration of Capacitor and Distributed Generation in Distribution System Considering Load Variation Using Bat Optimization Algorithm

Energies ◽  
2021 ◽  
Vol 14 (12) ◽  
pp. 3548
Author(s):  
Thangaraj Yuvaraj ◽  
Kaliaperumal Rukmani Devabalaji ◽  
Natarajan Prabaharan ◽  
Hassan Haes Alhelou ◽  
Asokkumar Manju ◽  
...  
Keyword(s):  
Distributed Generation ◽  
Distribution System ◽  
Power Loss ◽  
Distribution Systems ◽  
Peak Load ◽  
Test System ◽  
Sensitivity Factor ◽  
Optimal Size ◽  
Step Size ◽  
Light Load

In this article, an efficient long-term novel scheduling technique is proposed for allocating capacitors in a combined system involving distributed generation (DG) along with radial distribution systems (RDS). We introduce a unique multi-objective function that focuses on the reduction of power loss with the maximization of voltage stability index (VSI) subjected to constraints of equality and inequality systems. Loss sensitivity factor and VSI together are involved in pre-identifying the locations of capacitors and DG. Determination of the optimal size of capacitor and DG is performed by utilizing the Bat algorithm (BA) for all the loads in RDS. The conventional approach considers the medium load of (1.0) condition generally, but the proposed method changes the feeder loads linearly, ranging from light load (0.5) to peak load (1.6) with the value of step size as 1%. BA determines the optimal size of the capacitor and DG for each step load. The curve fitting technique is used for deducing the generalized equation of capacitor size and DG for all conditions of the load with the various loading condition sized by distributed network operators (DNOs). Further, various load models such as industrial, residential, and commercial loads have been considered to show the efficiency of the present approach. Validation of results is performed in different scenarios on a 69-bus test system and on a standard IEEE 33-bus system. The results exhibit improved accuracy with less power loss value, superior bus voltage, and stability of system voltage with a higher rate of convergence.

scholarly journals Recloser-Fuse settings in distribution systems with optimizing multiple distributed generation considering technical aspects

2020 ◽  
Vol 17 (3) ◽  
pp. 1135
Author(s):  
Ahmed Mohamed Abdelbaset ◽  
AboulFotouh A. Mohamed ◽  
Essam Abou El-Zahab ◽  
M. A. Moustafa Hassan
Keyword(s):  
Distributed Generation ◽  
Distribution System ◽  
Power Loss ◽  
Distribution Systems ◽  
Test System ◽  
Optimal Size ◽  
Loss Reduction ◽  
Voltage Profile ◽  
Power Loss Reduction ◽  
System Power

<p><span>With the widespread of using distributed generation, the connection of DGs in the distribution system causes miscoordination between protective devices. This paper introduces the problems associated with recloser fuse miscoordination (RFM) in the presence of single and multiple DG in a radial distribution system. Two Multi objective optimization problems are presented. The first is based on technical impacts to determine the optimal size and location of DG considering system power loss reduction and enhancement the voltage profile with a certain constraints and the second is used for minimizing the operating time of all fuses and recloser with obtaining the optimum settings of fuse recloser coordination characteristics. Whale Optimizer algorithm (WOA) emulated RFM as an optimization problem. The performance of the proposed methodology is applied to the standard IEEE 33 node test system. The results show the robustness of the proposed algorithm for solving the RFM problem with achieving system power loss reduction and voltage profile enhancement.</span></p>

scholarly journals Continuous domain ant colony optimization for distributed generation placement and losses minimization

2020 ◽  
Vol 9 (2) ◽  
pp. 261
Author(s):  
Zulkiffli Abdul Hamid ◽  
Ismail Musirin ◽  
Ammar Yasier Azman ◽  
Muhammad Murtadha Othman
Keyword(s):  
Ant Colony Optimization ◽  
Distributed Generation ◽  
Distribution System ◽  
Power Loss ◽  
Test System ◽  
Ant Colony ◽  
Optimal Size ◽  
Voltage Profile ◽  
Radial Distribution System ◽  
Continuous Domain

This paper proposes a method for distributed generation (DG) placement in distribution system for losses minimization and voltage profile improvement. An IEEE 33-bus radial distribution system is used as the test system for the placement of DG. To facilitate the sizing of DG capacity, a meta-heuristic algorithm known as Continuous Domain Ant Colony Optimization (ACO<sub>R</sub>) is implemented. The ACO<sub>R</sub> is a modified version of the traditional ACO which was developed specially for solving continuous domain optimization problem like sizing a set of variables. The objective of this paper is to determine the optimal size and location of DG for power loss minimization and voltage profile mitigation. Three case studies were conducted for the purpose of verification. It was observed that the proposed technique is able to give satisfactory results of real power loss and voltage profile at post-optimization condition. Experiment under various loadings of the test system further justifies the objective of the study.

scholarly journals Enhanced sunflower optimization for placement distributed generation in distribution system

2021 ◽  
Vol 11 (1) ◽  
pp. 107
Author(s):  
Thuan Thanh Nguyen
Keyword(s):  
Distributed Generation ◽  
Distribution System ◽  
Power Loss ◽  
Optimization Problem ◽  
Test System ◽  
Loss Reduction ◽  
Power Loss Reduction ◽  
Distribution Generation

Installation of distribution generation (DG) in the distribution system gains many technical benefits. To obtain more benefits, the location and size of DG must be selected with the appropriate values. This paper presents a method for optimizing location and size of DG in the distribution system based on enhanced sunflower optimization (ESFO) to minimize power loss of the system. In which, based on the operational mechanisms of the original sunflower optimization (SFO), a mutation technique is added for updating the best plant. The calculated results on the 33 nodes test system have shown that ESFO has proficiency for determining the best location and size of DG with higher quality than SFO. The compared results with the previous methods have also shown that ESFO outperforms to other methods in term of power loss reduction. As a result, ESFO is a reliable approach for the DG optimization problem.

scholarly journals Reliability worth Assessment of Active Distribution System Considering Protective Devices and Multiple Distributed Generation Units

2018 ◽  
Vol 7 (2) ◽  
pp. 111
Author(s):  
Subramanya Sarma S ◽  
V. Madhusudhan ◽  
V. Ganesh
Keyword(s):  
Distributed Generation ◽  
Distribution System ◽  
Distribution Systems ◽  
Renewable Energy Sources ◽  
Distribution Networks ◽  
Research Area ◽  
Test System ◽  
Primary Concern ◽  
Reliability Indices ◽  
New Research

<p>Reliability worth assessment is a primary concern in planning and designing of electrical distribution systems those operate in an economic manner with minimal interruption of electric supply to customer loads. Renewable energy sources (RES) based Distributed Generation (DG) units can be forecasted to penetrate in distribution networks due to advancement in their technology. The assessment of reliability worth of DG enhanced distribution networks is a relatively new research area. This paper proposes a methodology that can be used to analyze the reliability of active distribution systems (DG enhanced distribution system) and can be applied in preliminary planning studies to compute the reliability indices and statistics. The reliability assessment in this work is carried out with analytical approach applied on a test system and simulated results validate that installation of distributed generators can improve the distribution system reliability considerably.</p>

scholarly journals Optimal Placement and Sizing of Distributed Generation in Distribution System using Analytical Method

2019 ◽  
Vol 8 (4) ◽  
pp. 6357-6363
Keyword(s):  
Distributed Generation ◽  
Distribution System ◽  
Power Loss ◽  
Distribution Network ◽  
Optimal Placement ◽  
Small Scale ◽  
Voltage Profile ◽  
Distribution Grid ◽  
Step Size ◽  
System Power

The reliability of distribution network can be improved with the penetration of small scale distributed generation (DG) unit to the distribution grid. Nevertheless, the location and sizing of the DG in the distribution network have always become a topic of debate. This problem arises as different capacity of DG at various location can affect the performance of the entire system. The main objective of this study is to recommend a suitable size of DG to be placed at the most appropriate location for better voltage profile and minimum power loss. Therefore, this paper presents an analytical approach with a fixed DG step size of 500 kW up to 4500 kW DG to analyses the effect of a single P-type DG in IEEE 33 bus system with consideration of system power loss and voltage profile. Four scenarios have been selected for discussions where Scenario 1: 3500 kW DG placed at node 3; Scenario 2: 2500 kW DG placed at node 6; Scenario 3: 1000 kW DG placed at node 18 and Scenario 4: 3000 kW DG placed at node 7. Results show that all the four scenarios are able to reduce the power loss and improve the voltage profile however Scenario 4 has better performance where it complies with minimum voltage requirement and minimizing the system power loss.

scholarly journals Power Loss Minimization and Voltage Stability Improvement in Electrical Distribution System via Network Reconfiguration and Distributed Generation Placement Using Novel Adaptive Shuffled Frogs Leaping Algorithm

Energies ◽  
2019 ◽  
Vol 12 (3) ◽  
pp. 553 ◽  
Author(s):  
Arun Onlam ◽  
Daranpob Yodphet ◽  
Rongrit Chatthaworn ◽  
Chayada Surawanitkun ◽  
Apirat Siritaratiwat ◽  
...  
Keyword(s):  
Distributed Generation ◽  
Distribution System ◽  
Power Loss ◽  
Distribution Systems ◽  
Voltage Stability ◽  
Network Reconfiguration ◽  
Loss Minimization ◽  
Power Loss Minimization ◽  
Electrical Distribution ◽  
Power Loss Reduction

This paper proposes a novel adaptive optimization algorithm to solve the network reconfiguration and distributed generation (DG) placement problems with objective functions including power loss minimization and voltage stability index (VSI) improvement. The proposed technique called Adaptive Shuffled Frogs Leaping Algorithm (ASFLA) was performed for solving network reconfiguration and DG installation in IEEE 33- and 69-bus distribution systems with seven different scenarios. The performance of ASFLA was compared to that of other algorithms such as Fireworks Algorithm (FWA), Adaptive Cuckoo Search Algorithm (ACSA) and Shuffled Frogs Leaping Algorithm (SFLA). It was found that the power loss and VSI provided by ASFLA were better than those given by FWA, ACSA and SFLA in both 33- and 69-bus systems. The best solution of power loss reduction and VSI improvement of both 33- and 69-bus systems was achieved when the network reconfiguration with optimal sizing and the location DG were simultaneously implemented. From our analysis, it was indicated that the ASFLA could provide better solutions than other methods since the generating process, local and global searching of this algorithm were significantly improved from a conventional method. Hence, the ASFLA becomes another effective algorithm for solving network reconfiguration and DG placement problems in electrical distribution systems.

scholarly journals Embedded adaptive mutation evolutionary programming for distributed generation management

2019 ◽  
Vol 16 (1) ◽  
pp. 364
Author(s):  
Muhammad Fathi Mohd Zulkefli ◽  
Ismail Musirin ◽  
Shahrizal Jelani ◽  
Mohd Helmi Mansor ◽  
Naeem M. S. Honnoon
Keyword(s):  
Distribution System ◽  
Power Loss ◽  
Renewable Energy Sources ◽  
Distribution Network ◽  
Evolutionary Programming ◽  
Test System ◽  
Optimal Location ◽  
Adaptive Mutation ◽  
Optimal Size ◽  
Real Power

<span>Distribution generation (DG) is a widely used term to describe additional supply to a power system network. Normally, DG is installed in distribution network because of its small capacity of power. Number of DGs connected to distribution system has been increasing rapidly as the world heading to increase their dependency on renewable energy sources. In order to handle this high penetration of DGs into distribution network, it is crucial to place the DGs at optimal location with optimal size of output. This paper presents the implementation of Embedded Adaptive Mutation Evolutionary Programming technique to find optimal location and sizing of DGs in distribution network with the objective of minimizing real power loss. 69-Bus distribution system is used as the test system for this implementation. From the presented case studies, it is found that the proposed embedded optimization technique successfully determined the optimal location and size of DG units to be installed in the distribution network so that the real power loss is reduced.</span>

scholarly journals MINIMIZING POWER LOSS BY PLACING DG OPTIMALLY IN DISTRIBUTION SYSTEM BY PSO TECHNIQUE

2021 ◽  
Vol 6 (4) ◽  
Author(s):  
Prakash D B ◽  
Lakshminarayana C
Keyword(s):  
Particle Swarm Optimization ◽  
Objective Function ◽  
Distributed Generation ◽  
Distribution System ◽  
Power Loss ◽  
Distribution Systems ◽  
Active Power ◽  
Optimal Placement ◽  
Swarm Optimization ◽  
Intelligence Technique

— This paper presents optimal placement and sizing of Distributed Generation (DG) by using an intelligence technique called Particle Swarm Optimization (PSO). Here the objective function is considered as minimization of active power loss. The proposed methodology is applied and tested for IEEE 33 and IEEE 69 bus radial distribution systems. The result shows that the proposed algorithm is more effective.

scholarly journals Power Quality Enhancement by Integrating Distributed Generation in Distribution System

2018 ◽  
Vol 7 (4.24) ◽  
pp. 167
Author(s):  
Mr. Rajesh Kumar Samala ◽  
Dr. K Mercy Rosalina
Keyword(s):  
Power Quality ◽  
Distributed Generation ◽  
Distribution System ◽  
Power Loss ◽  
Bat Algorithm ◽  
Optimal Placement ◽  
Optimal Size ◽  
Voltage Profile ◽  
Real Power ◽  
Optimal Capacity

This research is to enhance the quality of power by reduce real power loss in distribution system and enables voltage profile enhancement at each bus. This will achieve by integrating Distributed Generation (DG) in optimal place with suitable size. In order to overcome the disadvantage of sluggish convergence of conventional algorithms the BAT Algorithm (BA) is used. In this paper the week buses are finding by using Backward/Forward (BW/FW) sweep approach based on real power loss. Later by using BA approach determination of optimal capacity and location will be done. This optimal size and location will leads to great minimization in real power loss and improvement of voltage at each bus. In this research the wind energy and Photo Voltaic (PV) energies are consider as DGs. This research is to determine the advantage of the proposed analysis on IEEE-69 radial bus using MATLAB software. The results were evaluated with the GSA approach existing in literature. Finally simulation outcomes prove that the proposed approach performance is superior in enhancing the power quality by optimal placement of DG and capacity of the DG.

scholarly journals Optimum Simultaneous Distributed Generation Units Insertion and Distribution Network Reconfiguration Using Salp Swarm Algorithm

2020 ◽  
Vol 38 (11A) ◽  
pp. 1730-1743
Author(s):  
Ahmed H. Mashal ◽  
Rashid H. AL-Rubayi ◽  
Mohammed K. Abd
Keyword(s):  
Distributed Generation ◽  
Distribution System ◽  
Power Loss ◽  
Distribution Network ◽  
Test System ◽  
Network Reconfiguration ◽  
Salp Swarm Algorithm ◽  
Voltage Deviation ◽  
Swarm Algorithm ◽  
Recovery Voltage

Contemporary researches offer that most researchers have concentrated on either network reconfiguration or Distributed Generation (DG) units insertion for boosting the performance of the distribution system (DS). However, very few researchers have been studied optimum simultaneous distributed generation units insertion and distribution networks reconfiguration (OSDGIR). In this paper, the stochastic meta-heuristic technique belong to swarm intelligence algorithms is proposed. Salp Swarm Algorithm (SSA) is inspired by the behavior of salps when navigating and foraging in the depth of the ocean. It utilized in solving OSDGIR. The objective function is to reduce power loss and voltage deviation in the Distribution System. The SSA is carried out on two different systems: IEEE 33-bus and local Iraqi radial (AL-Fuhood distribution network). Three cases are implemented; only reconfiguration, only DG units insertion, and OSDGIR. Promising results were obtained, where that power loss reduced by 93.1% and recovery voltage index enhanced by 5.4% for the test system and by 78.77% reduction in power loss and 8.2% improvement in recovery voltage for AL-Fuhood distribution network after applying OSDGIR using SSA. Finally, SSA proved effectiveness after an increase in test system loads by different levels in terms of reduced power loss and voltage deviation comparison with other methods

Sign in / Sign up

Export Citation Format

Share Document