Erratum: Numerical Analysis of the Output Characteristics of an Intracavity Optical Parametric Oscillator with Thermal Lensing Effect

2021 ◽  
Vol 71 (4) ◽  
pp. 421-421
Author(s):  
Jin Hyeok CHOI ◽  
Gyu Ug KIM*
Keyword(s):  
Numerical Analysis ◽  
Optical Parametric Oscillator ◽  
Parametric Oscillator ◽  
Thermal Lensing ◽  
Optical Parametric ◽  
Lensing Effect ◽  
Thermal Lensing Effect ◽  
Output Characteristics

PULSED INTRACAVITY OPTICAL PARAMETRIC OSCILLATOR WITH HIGH AVERAGE POWER BASED ON PERIODICALLY POLED LiNbO3

2005 ◽  
Vol 14 (03) ◽  
pp. 383-389 ◽  
Author(s):  
KI-HO CHO ◽  
BUM KU RHEE ◽  
YUZO SASAKI ◽  
HIROMASA ITO
Keyword(s):  
Optical Parametric Oscillator ◽  
Beam Quality ◽  
Average Power ◽  
Parametric Oscillator ◽  
Average Output ◽  
Periodically Poled ◽  
Optical Parametric ◽  
Good Beam Quality ◽  
Diode Pumped ◽  
Output Characteristics

We report on output characteristics of the intracavity optical parametric oscillator at the degenerate wavelength of 2.128 μm based on 1-mm-thick PPLN pumped with 1064-nm pulses of a cw-diode-pumped, acousto-optically Q-switched Nd:YAG laser at 10 kHz repetition rate. A stable and high average output power as high as 6 W with a good beam quality of circular shape was attained without photorefractive damage at the crystal temperature of 143°C. We also observed pump-clamping effect with a singly resonant intracavity length of 5 cm and a pump pulse of 70-ns duration.

Output characteristics of a singly-resonant optical parametric oscillator: Dependence on the variation of the signal and idler output coupling

2015 ◽  
Vol 24 (01) ◽  
pp. 1550009 ◽  
Author(s):  
Seungmin Lee ◽  
Bum Ku Rhee
Keyword(s):  
Optical Parametric Oscillator ◽  
Parametric Oscillator ◽  
Output Coupling ◽  
Crystal Surfaces ◽  
Double Pass ◽  
Periodically Poled ◽  
Optical Parametric ◽  
Output Characteristics ◽  
Resonant Optical Parametric Oscillator ◽  
Mg Doped

Output characteristics of a double-pass singly-resonant optical parametric oscillator (SRO) resonant for both signal and idler waves are investigated as a function of reflectivity of the output coupler based on periodically poled Mg -doped stoichiometric LiTaO 3( PPMgSLT ) with a period of 32.7 μm. A configuration of plane-parallel two-mirror cavity is employed and the crystal surfaces are not coated. The SRO was pumped by a Nd :YAG laser which provides 85 ns-long-pulses with a repetition rate of 10 kHz. In our experiment, the wavelengths of signal and idler are 1.98 and 2.3 μm and the maximum available pump power is ~ 21 W. Maximum average powers (conversion efficiency) of the total, the signal and the idler are 12.2 W (59%), 7 W (34%) and 5.6 W (27%), respectively.

Output Characteristics of the Nd:YAG/KTP Intracavity Optical Parametric Oscillator at 1.57 $mu$m

2015 ◽  
Vol 65 (3) ◽  
pp. 291-296
Author(s):  
Gyu Ug KIM* ◽  
Han Tae CHOO ◽  
Cha Gon PARK ◽  
Kun Hee RHYEE
Keyword(s):  
Optical Parametric Oscillator ◽  
Parametric Oscillator ◽  
Optical Parametric ◽  
Output Characteristics
Sign in / Sign up

Export Citation Format

Share Document