Determination of Flow Characteristics and Turbulent Heat Transfer in a Ribbed Roughened Square Duct, Part 2: Numerical Simulations

2011 ◽  
Vol 110-116 ◽  
pp. 2364-2369
Author(s):  
Amin Etminan ◽  
H. Jafarizadeh ◽  
M. Moosavi ◽  
K. Akramian
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Coefficient ◽  
Flow Characteristics ◽  
Turbulence Models ◽  
Turbulent Heat Transfer ◽  
Turbulent Heat ◽  
Square Duct ◽  
Optimized Model ◽  
Rsm Model

In the part 1 of this research, some useful turbulence models presented. In that part advantages of those turbulence models has been gathered. In the next, numerical details and procedure of solution are presented in details. By use of different turbulence models, it has been found that Spallart-Allmaras predicted the lowest value of heat transfer coefficient; in contrast, RSM1 has projected the more considerable results compared with other models; besides, it has been proven that the two-equation models prominently taken lesser time than RSM model. Eventually, the RNG2 model has been introduced as the optimized model of this research; moreover.

Determination of Flow Characteristics and Turbulent Heat Transfer in a Ribbed Roughened Square Duct, Part 1: Turbulence Models

2011 ◽  
Vol 110-116 ◽  
pp. 2359-2363
Author(s):  
Amin Etminan ◽  
H. Jafarizadeh ◽  
M. Moosavi ◽  
K. Akramian
Keyword(s):  
Heat Transfer ◽  
Flow Structure ◽  
Flow Characteristics ◽  
Turbulence Models ◽  
Turbulent Heat Transfer ◽  
Turbulent Heat ◽  
Turbulent Model ◽  
Square Duct ◽  
Rans Models

Nowadays, many researchers works in fluid dynamics has been concentrated on determine the suitable turbulent model for better describing the flow structure and heat transfer characteristics in a specific problem, there are a lot of cases which are necessary about designation of an optimized turbulent model. In the present work, a ribbed roughened square duct has been investigated numerically. A two-dimensionally study has been done to evaluate the flow structure, heat transfer and computational efforts of seven turbulent RANS models, contemporaneously. In the Part 1 of this study turbulence models, which are used in these type of problems has been investigated. In the next, advantages of introduced turbulence models has been present and explained. The results of numerical simulations will be presented in the Part 2.

Turbulent Heat Transfer Computations for Rearward-Facing Steps and Sudden Pipe Expansions

1985 ◽  
Vol 107 (1) ◽  
pp. 70-76 ◽  
Author(s):  
A. M. Gooray ◽  
C. B. Watkins ◽  
Win Aung
Keyword(s):  
Heat Transfer ◽  
Reynolds Number ◽  
Fluid Dynamic ◽  
Turbulence Models ◽  
Turbulent Heat Transfer ◽  
Turbulent Heat ◽  
Streamline Curvature ◽  
Recirculating Flow ◽  
Moderate Reynolds Number ◽  
Entire Flow

Results of numerical calculations for heat transfer in turbulent recirculating flow over two-dimensional, rearward-facing steps and sudden pipe expansions are presented. The turbulence models used in the calculation are the standard k – ε model and the low-Reynolds number version of this model. The k – ε models have been improved to account for the effects of streamline curvature and pressure-strain (scalar) interactions including wall damping. A sequence of two computational passes is performed to obtain optimal results over the entire flow field. The presented results consist of computed distributions of heat transfer coefficents for several Reynolds numbers, emphasizing the low-to-moderate Reynolds number regime. The heat transfer results also include correlations of Nusselt numnber for both side and bottom walls. The computed heat transfer results and typical computed fluid dynamic results are compared with available experimental data.

Sign in / Sign up

Export Citation Format

Share Document