scholarly journals Orthogonal Time Sequency Multiplexing Modulation: Analysis and Low-Complexity Receiver Design

2021 ◽  
Author(s):  
Tharaj Thaj ◽  
Emanuele Viterbo ◽  
Yi Hong
Keyword(s):  
Orthogonal Frequency Division Multiplexing ◽  
High Performance ◽  
Error Control ◽  
Estimation Method ◽  
Low Complexity ◽  
Modulation Scheme ◽  
Receiver Design ◽  
Error Performance ◽  
Frequency Space ◽  
Time Frequency

This paper proposes orthogonal time sequency multiplexing (OTSM), a novel single carrier modulation scheme that places information symbols in the delay-sequency domain followed by a cascade of time-division multiplexing (TDM) and Walsh-Hadamard sequence multiplexing. Thanks to the Walsh Hadamard transform (WHT), the modulation and demodulation do not require complex domain multiplications. For the proposed OTSM, we first derive the input-output relation in the delay-sequency domain and present a low complexity detection method taking advantage of zero-padding. We demonstrate via simulations that OTSM offers high performance gains over orthogonal frequency division multiplexing (OFDM) and similar performance to orthogonal time frequency space (OTFS), but at lower complexity owing to WHT. Then we propose a low complexity time-domain channel estimation method. Finally, we show how to include an outer error control code and a turbo decoder to improve error performance of the coded system.

scholarly journals Orthogonal Time Sequency Multiplexing Modulation: Analysis and Low-Complexity Receiver Design

2021 ◽  
Author(s):  
Tharaj Thaj ◽  
Emanuele Viterbo ◽  
Yi Hong
Keyword(s):  
Orthogonal Frequency Division Multiplexing ◽  
High Performance ◽  
Error Control ◽  
Estimation Method ◽  
Low Complexity ◽  
Modulation Scheme ◽  
Receiver Design ◽  
Error Performance ◽  
Frequency Space ◽  
Time Frequency

This paper proposes orthogonal time sequency multiplexing (OTSM), a novel single carrier modulation scheme that places information symbols in the delay-sequency domain followed by a cascade of time-division multiplexing (TDM) and Walsh-Hadamard sequence multiplexing. Thanks to the Walsh Hadamard transform (WHT), the modulation and demodulation do not require complex domain multiplications. For the proposed OTSM, we first derive the input-output relation in the delay-sequency domain and present a low complexity detection method taking advantage of zero-padding. We demonstrate via simulations that OTSM offers high performance gains over orthogonal frequency division multiplexing (OFDM) and similar performance to orthogonal time frequency space (OTFS), but at lower complexity owing to WHT. Then we propose a low complexity time-domain channel estimation method. Finally, we show how to include an outer error control code and a turbo decoder to improve error performance of the coded system.

scholarly journals Orthogonal Time Sequency Multiplexing Modulation: Analysis and Low-Complexity Receiver Design

2021 ◽  
Author(s):  
Tharaj Thaj ◽  
Emanuele Viterbo ◽  
Yi Hong
Keyword(s):  
Orthogonal Frequency Division Multiplexing ◽  
High Performance ◽  
Error Control ◽  
Estimation Method ◽  
Low Complexity ◽  
Modulation Scheme ◽  
Receiver Design ◽  
Error Performance ◽  
Frequency Space ◽  
Time Frequency

This paper proposes orthogonal time sequency multiplexing (OTSM), a novel single carrier modulation scheme that places information symbols in the delay-sequency domain followed by a cascade of time-division multiplexing (TDM) and Walsh-Hadamard sequence multiplexing. Thanks to the Walsh Hadamard transform (WHT), the modulation and demodulation do not require complex domain multiplications. For the proposed OTSM, we first derive the input-output relation in the delay-sequency domain and present a low complexity detection method taking advantage of zero-padding. We demonstrate via simulations that OTSM offers high performance gains over orthogonal frequency division multiplexing (OFDM) and similar performance to orthogonal time frequency space (OTFS), but at lower complexity owing to WHT. Then we propose a low complexity time-domain channel estimation method. Finally, we show how to include an outer error control code and a turbo decoder to improve error performance of the coded system.

scholarly journals Orthogonal Time Sequency Multiplexing Modulation

2021 ◽  
Author(s):  
Tharaj Thaj ◽  
Emanuele Viterbo
Keyword(s):  
Time Domain ◽  
Orthogonal Frequency Division Multiplexing ◽  
High Performance ◽  
High Mobility ◽  
Low Complexity ◽  
Modulation Scheme ◽  
Frequency Space ◽  
Time Frequency ◽  
Single Carrier ◽  
The Time Domain

This paper proposes <i>orthogonal time sequency multiplexing</i> (OTSM), a novel single carrier modulation scheme based on the well known Walsh-Hadamard transform (WHT) combined with row-column interleaving, and zero padding (ZP) between blocks in the time-domain. The information symbols in OTSM are multiplexed in the delay and sequency domain using a cascade of time-division and Walsh-Hadamard (sequency) multiplexing. By using the WHT for transmission and reception, the modulation and demodulation steps do not require any complex multiplications. We then propose two low-complexity detectors: (i) a simpler non-iterative detector based on a single tap minimum mean square time-frequency domain equalizer and (ii) an iterative time-domain detector. We demonstrate, via numerical simulations, that the proposed modulation scheme offers high performance gains over orthogonal frequency division multiplexing (OFDM) and exhibits the same performance of orthogonal time frequency space (OTFS) modulation, but with lower complexity. In proposing OTSM, along with simple detection schemes, we offer the lowest complexity solution to achieving reliable communication in high mobility wireless channels, as compared to the available schemes published so far in the literature.

scholarly journals Orthogonal Time Sequency Multiplexing Modulation

2021 ◽  
Author(s):  
Tharaj Thaj ◽  
Emanuele Viterbo
Keyword(s):  
Time Domain ◽  
Orthogonal Frequency Division Multiplexing ◽  
High Performance ◽  
High Mobility ◽  
Low Complexity ◽  
Modulation Scheme ◽  
Frequency Space ◽  
Time Frequency ◽  
Single Carrier ◽  
The Time Domain

This paper proposes <i>orthogonal time sequency multiplexing</i> (OTSM), a novel single carrier modulation scheme based on the well known Walsh-Hadamard transform (WHT) combined with row-column interleaving, and zero padding (ZP) between blocks in the time-domain. The information symbols in OTSM are multiplexed in the delay and sequency domain using a cascade of time-division and Walsh-Hadamard (sequency) multiplexing. By using the WHT for transmission and reception, the modulation and demodulation steps do not require any complex multiplications. We then propose two low-complexity detectors: (i) a simpler non-iterative detector based on a single tap minimum mean square time-frequency domain equalizer and (ii) an iterative time-domain detector. We demonstrate, via numerical simulations, that the proposed modulation scheme offers high performance gains over orthogonal frequency division multiplexing (OFDM) and exhibits the same performance of orthogonal time frequency space (OTFS) modulation, but with lower complexity. In proposing OTSM, along with simple detection schemes, we offer the lowest complexity solution to achieving reliable communication in high mobility wireless channels, as compared to the available schemes published so far in the literature.

scholarly journals Orthogonal Time Sequency Multiplexing Modulation

2021 ◽  
Author(s):  
Tharaj Thaj ◽  
Emanuele Viterbo
Keyword(s):  
Time Domain ◽  
Orthogonal Frequency Division Multiplexing ◽  
High Performance ◽  
High Mobility ◽  
Low Complexity ◽  
Modulation Scheme ◽  
Frequency Space ◽  
Time Frequency ◽  
Single Carrier ◽  
The Time Domain

This paper proposes <i>orthogonal time sequency multiplexing</i> (OTSM), a novel single carrier modulation scheme based on the well known Walsh-Hadamard transform (WHT) combined with row-column interleaving, and zero padding (ZP) between blocks in the time-domain. The information symbols in OTSM are multiplexed in the delay and sequency domain using a cascade of time-division and Walsh-Hadamard (sequency) multiplexing. By using the WHT for transmission and reception, the modulation and demodulation steps do not require any complex multiplications. We then propose two low-complexity detectors: (i) a simpler non-iterative detector based on a single tap minimum mean square time-frequency domain equalizer and (ii) an iterative time-domain detector. We demonstrate, via numerical simulations, that the proposed modulation scheme offers high performance gains over orthogonal frequency division multiplexing (OFDM) and exhibits the same performance of orthogonal time frequency space (OTFS) modulation, but with lower complexity. In proposing OTSM, along with simple detection schemes, we offer the lowest complexity solution to achieving reliable communication in high mobility wireless channels, as compared to the available schemes published so far in the literature.

scholarly journals Low Complexity Iterative Rake Decision Feedback Equalizer for Zero-Padded OTFS systems

2020 ◽  
Author(s):  
Tharaj Thaj ◽  
Emanuele Viterbo
Keyword(s):  
Orthogonal Frequency Division Multiplexing ◽  
Minimum Mean Square Error ◽  
Low Complexity ◽  
Error Correcting Codes ◽  
Decision Feedback ◽  
Maximal Ratio Combining ◽  
Modulation Scheme ◽  
Decision Feedback Equalizer ◽  
Input Output ◽  
Time Frequency

<div>This paper presents a linear complexity iterative rake detector for the recently proposed orthogonal time frequency space (OTFS) modulation scheme. The basic idea is to extract and coherently combine the received multipath components of the transmitted symbols in the delay-Doppler grid using maximal ratio combining (MRC) to improve the SNR of the combined signal. We reformulate the OTFS input-output relation in simple vector form by placing guard null symbols or zero padding (ZP) in the delay-Doppler grid and exploiting the resulting circulant property of the blocks of the channel matrix. Using this vector input-output relation we propose a low complexity iterative decision feedback equalizer (DFE) based on MRC. The performance and complexity of the proposed detector favorably compares with the state of the art message passing detector. An alternative time domain MRC based detector is also proposed for even faster detection. We further propose a Gauss-Seidel based over-relaxation parameter in the rake detector to improve the performance and the convergence speed of the iterative detection. We also show how the MRC detector can be combined with outer error-correcting codes to operate as a turbo DFE scheme to further improve the error performance. </div><div>All results are compared with a baseline orthogonal frequency division multiplexing (OFDM) scheme employing a single tap minimum mean square error (MMSE) equalizer.</div>

scholarly journals Low Complexity Iterative Rake Decision Feedback Equalizer for Zero-Padded OTFS systems

2021 ◽  
Author(s):  
Tharaj Thaj ◽  
Emanuele Viterbo
Keyword(s):  
Orthogonal Frequency Division Multiplexing ◽  
Minimum Mean Square Error ◽  
Low Complexity ◽  
Error Correcting Codes ◽  
Decision Feedback ◽  
Maximal Ratio Combining ◽  
Modulation Scheme ◽  
Decision Feedback Equalizer ◽  
Input Output ◽  
Time Frequency

<div>This paper presents a linear complexity iterative rake detector for the recently proposed orthogonal time frequency space (OTFS) modulation scheme. The basic idea is to extract and coherently combine the received multipath components of the transmitted symbols in the delay-Doppler grid using maximal ratio combining (MRC) to improve the SNR of the combined signal. We reformulate the OTFS input-output relation in simple vector form by placing guard null symbols or zero padding (ZP) in the delay-Doppler grid and exploiting the resulting circulant property of the blocks of the channel matrix. Using this vector input-output relation we propose a low complexity iterative decision feedback equalizer (DFE) based on MRC. The performance and complexity of the proposed detector favorably compares with the state of the art message passing detector. An alternative time domain MRC based detector is also proposed for even faster detection. We further propose a Gauss-Seidel based over-relaxation parameter in the rake detector to improve the performance and the convergence speed of the iterative detection. We also show how the MRC detector can be combined with outer error-correcting codes to operate as a turbo DFE scheme to further improve the error performance. </div><div>All results are compared with a baseline orthogonal frequency division multiplexing (OFDM) scheme employing a single tap minimum mean square error (MMSE) equalizer.</div>

scholarly journals Low Complexity Iterative Rake Decision Feedback Equalizer for Zero-Padded OTFS systems

2020 ◽  
Author(s):  
Tharaj Thaj ◽  
Emanuele Viterbo
Keyword(s):  
Orthogonal Frequency Division Multiplexing ◽  
Minimum Mean Square Error ◽  
Low Complexity ◽  
Error Correcting Codes ◽  
Decision Feedback ◽  
Maximal Ratio Combining ◽  
Modulation Scheme ◽  
Decision Feedback Equalizer ◽  
Input Output ◽  
Time Frequency

<div>This paper presents a linear complexity iterative rake detector for the recently proposed orthogonal time frequency space (OTFS) modulation scheme. The basic idea is to extract and coherently combine the received multipath components of the transmitted symbols in the delay-Doppler grid using maximal ratio combining (MRC) to improve the SNR of the combined signal. We reformulate the OTFS input-output relation in simple vector form by placing guard null symbols or zero padding (ZP) in the delay-Doppler grid and exploiting the resulting circulant property of the blocks of the channel matrix. Using this vector input-output relation we propose a low complexity iterative decision feedback equalizer (DFE) based on MRC. The performance and complexity of the proposed detector favorably compares with the state of the art message passing detector. An alternative time domain MRC based detector is also proposed for even faster detection. We further propose a Gauss-Seidel based over-relaxation parameter in the rake detector to improve the performance and the convergence speed of the iterative detection. We also show how the MRC detector can be combined with outer error-correcting codes to operate as a turbo DFE scheme to further improve the error performance. </div><div>All results are compared with a baseline orthogonal frequency division multiplexing (OFDM) scheme employing a single tap minimum mean square error (MMSE) equalizer.</div>

Resource Allocation for a Cooperative Broadband MIMO-OFDM System

2010 ◽  
pp. 382-398
Author(s):  
Ibrahim Y. Abualhaol ◽  
Mustafa M. Matalgah
Keyword(s):  
Resource Allocation ◽  
Power Distribution ◽  
Power Efficiency ◽  
Orthogonal Frequency Division Multiplexing ◽  
High Performance ◽  
Ofdm System ◽  
Frequency Space ◽  
Input Multiple Output ◽  
Power Loading ◽  
Mimo Ofdm

In this chapter, a cooperative broadband relay-based resource allocation technique is proposed for adaptive bit and power loading multiple-input-multiple-output/orthogonal frequency division multiplexing (MIMO-OFDM) system. In this technique, sub-channels allocation, M-QAM modulation order, and power distribution among different sub-channels in the relay-based MIMO-OFDM system are jointly optimized according to the channel state information (CSI) of the relay and the direct link. The transmitted stream of bits is divided into two parts according to a suggested cooperative protocol that is based on sub-channel-division. In this protocol, the first part is sent directly from the source to the destination, and the second part is relayed to the destination through an indirect link. Such a cooperative relay-based system enables us to exploit the inherent system diversities in frequency, space and time to maximize the system power efficiency. The BER performance using this cooperative sub-channel-division protocol with adaptive sub-channel assignment and adaptive bit/power loading are presented and compared with a noncooperative ones. The use of cooperation in a broadband relay-based MIMO-OFDM system showed high performance improvement in terms of BER.

Sign in / Sign up

Export Citation Format

Share Document