Texture Evolution of Ferritic (AlSl 430) Stainless Steel Strips during Cold Rolling, Annealing and Drawing

2007 ◽  
pp. 4926-4931
Author(s):  
A. Ferreira Filho ◽  
C. Herrera ◽  
Nelson Batista de Lima ◽  
R.L. Plaut ◽  
Angelo Fernando Padilha
Keyword(s):  
Stainless Steel ◽  
Cold Rolling ◽  
Texture Evolution ◽  
Steel Strips ◽  
430 Stainless Steel

Texture Evolution of Ferritic (AlSl 430) Stainless Steel Strips during Cold Rolling, Annealing and Drawing

2007 ◽  
Vol 539-543 ◽  
pp. 4926-4931 ◽  
Author(s):  
A. Ferreira Filho ◽  
C. Herrera ◽  
Nelson Batista de Lima ◽  
R.L. Plaut ◽  
Angelo Fernando Padilha
Keyword(s):  
Stainless Steel ◽  
Cold Rolling ◽  
Stainless Steels ◽  
Deep Drawing ◽  
Texture Evolution ◽  
Steel Mill ◽  
Ferritic Stainless Steels ◽  
430 Stainless Steel ◽  
Cold Rolled ◽  
Aisi 430

The evolution of the crystallographic texture of ferritic stainless steels, starting from the as received (hot rolled) condition from the steel mill, going through cold rolling, annealing and final stamping is analyzed in this paper. Two ferritic stainless steels (Nb stabilized) having a thickness of 3.0 and 0.7mm, have been employed. The thicker one has been cold rolled to 40 and 73% thickness reduction, annealed at 750 and 850°C for 1 hour. The thinner one, with a similar composition, has been 77% cold rolled and annealed at 870°C at the steel plant and subsequently submitted to deep drawing in order to evaluate texture and drawability. Texture has been evaluated using DRX in the as received, cold rolled, annealed and after drawing conditions. Drawability has been evaluated using tensile testing in order to obtain the FLC curves. AISI 430 stainless steel, in the as received condition presented a strong {100} texture in the <110> and <120> directions and the gamma fiber. After cold rolling, the material presented stronger gamma and weaker alpha fibers. Annealing of the cold rolled samples conduced to the vanishing of the alpha and strengthening of the gamma fiber, adequate for deep drawing operations. In spite of the AISI 430 of 0.7mm having presented a strong gamma fiber, other deep drawing properties were not adequate and the material cracked during stamping.

scholarly journals PVD coated mill rolls for cold rolling of stainless steel strips—Tribological and mechanical laboratory tests

2013 ◽  
Vol 15 (1) ◽  
pp. 77-86 ◽  
Author(s):  
Choumad Ould ◽  
Xavier Badiche ◽  
Pierre Montmitonnet ◽  
Yves Gachon
Keyword(s):  
Stainless Steel ◽  
Cold Rolling ◽  
Laboratory Tests ◽  
Steel Strips

scholarly journals Application of Recrystallization Texture Evolution Model to Type 430 Stainless-Steel Strip Production

2012 ◽  
Vol 53 (11) ◽  
pp. 1837-1846 ◽  
Author(s):  
Toshiharu Morimoto ◽  
Fuyuki Yoshida ◽  
Yuji Kusumoto ◽  
Masahiko Oda ◽  
Jun Yanagimoto
Keyword(s):  
Stainless Steel ◽  
Recrystallization Texture ◽  
Texture Evolution ◽  
Steel Strip ◽  
Evolution Model ◽  
430 Stainless Steel ◽  
Strip Production

scholarly journals Analysis of Vibration for Sendzimir Mill in Cold Rolling of Stainless Steel Strips

1992 ◽  
Vol 78 (10) ◽  
pp. 1554-1560
Author(s):  
Yuichiro WATANABE ◽  
Kazuhito KENMOCHI ◽  
Ikuo YARITA ◽  
Yasuo IZUMI ◽  
Nobuya SHIBATA
Keyword(s):  
Stainless Steel ◽  
Cold Rolling ◽  
Steel Strips ◽  
Sendzimir Mill

scholarly journals Texture evolution and phase transformation of 25Cr-6Mo-5Ni experimental duplex stainless steel during hot and cold rolling

2017 ◽  
Vol 6 (3) ◽  
pp. 232-240 ◽  
Author(s):  
Mohammad Masoumi ◽  
Francisco Evarsito Uchôa Reis ◽  
Mirela Oliveira de Castro ◽  
Miloslav Béres ◽  
Hamilton Ferreira Gomes de Abreu
Keyword(s):  
Stainless Steel ◽  
Phase Transformation ◽  
Cold Rolling ◽  
Duplex Stainless Steel ◽  
Texture Evolution ◽  
Hot And Cold Rolling
Sign in / Sign up

Export Citation Format

Share Document