Ship Rust Removal Spray Painting Robot Finite Element Analysis Based on ANSYS

2013 ◽  
Vol 385-386 ◽  
pp. 721-725
Author(s):  
Shu Fang Zhou ◽  
Yi Zheng ◽  
Na Wang
Keyword(s):  
Simulation Analysis ◽  
Three Dimensional ◽  
Element Model ◽  
Motion Simulation ◽  
Three Dimensional Model ◽  
Element Analysis ◽  
Spray Painting ◽  
Painting Robot ◽  
Set Up ◽  
Stress And Strain Distribution

In this paper, the three-dimensional model of derusting spray painting robot is established with 3-D software SolidWorks; and the afinite element model of the vertical guide rail is set up with ANSYS. The static analysis is carried on, based on the motion simulation analysis result of MSC. ADAMS. Stress and strain distribution is intuitively obtained under the worst condition, which provides basis for improving strength design.

Finite Element Analysis of Key Component on Two Wheels Scooter

2014 ◽  
Vol 597 ◽  
pp. 531-534
Author(s):  
Zhi Dong Huang ◽  
Yun Pu Du ◽  
Bao Quan Liu ◽  
Guang Yang ◽  
Yu Feng Liu ◽  
...  
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Three Dimensional ◽  
Element Model ◽  
Strain Diagram ◽  
Three Dimensional Model ◽  
Element Analysis ◽  
Innovative Design ◽  
Driving System ◽  
Set Up

Based on Solidworks software, the three-dimensional model of two wheels scooter is set up. The finite element model of two wheels scooter is generated. Finite element analysis of driving system on two wheels scooter is investigated. The stress and strain of driving system is investigated. The stress diagram and the strain diagram are obtained. The method and the result can be used as a reference of innovative design of two wheels scooter.

Finite Element Analysis of Two Wheels Scooter Based on Solidworks

2014 ◽  
Vol 620 ◽  
pp. 24-27 ◽  
Author(s):  
Zhi Dong Huang ◽  
Yun Pu Du ◽  
Liang Zhao ◽  
Ke Gang Zhu ◽  
Hong Ji ◽  
...  
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Three Dimensional ◽  
Element Model ◽  
Strain Diagram ◽  
Three Dimensional Model ◽  
Element Analysis ◽  
Innovative Design ◽  
Set Up ◽  
The Finite Element Model

Based on Solidworks software, the three-dimensional model of two wheels scooter is set up. The finite element model of two wheels scooter is generated. Finite element analysis of telescopic mechanism of bar on two wheels scooter is investigated. The stress and strain of telescopic mechanism of bar is investigated. The stress diagram and the strain diagram are obtained. The method and the result can be used as a reference of innovative design of two wheels scooter.

The Application of Moldflow in Injection Mold Design of Mobile Phone Cover

2011 ◽  
Vol 228-229 ◽  
pp. 542-547
Author(s):  
Wen Jian Zhang ◽  
Qi Zhang
Keyword(s):  
Mobile Phone ◽  
Simulation Analysis ◽  
Three Dimensional ◽  
Element Model ◽  
Mold Design ◽  
Injection Mold ◽  
Three Dimensional Model ◽  
Molding Process ◽  
Injection Mold Design ◽  
Cae Technology

Based the CAE technology, the paper introduced the application of Moldflow Insight in injection mold design of mobile phone cover. First, we must preprocess the finite element model, including importing three-dimensional model, meshing, and process setting. And then, we can use preliminary simulation analysis to determine the number and location of the gate. Finally to filling, cooling, packing and warpage analysis for part which can help us to find the causes from warpage generated. By optimizing the molding process parameters, adjusting the dwell pressure and the dwell time we can get less warpage, which can meet the precision demand of parts, consequently, the result can provide gist for the mold designers to design and for the injection molding technologist to process parameter adjustment.

The Radial Fretting Character Research of the Shaft-Hub of Compress Impeller Based on Virtual Orthogonal Experiment

2014 ◽  
Vol 668-669 ◽  
pp. 289-293
Author(s):  
Xue Long Lu ◽  
Jun Sheng Zhao ◽  
Xin Zhong Huang ◽  
Shuang Yong Wang
Keyword(s):  
Orthogonal Experiment ◽  
Orthogonal Design ◽  
Three Dimensional ◽  
Element Model ◽  
Optimization Method ◽  
Three Dimensional Model ◽  
Interference Fit ◽  
Rotating Speed ◽  
Compressor Impeller ◽  
Set Up

A three-dimensional model of as haft-hub of compressor impeller was set up by Pro/E. Based on the ANSYS; the finite element model was established, using the analysis method of combining submodle and paramesh. The shaft-hub of compressor impeller was simulated by virtual orthogonal design optimization method. Based on the fact that there existed radial fretting in the shaft-hub interference fit joint, researching the influence significance order and law of interference, friction coefficient and rotating speed to the maximum unit frictional work , the average friction work and the optimized parameter were obtained. It turned out that the results of the numerical simulation and orthogonal experiment were accurate and reliable, with the friction and wear effectively reduced, certain guiding references to actual assembly process were got.

Finite Element Analysis of Resisting Explosive Loading for Mine Escape Capsule

2012 ◽  
Vol 446-449 ◽  
pp. 2206-2209
Author(s):  
Jin Long Wang
Keyword(s):  
Finite Element ◽  
Shock Waves ◽  
Simulation Analysis ◽  
Three Dimensional ◽  
Element Model ◽  
Explosive Loading ◽  
Element Analysis ◽  
Dimensional Finite Element ◽  
Simulation Results ◽  
Three Dimensional Finite Element

Three-dimensional finite element model of the mine escape capsule is established. With the different values of explosion shock waves, simulation analysis of the entry locker is performed by using ABAQUS. The simulation results indicate that the mine escape capsule is safe and available if the surge pressure of shock waves is less than 3.5Mpa.

Modal Analysis of Two Wheels Scooter Based on Solidworks

2014 ◽  
Vol 960-961 ◽  
pp. 1420-1423
Author(s):  
Zhi Dong Huang ◽  
Guo Fei Li ◽  
Juan Cong ◽  
Yun Wang ◽  
Wei Na Yu ◽  
...  
Keyword(s):  
Finite Element ◽  
Modal Analysis ◽  
Three Dimensional ◽  
Element Model ◽  
Dimensional Model ◽  
Three Dimensional Model ◽  
Dynamic Design ◽  
Driving System ◽  
Set Up ◽  
The Finite Element Model

Based on Solidworks software, the three-dimensional model of two wheels scooter is set up. The finite element model of two wheels scooter is generated. Modal analysis of driving system and telescopic mechanism of bar on two wheels scooter is investigated. The first five orders natural frequency and major modes of driving system and telescopic mechanism of bar are clarified. The method and the result can be used as a reference of dynamic design and lay foundation for calculation and analysis of dynamic response for the two wheels scooter.

Numerical Simulation Analysis of Deformation in TIG Welding of I-Steel

2011 ◽  
Vol 189-193 ◽  
pp. 2196-2199
Author(s):  
Ling Li Meng ◽  
Yan Qun Huang ◽  
Ming Liu
Keyword(s):  
Finite Element ◽  
Simulation Analysis ◽  
Three Dimensional ◽  
Element Model ◽  
Welding Parameters ◽  
Gas Tungsten Arc ◽  
Dimensional Finite Element ◽  
Welding Sequences ◽  
Set Up ◽  
Three Dimensional Finite Element

Since it is inconsistent and uncontrollable in the experiment, any variance in specimen dimensions, welding parameters and testing conditions will influence the consistency of testing results to some extent. In this paper, the Finite Element Method(FEM) is employed to solve this problem. A three-dimensional finite element model is established to simulate the deformation of I-steel during gas tungsten arc welding (TIG) with FEM software, which is set up to analysis the deformation of I-steel with different welding sequences.

The Seismic Performance Simulation Analysis on the Irregular Structure of the Castle Hotel of Dalian

2013 ◽  
Vol 663 ◽  
pp. 80-86
Author(s):  
Hai Qing Liu ◽  
Ming Ji Ma ◽  
Gui Jun Wang
Keyword(s):  
Finite Element ◽  
Seismic Response ◽  
Simulation Analysis ◽  
Three Dimensional ◽  
Time History ◽  
Element Model ◽  
Theoretical Research ◽  
Element Analysis ◽  
Disaster Experience ◽  
Irregular Structure

More and more irregular structure appears in people's lives, while the theoretical research and disaster experience show that the irregular structure in the earthquake will produce translation and torsion coupled spatial vibration, and sometimes it will cause very serious consequences. Being based on the practical engineering -the Castle Hotel of Dalian, this text makes use of finite element analysis software--- ANSYS. By analyzing the dynamic characteristics and seismic response, we get the self-vibration characteristics of the structure and the time history curve of top level displacement and acceleration of the structure under the effect of earthquake forces. The calculation results indicate that it is effective and reasonable to set up three-dimensional finite element model used for the analyzing of seismic response by ANSYS.

Dynamic Characteristic Simulation and Analysis of Blade Flutter Based on Finite Element

2013 ◽  
Vol 753-755 ◽  
pp. 973-976
Author(s):  
Li Da Zhu ◽  
Wen Wen Liu ◽  
Ji Jiang Wu ◽  
Shuai Xu ◽  
Peng Cheng Su
Keyword(s):  
Finite Element ◽  
Dynamic Characteristic ◽  
Optimization Design ◽  
Simulation Analysis ◽  
Three Dimensional ◽  
Dimensional Model ◽  
Three Dimensional Model ◽  
Element Analysis ◽  
Turbine Engine ◽  
Blade Flutter

Blade is one of the main parts of aircraft engine. Its dynamic characteristics will produce important influence on the work efficiency and the operation reliability of the turbine engine. The paper used the theory of finite element to do modal simulation analysis on the dynamic characteristic of blade flutter, aiming at the phenomenon of serious blade vibration in the process of turbine engine running. Firstly, the paper generated a three-dimensional model by using the software UG. Then the three-dimensional model was leaded into the finite element analysis software ANSYS. Simulation analysis of the model was carried out by using the Workbench module of ANSYS software. Finally, we got the former six order natural frequencies and vibration modes of the blade. In addition, we got the blade's vibration characteristics. The results of the simulation could provide numerical basis for the blades optimization design and vibration safety inspection.

Self-Vibration Characteristics Analysis of the Yingzhou Bridge

2011 ◽  
Vol 90-93 ◽  
pp. 1212-1215 ◽  
Author(s):  
Yan Zeng ◽  
Zhi Yong Wang
Keyword(s):  
Finite Element ◽  
Three Dimensional ◽  
Element Model ◽  
Element Analysis ◽  
Arch Bridge ◽  
Subspace Iteration ◽  
Characteristics Analysis ◽  
Set Up ◽  
Three Dimensional Finite Element ◽  
Main Bridge

In this paper dynamic behavior of the Ying Zhou main bridge in Luoyang is studied .The finite element analysis software ANSYS is adopted to set up three-dimensional finite element model of a CFT arch bridge of the main bridge .The natural periods and modes of the CFT arch bridge are calculated by using the subspace iteration method. Meanwhile its modal characteristics are analyzed. Some useful conclusions are got by the calculation and analysis of the bridge for the engineering construction.

Sign in / Sign up

Export Citation Format

Share Document