The Mechanical Behavior of the Hybrid FRP Beam

2011 ◽  
Vol 365 ◽  
pp. 119-124 ◽  
Author(s):  
Yeou Fong Li ◽  
Shu Ting Kan
Keyword(s):  
Failure Mode ◽  
Bending Test ◽  
Fiber Reinforced ◽  
Hybrid Fiber ◽  
Glass Fiber Reinforced Plastic ◽  
Three Point Bending ◽  
Fiber Reinforced Plastic ◽  
Glass Fiber Reinforced ◽  
Reinforced Plastic ◽  
Force Displacement

This paper presents the mechanical behaviors of hybrid fiber reinforced plastic (HFRP) composite beams. There are two methods were proposed to increase the stiffness of pultruded glass fiber reinforced plastic (GFRP) beam and change the failure mode. The first method is to infill the epoxy mortar into the GFRP beam. The second method is hand layout the GFRP beam by using carbon fiber with different direction fibers to increase the stiffness of the GFRP beam. Three-point bending test was conducted to obtain the force-displacement relationship, stiffness, failure strength and failure mode of the GFRP beams. The test results show that the stiffness of GFRP beam filled with epoxy mortar is twice larger than GFRP beam.

The Importance of Material Structure in the Laser Cutting of Glass Fiber Reinforced Plastic Composites

1995 ◽  
Vol 117 (1) ◽  
pp. 133-138 ◽  
Author(s):  
G. Caprino ◽  
V. Tagliaferri ◽  
L. Covelli
Keyword(s):  
Experimental Data ◽  
Glass Fiber ◽  
Laser Cutting ◽  
Material Structure ◽  
Fiber Reinforced ◽  
Fiber Volume ◽  
Glass Fiber Reinforced Plastic ◽  
Fiber Reinforced Plastic ◽  
Glass Fiber Reinforced ◽  
Reinforced Plastic

A previously proposed micromechanical formula, aiming to predict the vaporization energy Qv of composite materials as a function of fiber and matrix properties and fiber volume ratio, was assessed. The experimental data, obtained on glass fiber reinforced plastic panels with different fiber contents cut by a medium power CO2 cw laser, were treated according to a procedure previously suggested, in order to evaluate Qv. An excellent agreement was found between experimental and theoretical Qv values. Theory was then used to predict the response to laser cutting of a composite material with a fiber content varying along the thickness. The theoretical predictions indicated that, in this case, the interpretation of the experimental results may be misleading, bringing to errors in the evaluation of the material thermal properties, or in the prediction of the kerf depth. Some experimental data were obtained, confirming the theoretical findings.

Fatigue of a glass-fiber-reinforced plastic under sonic-frequency vibrations

1974 ◽  
Vol 8 (6) ◽  
pp. 918-921
Author(s):  
R. P. Apinis ◽  
S. L. Skalozub ◽  
Yu. S. Urzhumtsev
Keyword(s):  
Glass Fiber ◽  
Fiber Reinforced ◽  
Glass Fiber Reinforced Plastic ◽  
Fiber Reinforced Plastic ◽  
Glass Fiber Reinforced ◽  
Reinforced Plastic

scholarly journals Development of walkway blocks with high water permeability using waste glass fiber-reinforced plastic

AIMS Energy ◽  
2018 ◽  
Vol 6 (6) ◽  
pp. 1032-1049 ◽  
Author(s):  
Yusuke Yasuda ◽  
◽  
Hayato Iwasaki ◽  
Kentaro Yasui ◽  
Ayako Tanaka ◽  
...  
Keyword(s):  
Glass Fiber ◽  
Water Permeability ◽  
High Water ◽  
Waste Glass ◽  
Fiber Reinforced ◽  
Glass Fiber Reinforced Plastic ◽  
Fiber Reinforced Plastic ◽  
Glass Fiber Reinforced ◽  
Reinforced Plastic

Shock-wave failure of a wound glass-fiber-reinforced plastic in different directions

1992 ◽  
Vol 32 (4) ◽  
pp. 616-619
Author(s):  
A. G. Ivanov ◽  
M. A. Syrunin ◽  
V. I. Luchinin
Keyword(s):  
Shock Wave ◽  
Glass Fiber ◽  
Fiber Reinforced ◽  
Glass Fiber Reinforced Plastic ◽  
Fiber Reinforced Plastic ◽  
Glass Fiber Reinforced ◽  
Reinforced Plastic
Sign in / Sign up

Export Citation Format

Share Document