scholarly journals Precise Correlation of Contact Area and Forces in the Unstable Friction between a Rough Fluoroelastomer Surface and Borosilicate Glass

Materials ◽  
2020 ◽  
Vol 13 (20) ◽  
pp. 4615
Author(s):  
Chao Wang ◽  
Shabnam Z. Bonyadi ◽  
Florian Grün ◽  
Gerald Pinter ◽  
Andreas Hausberger ◽  
...  
Keyword(s):  
Contact Area ◽  
Low Frequency ◽  
Dynamic Contact ◽  
High Amplitude ◽  
Partial Slip ◽  
Real Contact Area ◽  
Stick Slip ◽  
The Real ◽  
Real Contact

Stick-slip friction of elastomers arises due to adhesion, high local strains, surface features, and viscous dissipation. In situ techniques connecting the real contact area to interfacial forces can reveal the contact evolution of a rough elastomer surface leading up to gross slip, as well as provide high-resolution dynamic contact areas for improving current slip models. Samples with rough surfaces were produced by the same manufacturing processes as machined seals. In this work, a machined fluoroelastomer (FKM) hemisphere was slid against glass, and the stick-slip behavior was captured optically in situ. The influence of sliding velocity on sliding behavior was studied over a range of speeds from 1 µm/s to 100 µm/s. The real contact area was measured from image sequences thresholded using Otsu’s method. The motion of the pinned region was delineated with a machine learning scheme. The first result is that, within the macroscale sticking, or pinned phase, local pinned and partial slip regions were observed and modeled as a combined contact with contributions to friction by both regions. As a second result, we identified a critical velocity below which the stick-slip motion converted from high frequency with low amplitude to low frequency with high amplitude. This study on the sliding behavior of a viscoelastic machined elastomer demonstrates a multi-technique approach which reveals precise changes in contact area before and during pinning and slip.

Contact stiffness of mating surfaces of parts under dynamic loading

2020 ◽  
pp. 57-60
Author(s):  
M.M. Matlin ◽  
V.A. Kazankin ◽  
E.N. Kazankina ◽  
A.I. Mozgunova
Keyword(s):  
Dynamic Loading ◽  
Contact Area ◽  
Contact Stiffness ◽  
Dynamic Contact ◽  
Real Contact Area ◽  
Contact Loading ◽  
The Real ◽  
Real Contact ◽  
Nominal Pressure ◽  
Plastic Hardness

The dependences of the relative real contact area of the flat contacting surfaces of steel parts on the nominal pressure under dynamic contact loading are studied. It is determined, that the real contact area under dynamic loading is less than under static one. Keywords dynamic plastic hardness, contact approach, real contact area, contact stiffness. [email protected]

scholarly journals Relationship between the real contact behavior and tribological characteristics of cotton fabric

Friction ◽  
2020 ◽  
Author(s):  
Rongxin Chen ◽  
Jiaxin Ye ◽  
Wei Zhang ◽  
Jiang Wei ◽  
Yan Zhang ◽  
...  
Keyword(s):  
Friction Coefficient ◽  
Contact Area ◽  
Dynamic Change ◽  
Tribological Characteristics ◽  
Real Contact Area ◽  
Cotton Fibers ◽  
Friction Behavior ◽  
Contact Behavior ◽  
The Real ◽  
Real Contact

Abstract The tribological characteristics of cotton fibers play an important role in engineering and materials science, and real contact behavior is a significant aspect in the friction behavior of cotton fibers. In this study, the tribological characteristics of cotton fibers and their relationship with the real contact behavior are investigated through reciprocating linear tribotesting and real contact analysis. Results show that the friction coefficient decreases with a general increase in load or velocity, and the load and velocity exhibit a co-influence on the friction coefficient. The dynamic change in the real contact area is recorded clearly during the experiments and corresponds to the fluctuations observed in the friction coefficient. Moreover, the friction coefficient is positively correlated with the real contact area based on a quantitative analysis of the evolution of friction behavior and the real contact area at different loads and velocities. This correlation is evident at low velocities and medium load.

An Observation Method of Real Contact Area during PVA Brush Scrubbing

2018 ◽  
Vol 282 ◽  
pp. 73-76 ◽  
Author(s):  
Toshiyuki Sanada ◽  
Masanao Hanai ◽  
Akira Fukunaga ◽  
Hirokuni Hiyama
Keyword(s):  
Contact Area ◽  
Contact Condition ◽  
Real Contact Area ◽  
Led Light ◽  
The Real ◽  
Real Contact ◽  
Observation Method

In the post CMP cleaning, the contact condition between PVA brush and surface is very important. In this study, we observed the real contact area between a brush and surface using a collimating LED light and prism. As a result, we found that the real contact area increases with increasing the brush compression. In addition, we also found that the real contact area decreases when the brush starts to move, and the brush was locally compressed due to its deformation.

scholarly journals A 3D study of the contact surface developed by the contact between the tires and the structural pavements

Exacta ◽  
2009 ◽  
Vol 6 (2) ◽  
pp. 197-208
Author(s):  
Alex Alves Bandeira ◽  
Rita Moura Fortes ◽  
João Virgílio Merighi
Keyword(s):  
Finite Element ◽  
Contact Mechanics ◽  
Contact Area ◽  
Augmented Lagrangian Method ◽  
Numerical Results ◽  
Real Contact Area ◽  
The Real ◽  
Real Contact ◽  
Commercial Program ◽  
Contact Surfaces

The basic aim in this work is to present a new technique to analyze the contact surfaces developed by the contact between the tires and the structural pavements by numerical simulations, using 3D finite element formulations with contact mechanics. For this purpose, the Augmented Lagrangian method is used. This study is performed just putting the tires on the structural pavement. These tires and the structural pavement are discretized by finite elements under large 3D elastoplastic deformation. The real loads (of aircrafts, trucks or cars) are applied directly on each tire and by contact mechanics procedures, the real contact area between the tires and the pavement surface is computed. The penetration conditions and the contact interfaces are investigated in details. Furthermore, the pressure developed at the contact surfaces is automatically calculated and transferred to the structural pavement by contact mechanics techniques. The purpose of this work research is to show that the contact area is not circular and the finite element techniques can calculate automatically the real contact area, the real geometry and its stresses and strains. In the end of this work, numerical results in terms of geometry, stress and strain are presented and compared to show the ability of the algorithm. These numerical results are also compared with the numerical results obtained by the commercial program ANSYS.

scholarly journals Measurement of Real Contact Area for Rough Metal Surfaces and the Distinction of Contribution From Elasticity and Plasticity

2020 ◽  
Vol 143 (7) ◽  
Author(s):  
Lei-Tao Li ◽  
Xuan-Ming Liang ◽  
Yu-Zhe Xing ◽  
Duo Yan ◽  
Gang-Feng Wang
Keyword(s):  
Contact Area ◽  
Rough Surfaces ◽  
Normal Load ◽  
Real Contact Area ◽  
The Real ◽  
Physical Mechanisms ◽  
Frustrated Total Internal Reflection ◽  
Real Contact ◽  
New Apparatus ◽  
Elastic And Plastic Deformation

Abstract The measurement of the real contact area between rough surfaces is one of the most challenging problems in contact mechanics and is of importance to understand some physical mechanisms in tribology. Based on the frustrated total internal reflection, a new apparatus is designed to measure the real contact area. For metallic samples with various surface topographies, the relation between normal load and the real contact area is measured. The unloading process is first considered to distinguish the contribution of elasticity and plasticity in contact with rough surfaces. It is found that both elasticity and plasticity are involved throughout the continuous loading process, different from some present understanding and assumptions that they play at different loading stages. A quantitative parameter is proposed to indicate the contribution of plasticity. The present work not only provides an experimental method to measure the real contact area but figures out how elastic and plastic deformation works in contact with rough surfaces.

Sign in / Sign up

Export Citation Format

Share Document