Methods of test for petroleum and its products. Petroleum products. Determination of flash and fire points. Cleveland open cup method

Energetic properties of peat saturated with petroleum products

Safety and Reliability of Power Industry ◽

10.24223/1999-5555-2020-13-2-105-109 ◽

2020 ◽

Vol 13 (2) ◽

pp. 105-109

Author(s):

E. S. Dremicheva

Keyword(s):

Crude Oil ◽

Diesel Fuel ◽

Energy Use ◽

Experimental Studies ◽

Calorific Value ◽

Petroleum Products ◽

Ash Content ◽

Motor Oil ◽

Initial Sample

This paper presents a method of sorption using peat for elimination of emergency spills of crude oil and petroleum products and the possibility of energy use of oil-saturated peat. The results of assessment of the sorbent capacity of peat are presented, with waste motor oil and diesel fuel chosen as petroleum products. Natural peat has been found to possess sorption properties in relation to petroleum products. The sorbent capacity of peat can be observed from the first minutes of contact with motor oil and diesel fuel, and significantly depends on their viscosity. For the evaluation of thermal properties of peat saturated with petroleum products, experimental studies have been conducted on determination of moisture and ash content of as-fired fuel. It is shown that adsorbed oil increases the moisture and ash content of peat in comparison with the initial sample. Therefore, when intended for energy use, peat saturated with petroleum products is to be subjected to additional drying. Simulation of net calorific value has been performed based on the calorific values of peat and petroleum products with different ratios of petroleum product content in peat and for a saturated peat sample. The obtained results are compared with those of experiments conducted in a calorimetric bomb and recalculated for net calorific value. A satisfactory discrepancy is obtained, which amounts to about 12%. Options have been considered providing for combustion of saturated peat as fuel (burnt per se and combined with a solid fuel) and processing it to produce liquid, gaseous and solid fuels. Peat can be used to solve environmental problems of elimination of emergency spills of crude oil and petroleum products and as an additional resource in solving the problem of finding affordable energy.