Productivity Analysis of Fractured Well in Tight Oil Reservoir

2014 ◽  
Vol 893 ◽  
pp. 712-715 ◽  
Author(s):  
Yong Gao Xu ◽  
Xian Wen Li ◽  
Rui Quan Liao ◽  
Dong Jin Xu

Hydraulic fracturing is an effective technique for increasing the productivity of wells producing from low permeability and tight oil formations (Reservoir permeability is less than 0.1mD). By establishing the seepage model of vertically fractured well, concerned on the threshold pressure gradient and stress sensitivity of the reservoir, the mathematical model has been solved and the productivity equation of vertically fractured well has been obtained in the paper. The productivity analysis shows that the bigger the threshold pressure gradient, the lower the productivity of oil well; the stronger the stress sensitivity, the lower the productivity, besides, the initial productivity of oil well increases with the increasing length of the fracture, but the increase rate tends small.

2016 ◽  
Vol 35 (1) ◽  
pp. 33-53 ◽  
Author(s):  
Dan Wu ◽  
Binshan Ju ◽  
Shiqiang Wu ◽  
Eric Thompson Brantson ◽  
Yingkun Fu ◽  
...  

The inter-salt argillaceous dolomite reservoirs in the central region of China contain large abundance of oil resources with ultra-low permeability and porosity. However, the oil wells in this area show a very quick reduction with the decline of formation pressure. This article aims to investigate the main possible reasons that affect oil well productivity in the target oilfield. This study begins with analysis of capillary microscopic model, core stress sensitivity experiments, and non-Darcy percolation experiments. The impact of effective stress on permeability and porosity of the reservoir was revealed in this article. The novel productivity model and productivity evaluation model which couples stress sensitivity and threshold pressure gradient were proposed. The analysis of capillary microscopic model shows stress sensitivity of permeability to be much greater than that of porosity during the process of depressurization. The core stress sensitivity experiments results indicate that permeability and effective stress show index relationship while porosity and effective stress show binomial relationship. Damage rate and recovery rate of permeability and porosity were put forward to describe the degree of influence of stress sensitivity on permeability and porosity. The models were used to investigate the factors that affect single well productivity for the target oilfield. Application of the proposed model to this tight oilfield indicates that, the degree of influence of stress sensitivity is much greater than that of threshold pressure gradient. In addition, the greater the stress sensitivity coefficient and threshold pressure gradient are, the greater the productivity reduction will be.


2020 ◽  
Vol 142 (9) ◽  
Author(s):  
Mingda Dong ◽  
Xuedong Shi ◽  
Jie bai ◽  
Zhilong Yang ◽  
Zhilin Qi

Abstract Stress sensitivity phenomenon is an important property in low-permeability and tight reservoirs and has a large impact on the productivity of production wells, which is defined as the effect of effective stress on the reservoir parameters such as permeability, threshold pressure gradient, and rock compressibility change accordingly. Most of the previous works are focused on the effect of effective stress on permeability and threshold pressure gradient, while rock compressibility is critical of stress sensitivity but rarely noticed. A series of rock compressibility measurement experiments have been conducted, and the quantitative relationship between effective stress and rock compressibility is accurately described in this paper. In the experiment, the defects in previous experiments were eliminated by using a new-type core holder. The results show that as the effective stress increases, the rock compressibility becomes lower. Then, a stress sensitivity model that considers the effect of effective stress on rock compressibility is established due to the experimental results. The well performance of a vertical well estimated by this model shows when considering the effect of effective stress on the rock compressibility, the production rate and recovery factor are larger than those without considering it. Moreover, the effect of porosity and confining pressure on the productivity of a vertical well is also studied and discussed in this paper. The results show that the productivity of a vertical well decreases with the increase in overburden pressure, and increases with the increase in the porosity.


Energies ◽  
2020 ◽  
Vol 13 (22) ◽  
pp. 5952
Author(s):  
Qinwen Zhang ◽  
Liehui Zhang ◽  
Qiguo Liu ◽  
Youshi Jiang

It is commonly believed that matrix and natural fractures randomly distribute in carbonate gas reservoirs. In order to increase the effective connected area to the storage space as much as possible, highly deviated wells are widely used for development. Although there have been some studies on the composite model for highly deviated wells, they have not considered the effects of stress sensitivity and threshold pressure gradient in a dual-porosity gas reservoir. In this paper, a semi-analytical composite model for low permeability carbonate gas reservoir was established to study the effect of non-Darcy flow. By employing source function, Fourier transform and the perturbation method, the pressure performance and typical well test curves were obtained. Eight flow regimes were identified, and their characteristics were discussed. As a result, it can be concluded that the effects of stress sensitivity and threshold pressure gradient would make pseudo-pressure and derivative curves rise, which is the characteristic of non-Darcy flow to determine whether there is stress sensitivity or threshold pressure gradient.


Sign in / Sign up

Export Citation Format

Share Document