Calculation of Potential Radiation Doses Associated with Predisposal Management of Dismantled Steam Generators from Nuclear Power Plants

Although the generation of large components from nuclear power plants is expected to gradually increase in the future, comprehensive studies on the radiological risks of the predisposal management of large components have been rarely reported in open literature. With a view to generalizing the assessment framework for the radiological risks of the processing and transport of a representative large component—a steam generator—12 scenarios were modeled in this study based on past experiences and practices. In addition, the general pathway dose factors normalized to the unit activity concentration of radionuclides for processing and transportation were derived. Using the general pathway dose factors, as derived using the approach established in this study, a specific assessment was conducted for steam generators from a pressurized water reactor (PWR) or a pressurized heavy water reactor (PHWR) in Korea. In order to demonstrate the applicability of the developed approach, radiation doses reported from actual experiences and studies are compared to the calculated values in this study. The applicability of special arrangement transportation of steam generators assumed in this study is evaluated in accordance with international guidance. The generalized approach to assessing the radiation doses can be used to support optimizing the predisposal management of large components in terms of radiological risk.

Download Full-text

Heavy Components Replacement in Nuclear Power Plants: Guidelines and Experiences

ASME 2010 Pressure Vessels and Piping Conference: Volume 7 ◽

10.1115/pvp2010-25875 ◽

2010 ◽

Author(s):

Ki Sig Kang

Keyword(s):

Nuclear Power ◽

Power Plants ◽

Nuclear Power Plants ◽

Reactor Vessel ◽

Primary System ◽

Pressurized Water Reactor ◽

Pressurized Water ◽

Water Reactor ◽

Heavy Water Reactor ◽

Technical Innovations

Utilities are looking for ways to optimize plant lifetime, and must therefore prevent stress corrosion in primary components, while combating other phenomena, such as thermal fatigue or certain metallurgical weaknesses. The replacement of sections of the main primary system is one way of solving these problems. The increase in the number of the replacement of heavy components carried out in the reactor building on specific reactor geometries has called for major technical innovations on the replacement of heavy components. For above, the IAEA published a nuclear energy series (NES) on replacement of heavy components to propose guidance and share experiences. The major and heavy components to be considered are; 1) Steam generators for pressurized water reactor plants, 2) Reactor vessel head for PWR plants, 3) Reactor internal components for boiling water reactor plants, 4) Reactor vessel internals for PWR plants, 5) Pressurizer for PWR plants, 6) Reactor coolant piping/ recirculation piping PWR, and 7) Press Tube and feed piping for pressurized heavy water reactor. This paper is focused on heavy components replacement considered strategic aspects for nuclear power plants life management.

Download Full-text