scholarly journals NAM-NMM Temperature Downscaling Using Personal Weather Stations to Study Urban Heat Hazards

GeoHazards ◽  
2021 ◽  
Vol 2 (3) ◽  
pp. 257-276
Author(s):  
Martina Calovi ◽  
Weiming Hu ◽  
Guido Cervone ◽  
Luca Delle Monache

Rising temperatures worldwide pose an existential threat to people, properties, and the environment. Urban areas are particularly vulnerable to temperature increases due to the heat island effect, which amplifies local heating. Throughout the world, several megacities experience summer temperatures that stress human survival. Generating very high-resolution temperature forecasts is a fundamental problem to mitigate the effects of urban warming. This paper uses the Analog Ensemble technique to downscale existing temperature forecast from a low resolution to a much higher resolution using private weather stations. A new downscaling approach, based on the reuse of the Analog Ensemble (AnEn) indices, resulted by the combination of days and Forecast Lead Time (FLT)s, is proposed. Specifically, temperature forecasts from the NAM-NMM Numerical Weather Prediction model at 12 km are downscaled using 83 Private Weather Stations data over Manhattan, New York City, New York. Forecasts for 84 h are generated, hourly for the first 36 h, and every three hours thereafter. The results are dense forecasts that capture the spatial variability of ambient conditions. The uncertainty associated with using non-vetted data is addressed.

2019 ◽  
Vol 141 (6) ◽  
Author(s):  
Harold Gamarro ◽  
Jorge E. Gonzalez ◽  
Luis E. Ortiz

Recent developments in the weather research and forecasting (WRF) model have made it possible to accurately estimate incident solar radiation. This study couples the WRF-solar modifications with a multilayer urban canopy and building energy model (BEM) to create a unified WRF forecasting system called urban WRF–solar (uWRF-solar). This paper tests the integrated approach in the New York City (NYC) metro region as a sample case. Hourly forecasts are validated against ground station data collected at ten different sites in and around the city. Validation is carried out independently for clear, cloudy, and overcast sky conditions. Results indicate that the uWRF-solar model can forecast solar irradiance considerably well for the global horizontal irradiance (GHI) with an R2 value of 0.93 for clear sky conditions, 0.61 for cloudy sky conditions, and finally, 0.39 for overcast conditions. Results are further used to directly forecast solar power production in the region of interest, where evaluations of generation potential are done at the city scale. Outputs show a gradient of power generation produced by the potential available solar energy on the entire uWRF-solar grid. In total, the city has a city photovoltaic (PV) potential of 118 kWh/day/m2 and 3.65 MWh/month/m2.


Energies ◽  
2020 ◽  
Vol 13 (4) ◽  
pp. 954 ◽  
Author(s):  
Hanne Kauko ◽  
Daniel Rohde ◽  
Armin Hafner

District heating enables an economical use of energy sources that would otherwise be wasted to cover the heating demands of buildings in urban areas. For efficient utilization of local waste heat and renewable heat sources, low distribution temperatures are of crucial importance. This study evaluates a local heating network being planned for a new building area in Trondheim, Norway, with waste heat available from a nearby ice skating rink. Two alternative supply temperature levels have been evaluated with dynamic simulations: low temperature (40 °C), with direct utilization of waste heat and decentralized domestic hot water (DHW) production using heat pumps; and medium temperature (70 °C), applying a centralized heat pump to lift the temperature of the waste heat. The local network will be connected to the primary district heating network to cover the remaining heat demand. The simulation results show that with a medium temperature supply, the peak power demand is up to three times higher than with a low temperature supply. This results from the fact that the centralized heat pump lifts the temperature for the entire network, including space and DHW heating demands. With a low temperature supply, heat pumps are applied only for DHW production, which enables a low and even electricity demand. On the other hand, with a low temperature supply, the district heating demand is high in the wintertime, in particular if the waste heat temperature is low. The choice of a suitable supply temperature level for a local heating network is hence strongly dependent on the temperature of the available waste heat, but also on the costs and emissions related to the production of district heating and electricity in the different seasons.


2014 ◽  
Vol 50 (11) ◽  
pp. 8982-8996 ◽  
Author(s):  
Alla Yurova ◽  
Mikhail Tolstykh ◽  
Mats Nilsson ◽  
Andrey Sirin

Sign in / Sign up

Export Citation Format

Share Document